Bash Reference Manual

Table of Contents


Next: , Previous: (dir), Up: (dir)

Bash Features

This text is a brief description of the features that are present in the Bash shell (version 3.2, 28 September 2006).

This is Edition 3.2, last updated 28 September 2006, of The GNU Bash Reference Manual, for Bash, Version 3.2.

Bash contains features that appear in other popular shells, and some features that only appear in Bash. Some of the shells that Bash has borrowed concepts from are the Bourne Shell (sh), the Korn Shell (ksh), and the C-shell (csh and its successor, tcsh). The following menu breaks the features up into categories based upon which one of these other shells inspired the feature.

This manual is meant as a brief introduction to features found in Bash. The Bash manual page should be used as the definitive reference on shell behavior.


Next: , Previous: Top, Up: Top

1 Introduction


Next: , Up: Introduction

1.1 What is Bash?

Bash is the shell, or command language interpreter, for the gnu operating system. The name is an acronym for the ‘Bourne-Again SHell’, a pun on Stephen Bourne, the author of the direct ancestor of the current Unix shell sh, which appeared in the Seventh Edition Bell Labs Research version of Unix.

Bash is largely compatible with sh and incorporates useful features from the Korn shell ksh and the C shell csh. It is intended to be a conformant implementation of the ieee posix Shell and Tools portion of the ieee posix specification (ieee Standard 1003.1). It offers functional improvements over sh for both interactive and programming use.

While the gnu operating system provides other shells, including a version of csh, Bash is the default shell. Like other gnu software, Bash is quite portable. It currently runs on nearly every version of Unix and a few other operating systems − independently-supported ports exist for ms-dos, os/2, and Windows platforms.


Previous: What is Bash?, Up: Introduction

1.2 What is a shell?

At its base, a shell is simply a macro processor that executes commands. The term macro processor means functionality where text and symbols are expanded to create larger expressions.

A Unix shell is both a command interpreter and a programming language. As a command interpreter, the shell provides the user interface to the rich set of gnu utilities. The programming language features allow these utilitites to be combined. Files containing commands can be created, and become commands themselves. These new commands have the same status as system commands in directories such as /bin, allowing users or groups to establish custom environments to automate their common tasks.

Shells may be used interactively or non-interactively. In interactive mode, they accept input typed from the keyboard. When executing non-interactively, shells execute commands read from a file.

A shell allows execution of gnu commands, both synchronously and asynchronously. The shell waits for synchronous commands to complete before accepting more input; asynchronous commands continue to execute in parallel with the shell while it reads and executes additional commands. The redirection constructs permit fine-grained control of the input and output of those commands. Moreover, the shell allows control over the contents of commands' environments.

Shells also provide a small set of built-in commands (builtins) implementing functionality impossible or inconvenient to obtain via separate utilities. For example, cd, break, continue, and exec) cannot be implemented outside of the shell because they directly manipulate the shell itself. The history, getopts, kill, or pwd builtins, among others, could be implemented in separate utilities, but they are more convenient to use as builtin commands. All of the shell builtins are described in subsequent sections.

While executing commands is essential, most of the power (and complexity) of shells is due to their embedded programming languages. Like any high-level language, the shell provides variables, flow control constructs, quoting, and functions.

Shells offer features geared specifically for interactive use rather than to augment the programming language. These interactive features include job control, command line editing, command history and aliases. Each of these features is described in this manual.


Next: , Previous: Introduction, Up: Top

2 Definitions

These definitions are used throughout the remainder of this manual.

POSIX
A family of open system standards based on Unix. Bash is primarily concerned with the Shell and Utilities portion of the posix 1003.1 standard.
blank
A space or tab character.
builtin
A command that is implemented internally by the shell itself, rather than by an executable program somewhere in the file system.
control operator
A word that performs a control function. It is a newline or one of the following: ‘||’, ‘&&’, ‘&’, ‘;’, ‘;;’, ‘|’, ‘(’, or ‘)’.
exit status
The value returned by a command to its caller. The value is restricted to eight bits, so the maximum value is 255.
field
A unit of text that is the result of one of the shell expansions. After expansion, when executing a command, the resulting fields are used as the command name and arguments.
filename
A string of characters used to identify a file.
job
A set of processes comprising a pipeline, and any processes descended from it, that are all in the same process group.
job control
A mechanism by which users can selectively stop (suspend) and restart (resume) execution of processes.
metacharacter
A character that, when unquoted, separates words. A metacharacter is a blank or one of the following characters: ‘|’, ‘&’, ‘;’, ‘(’, ‘)’, ‘<’, or ‘>’.
name
A word consisting solely of letters, numbers, and underscores, and beginning with a letter or underscore. Names are used as shell variable and function names. Also referred to as an identifier.
operator
A control operator or a redirection operator. See Redirections, for a list of redirection operators.
process group
A collection of related processes each having the same process group id.
process group ID
A unique identifer that represents a process group during its lifetime.
reserved word
A word that has a special meaning to the shell. Most reserved words introduce shell flow control constructs, such as for and while.
return status
A synonym for exit status.
signal
A mechanism by which a process may be notified by the kernel of an event occurring in the system.
special builtin
A shell builtin command that has been classified as special by the posix standard.
token
A sequence of characters considered a single unit by the shell. It is either a word or an operator.
word
A token that is not an operator.


Next: , Previous: Definitions, Up: Top

3 Basic Shell Features

Bash is an acronym for ‘Bourne-Again SHell’. The Bourne shell is the traditional Unix shell originally written by Stephen Bourne. All of the Bourne shell builtin commands are available in Bash, The rules for evaluation and quoting are taken from the posix specification for the `standard' Unix shell.

This chapter briefly summarizes the shell's `building blocks': commands, control structures, shell functions, shell parameters, shell expansions, redirections, which are a way to direct input and output from and to named files, and how the shell executes commands.


Next: , Up: Basic Shell Features

3.1 Shell Syntax

When the shell reads input, it proceeds through a sequence of operations. If the input indicates the beginning of a comment, the shell ignores the comment symbol (‘#’), and the rest of that line.

Otherwise, roughly speaking, the shell reads its input and divides the input into words and operators, employing the quoting rules to select which meanings to assign various words and characters.

The shell then parses these tokens into commands and other constructs, removes the special meaning of certain words or characters, expands others, redirects input and output as needed, executes the specified command, waits for the command's exit status, and makes that exit status available for further inspection or processing.


Next: , Up: Shell Syntax

3.1.1 Shell Operation

The following is a brief description of the shell's operation when it reads and executes a command. Basically, the shell does the following:

  1. Reads its input from a file (see Shell Scripts), from a string supplied as an argument to the -c invocation option (see Invoking Bash), or from the user's terminal.
  2. Breaks the input into words and operators, obeying the quoting rules described in Quoting. These tokens are separated by metacharacters. Alias expansion is performed by this step (see Aliases).
  3. Parses the tokens into simple and compound commands (see Shell Commands).
  4. Performs the various shell expansions (see Shell Expansions), breaking the expanded tokens into lists of filenames (see Filename Expansion) and commands and arguments.
  5. Performs any necessary redirections (see Redirections) and removes the redirection operators and their operands from the argument list.
  6. Executes the command (see Executing Commands).
  7. Optionally waits for the command to complete and collects its exit status (see Exit Status).


Next: , Previous: Shell Operation, Up: Shell Syntax

3.1.2 Quoting

Quoting is used to remove the special meaning of certain characters or words to the shell. Quoting can be used to disable special treatment for special characters, to prevent reserved words from being recognized as such, and to prevent parameter expansion.

Each of the shell metacharacters (see Definitions) has special meaning to the shell and must be quoted if it is to represent itself. When the command history expansion facilities are being used (see History Interaction), the history expansion character, usually ‘!’, must be quoted to prevent history expansion. See Bash History Facilities, for more details concerning history expansion.

There are three quoting mechanisms: the escape character, single quotes, and double quotes.


Next: , Up: Quoting
3.1.2.1 Escape Character

A non-quoted backslash ‘\’ is the Bash escape character. It preserves the literal value of the next character that follows, with the exception of newline. If a \newline pair appears, and the backslash itself is not quoted, the \newline is treated as a line continuation (that is, it is removed from the input stream and effectively ignored).


Next: , Previous: Escape Character, Up: Quoting
3.1.2.2 Single Quotes

Enclosing characters in single quotes (‘'’) preserves the literal value of each character within the quotes. A single quote may not occur between single quotes, even when preceded by a backslash.


Next: , Previous: Single Quotes, Up: Quoting
3.1.2.3 Double Quotes

Enclosing characters in double quotes (‘"’) preserves the literal value of all characters within the quotes, with the exception of ‘$’, ‘`’, ‘\’, and, when history expansion is enabled, ‘!’. The characters ‘$’ and ‘`’ retain their special meaning within double quotes (see Shell Expansions). The backslash retains its special meaning only when followed by one of the following characters: ‘$’, ‘`’, ‘"’, ‘\’, or newline. Within double quotes, backslashes that are followed by one of these characters are removed. Backslashes preceding characters without a special meaning are left unmodified. A double quote may be quoted within double quotes by preceding it with a backslash. If enabled, history expansion will be performed unless an ‘!’ appearing in double quotes is escaped using a backslash. The backslash preceding the ‘!’ is not removed.

The special parameters ‘*’ and ‘@’ have special meaning when in double quotes (see Shell Parameter Expansion).


Next: , Previous: Double Quotes, Up: Quoting
3.1.2.4 ANSI-C Quoting

Words of the form $'string' are treated specially. The word expands to string, with backslash-escaped characters replaced as specified by the ANSI C standard. Backslash escape sequences, if present, are decoded as follows:

\a
alert (bell)
\b
backspace
\e
an escape character (not ANSI C)
\f
form feed
\n
newline
\r
carriage return
\t
horizontal tab
\v
vertical tab
\\
backslash
\'
single quote
\nnn
the eight-bit character whose value is the octal value nnn (one to three digits)
\xHH
the eight-bit character whose value is the hexadecimal value HH (one or two hex digits)
\cx
a control-x character

The expanded result is single-quoted, as if the dollar sign had not been present.


Previous: ANSI-C Quoting, Up: Quoting
3.1.2.5 Locale-Specific Translation

A double-quoted string preceded by a dollar sign (‘$’) will cause the string to be translated according to the current locale. If the current locale is C or POSIX, the dollar sign is ignored. If the string is translated and replaced, the replacement is double-quoted.

Some systems use the message catalog selected by the LC_MESSAGES shell variable. Others create the name of the message catalog from the value of the TEXTDOMAIN shell variable, possibly adding a suffix of ‘.mo’. If you use the TEXTDOMAIN variable, you may need to set the TEXTDOMAINDIR variable to the location of the message catalog files. Still others use both variables in this fashion: TEXTDOMAINDIR/LC_MESSAGES/LC_MESSAGES/TEXTDOMAIN.mo.


Previous: Quoting, Up: Shell Syntax

3.1.3 Comments

In a non-interactive shell, or an interactive shell in which the interactive_comments option to the shopt builtin is enabled (see Bash Builtins), a word beginning with ‘#’ causes that word and all remaining characters on that line to be ignored. An interactive shell without the interactive_comments option enabled does not allow comments. The interactive_comments option is on by default in interactive shells. See Interactive Shells, for a description of what makes a shell interactive.


Next: , Previous: Shell Syntax, Up: Basic Shell Features

3.2 Shell Commands

A simple shell command such as echo a b c consists of the command itself followed by arguments, separated by spaces.

More complex shell commands are composed of simple commands arranged together in a variety of ways: in a pipeline in which the output of one command becomes the input of a second, in a loop or conditional construct, or in some other grouping.


Next: , Up: Shell Commands

3.2.1 Simple Commands

A simple command is the kind of command encountered most often. It's just a sequence of words separated by blanks, terminated by one of the shell's control operators (see Definitions). The first word generally specifies a command to be executed, with the rest of the words being that command's arguments.

The return status (see Exit Status) of a simple command is its exit status as provided by the posix 1003.1 waitpid function, or 128+n if the command was terminated by signal n.


Next: , Previous: Simple Commands, Up: Shell Commands

3.2.2 Pipelines

A pipeline is a sequence of simple commands separated by ‘|’.

The format for a pipeline is

     [time [-p]] [!] command1 [| command2 ...]

The output of each command in the pipeline is connected via a pipe to the input of the next command. That is, each command reads the previous command's output.

The reserved word time causes timing statistics to be printed for the pipeline once it finishes. The statistics currently consist of elapsed (wall-clock) time and user and system time consumed by the command's execution. The -p option changes the output format to that specified by posix. The TIMEFORMAT variable may be set to a format string that specifies how the timing information should be displayed. See Bash Variables, for a description of the available formats. The use of time as a reserved word permits the timing of shell builtins, shell functions, and pipelines. An external time command cannot time these easily.

If the pipeline is not executed asynchronously (see Lists), the shell waits for all commands in the pipeline to complete.

Each command in a pipeline is executed in its own subshell (see Command Execution Environment). The exit status of a pipeline is the exit status of the last command in the pipeline, unless the pipefail option is enabled (see The Set Builtin). If pipefail is enabled, the pipeline's return status is the value of the last (rightmost) command to exit with a non-zero status, or zero if all commands exit successfully. If the reserved word ‘!’ precedes the pipeline, the exit status is the logical negation of the exit status as described above. The shell waits for all commands in the pipeline to terminate before returning a value.


Next: , Previous: Pipelines, Up: Shell Commands

3.2.3 Lists of Commands

A list is a sequence of one or more pipelines separated by one of the operators ‘;’, ‘&’, ‘&&’, or ‘||’, and optionally terminated by one of ‘;’, ‘&’, or a newline.

Of these list operators, ‘&&’ and ‘||’ have equal precedence, followed by ‘;’ and ‘&’, which have equal precedence.

A sequence of one or more newlines may appear in a list to delimit commands, equivalent to a semicolon.

If a command is terminated by the control operator ‘&’, the shell executes the command asynchronously in a subshell. This is known as executing the command in the background. The shell does not wait for the command to finish, and the return status is 0 (true). When job control is not active (see Job Control), the standard input for asynchronous commands, in the absence of any explicit redirections, is redirected from /dev/null.

Commands separated by a ‘;’ are executed sequentially; the shell waits for each command to terminate in turn. The return status is the exit status of the last command executed.

The control operators ‘&&’ and ‘||’ denote and lists and or lists, respectively. An and list has the form

     command1 && command2

command2 is executed if, and only if, command1 returns an exit status of zero.

An or list has the form

     command1 || command2

command2 is executed if, and only if, command1 returns a non-zero exit status.

The return status of and and or lists is the exit status of the last command executed in the list.


Previous: Lists, Up: Shell Commands

3.2.4 Compound Commands

Compound commands are the shell programming constructs. Each construct begins with a reserved word or control operator and is terminated by a corresponding reserved word or operator. Any redirections (see Redirections) associated with a compound command apply to all commands within that compound command unless explicitly overridden.

Bash provides looping constructs, conditional commands, and mechanisms to group commands and execute them as a unit.


Next: , Up: Compound Commands
3.2.4.1 Looping Constructs

Bash supports the following looping constructs.

Note that wherever a ‘;’ appears in the description of a command's syntax, it may be replaced with one or more newlines.

until
The syntax of the until command is:
          until test-commands; do consequent-commands; done

Execute consequent-commands as long as test-commands has an exit status which is not zero. The return status is the exit status of the last command executed in consequent-commands, or zero if none was executed.

while
The syntax of the while command is:
          while test-commands; do consequent-commands; done

Execute consequent-commands as long as test-commands has an exit status of zero. The return status is the exit status of the last command executed in consequent-commands, or zero if none was executed.

for
The syntax of the for command is:
          for name [in words ...]; do commands; done

Expand words, and execute commands once for each member in the resultant list, with name bound to the current member. If ‘in words’ is not present, the for command executes the commands once for each positional parameter that is set, as if ‘in "$@"’ had been specified (see Special Parameters). The return status is the exit status of the last command that executes. If there are no items in the expansion of words, no commands are executed, and the return status is zero.

An alternate form of the for command is also supported:

          for (( expr1 ; expr2 ; expr3 )) ; do commands ; done

First, the arithmetic expression expr1 is evaluated according to the rules described below (see Shell Arithmetic). The arithmetic expression expr2 is then evaluated repeatedly until it evaluates to zero. Each time expr2 evaluates to a non-zero value, commands are executed and the arithmetic expression expr3 is evaluated. If any expression is omitted, it behaves as if it evaluates to 1. The return value is the exit status of the last command in list that is executed, or false if any of the expressions is invalid.

The break and continue builtins (see Bourne Shell Builtins) may be used to control loop execution.


Next: , Previous: Looping Constructs, Up: Compound Commands
3.2.4.2 Conditional Constructs

if
The syntax of the if command is:
          if test-commands; then
            consequent-commands;
          [elif more-test-commands; then
            more-consequents;]
          [else alternate-consequents;]
          fi

The test-commands list is executed, and if its return status is zero, the consequent-commands list is executed. If test-commands returns a non-zero status, each elif list is executed in turn, and if its exit status is zero, the corresponding more-consequents is executed and the command completes. If ‘else alternate-consequents’ is present, and the final command in the final if or elif clause has a non-zero exit status, then alternate-consequents is executed. The return status is the exit status of the last command executed, or zero if no condition tested true.

case
The syntax of the case command is:
          case word in [ [(] pattern [| pattern]...) command-list ;;]... esac

case will selectively execute the command-list corresponding to the first pattern that matches word. If the shell option nocasematch (see the description of shopt in Bash Builtins) is enabled, the match is performed without regard to the case of alphabetic characters. The ‘|’ is used to separate multiple patterns, and the ‘)’ operator terminates a pattern list. A list of patterns and an associated command-list is known as a clause. Each clause must be terminated with ‘;;’. The word undergoes tilde expansion, parameter expansion, command substitution, arithmetic expansion, and quote removal before matching is attempted. Each pattern undergoes tilde expansion, parameter expansion, command substitution, and arithmetic expansion.

There may be an arbitrary number of case clauses, each terminated by a ‘;;’. The first pattern that matches determines the command-list that is executed.

Here is an example using case in a script that could be used to describe one interesting feature of an animal:

          echo -n "Enter the name of an animal: "
          read ANIMAL
          echo -n "The $ANIMAL has "
          case $ANIMAL in
            horse | dog | cat) echo -n "four";;
            man | kangaroo ) echo -n "two";;
            *) echo -n "an unknown number of";;
          esac
          echo " legs."

The return status is zero if no pattern is matched. Otherwise, the return status is the exit status of the command-list executed.

select
The select construct allows the easy generation of menus. It has almost the same syntax as the for command:
          select name [in words ...]; do commands; done

The list of words following in is expanded, generating a list of items. The set of expanded words is printed on the standard error output stream, each preceded by a number. If the ‘in words’ is omitted, the positional parameters are printed, as if ‘in "$@"’ had been specifed. The PS3 prompt is then displayed and a line is read from the standard input. If the line consists of a number corresponding to one of the displayed words, then the value of name is set to that word. If the line is empty, the words and prompt are displayed again. If EOF is read, the select command completes. Any other value read causes name to be set to null. The line read is saved in the variable REPLY.

The commands are executed after each selection until a break command is executed, at which point the select command completes.

Here is an example that allows the user to pick a filename from the current directory, and displays the name and index of the file selected.

          select fname in *;
          do
          	echo you picked $fname \($REPLY\)
          	break;
          done

((...))
          (( expression ))

The arithmetic expression is evaluated according to the rules described below (see Shell Arithmetic). If the value of the expression is non-zero, the return status is 0; otherwise the return status is 1. This is exactly equivalent to

          let "expression"

See Bash Builtins, for a full description of the let builtin.

[[...]]
          [[ expression ]]

Return a status of 0 or 1 depending on the evaluation of the conditional expression expression. Expressions are composed of the primaries described below in Bash Conditional Expressions. Word splitting and filename expansion are not performed on the words between the ‘[[’ and ‘]]’; tilde expansion, parameter and variable expansion, arithmetic expansion, command substitution, process substitution, and quote removal are performed. Conditional operators such as ‘-f’ must be unquoted to be recognized as primaries.

When the ‘==’ and ‘!=’ operators are used, the string to the right of the operator is considered a pattern and matched according to the rules described below in Pattern Matching. If the shell option nocasematch (see the description of shopt in Bash Builtins) is enabled, the match is performed without regard to the case of alphabetic characters. The return value is 0 if the string matches (‘==’) or does not match (‘!=’)the pattern, and 1 otherwise. Any part of the pattern may be quoted to force it to be matched as a string.

An additional binary operator, ‘=~’, is available, with the same precedence as ‘==’ and ‘!=’. When it is used, the string to the right of the operator is considered an extended regular expression and matched accordingly (as in regex3)). The return value is 0 if the string matches the pattern, and 1 otherwise. If the regular expression is syntactically incorrect, the conditional expression's return value is 2. If the shell option nocasematch (see the description of shopt in Bash Builtins) is enabled, the match is performed without regard to the case of alphabetic characters. Substrings matched by parenthesized subexpressions within the regular expression are saved in the array variable BASH_REMATCH. The element of BASH_REMATCH with index 0 is the portion of the string matching the entire regular expression. The element of BASH_REMATCH with index n is the portion of the string matching the nth parenthesized subexpression.

Expressions may be combined using the following operators, listed in decreasing order of precedence:

( expression )
Returns the value of expression. This may be used to override the normal precedence of operators.
! expression
True if expression is false.
expression1 && expression2
True if both expression1 and expression2 are true.
expression1 || expression2
True if either expression1 or expression2 is true.
The && and || operators do not evaluate expression2 if the value of expression1 is sufficient to determine the return value of the entire conditional expression.


Previous: Conditional Constructs, Up: Compound Commands
3.2.4.3 Grouping Commands

Bash provides two ways to group a list of commands to be executed as a unit. When commands are grouped, redirections may be applied to the entire command list. For example, the output of all the commands in the list may be redirected to a single stream.

()
          ( list )

Placing a list of commands between parentheses causes a subshell environment to be created (see Command Execution Environment), and each of the commands in list to be executed in that subshell. Since the list is executed in a subshell, variable assignments do not remain in effect after the subshell completes.

{}
          { list; }

Placing a list of commands between curly braces causes the list to be executed in the current shell context. No subshell is created. The semicolon (or newline) following list is required.

In addition to the creation of a subshell, there is a subtle difference between these two constructs due to historical reasons. The braces are reserved words, so they must be separated from the list by blanks. The parentheses are operators, and are recognized as separate tokens by the shell even if they are not separated from the list by whitespace.

The exit status of both of these constructs is the exit status of list.


Next: , Previous: Shell Commands, Up: Basic Shell Features

3.3 Shell Functions

Shell functions are a way to group commands for later execution using a single name for the group. They are executed just like a "regular" command. When the name of a shell function is used as a simple command name, the list of commands associated with that function name is executed. Shell functions are executed in the current shell context; no new process is created to interpret them.

Functions are declared using this syntax:

     [ function ] name () compound-command [ redirections ]

This defines a shell function named name. The reserved word function is optional. If the function reserved word is supplied, the parentheses are optional. The body of the function is the compound command compound-command (see Compound Commands). That command is usually a list enclosed between { and }, but may be any compound command listed above. compound-command is executed whenever name is specified as the name of a command. Any redirections (see Redirections) associated with the shell function are performed when the function is executed.

A function definition may be deleted using the -f option to the unset builtin (see Bourne Shell Builtins).

The exit status of a function definition is zero unless a syntax error occurs or a readonly function with the same name already exists. When executed, the exit status of a function is the exit status of the last command executed in the body.

Note that for historical reasons, in the most common usage the curly braces that surround the body of the function must be separated from the body by blanks or newlines. This is because the braces are reserved words and are only recognized as such when they are separated by whitespace. Also, when using the braces, the list must be terminated by a semicolon, a ‘&’, or a newline.

When a function is executed, the arguments to the function become the positional parameters during its execution (see Positional Parameters). The special parameter ‘#’ that expands to the number of positional parameters is updated to reflect the change. Special parameter 0 is unchanged. The first element of the FUNCNAME variable is set to the name of the function while the function is executing. All other aspects of the shell execution environment are identical between a function and its caller with the exception that the DEBUG and RETURN traps are not inherited unless the function has been given the trace attribute using the declare builtin or the -o functrace option has been enabled with the set builtin, (in which case all functions inherit the DEBUG and RETURN traps). See Bourne Shell Builtins, for the description of the trap builtin.

If the builtin command return is executed in a function, the function completes and execution resumes with the next command after the function call. Any command associated with the RETURN trap is executed before execution resumes. When a function completes, the values of the positional parameters and the special parameter ‘#’ are restored to the values they had prior to the function's execution. If a numeric argument is given to return, that is the function's return status; otherwise the function's return status is the exit status of the last command executed before the return.

Variables local to the function may be declared with the local builtin. These variables are visible only to the function and the commands it invokes.

Function names and definitions may be listed with the -f option to the declare or typeset builtin commands (see Bash Builtins). The -F option to declare or typeset will list the function names only (and optionally the source file and line number, if the extdebug shell option is enabled). Functions may be exported so that subshells automatically have them defined with the -f option to the export builtin (see Bourne Shell Builtins). Note that shell functions and variables with the same name may result in multiple identically-named entries in the environment passed to the shell's children. Care should be taken in cases where this may cause a problem.

Functions may be recursive. No limit is placed on the number of recursive calls.


Next: , Previous: Shell Functions, Up: Basic Shell Features

3.4 Shell Parameters

A parameter is an entity that stores values. It can be a name, a number, or one of the special characters listed below. A variable is a parameter denoted by a name. A variable has a value and zero or more attributes. Attributes are assigned using the declare builtin command (see the description of the declare builtin in Bash Builtins).

A parameter is set if it has been assigned a value. The null string is a valid value. Once a variable is set, it may be unset only by using the unset builtin command.

A variable may be assigned to by a statement of the form

     name=[value]

If value is not given, the variable is assigned the null string. All values undergo tilde expansion, parameter and variable expansion, command substitution, arithmetic expansion, and quote removal (detailed below). If the variable has its integer attribute set, then value is evaluated as an arithmetic expression even if the $((...)) expansion is not used (see Arithmetic Expansion). Word splitting is not performed, with the exception of "$@" as explained below. Filename expansion is not performed. Assignment statements may also appear as arguments to the alias, declare, typeset, export, readonly, and local builtin commands.

In the context where an assignment statement is assigning a value to a shell variable or array index (see Arrays), the ‘+=’ operator can be used to append to or add to the variable's previous value. When ‘+=’ is applied to a variable for which the integer attribute has been set, value is evaluated as an arithmetic expression and added to the variable's current value, which is also evaluated. When ‘+=’ is applied to an array variable using compound assignment (see Arrays), the variable's value is not unset (as it is when using ‘=’), and new values are appended to the array beginning at one greater than the array's maximum index. When applied to a string-valued variable, value is expanded and appended to the variable's value.


Next: , Up: Shell Parameters

3.4.1 Positional Parameters

A positional parameter is a parameter denoted by one or more digits, other than the single digit 0. Positional parameters are assigned from the shell's arguments when it is invoked, and may be reassigned using the set builtin command. Positional parameter N may be referenced as ${N}, or as $N when N consists of a single digit. Positional parameters may not be assigned to with assignment statements. The set and shift builtins are used to set and unset them (see Shell Builtin Commands). The positional parameters are temporarily replaced when a shell function is executed (see Shell Functions).

When a positional parameter consisting of more than a single digit is expanded, it must be enclosed in braces.


Previous: Positional Parameters, Up: Shell Parameters

3.4.2 Special Parameters

The shell treats several parameters specially. These parameters may only be referenced; assignment to them is not allowed.

*
Expands to the positional parameters, starting from one. When the expansion occurs within double quotes, it expands to a single word with the value of each parameter separated by the first character of the IFS special variable. That is, "$*" is equivalent to "$1c$2c...", where c is the first character of the value of the IFS variable. If IFS is unset, the parameters are separated by spaces. If IFS is null, the parameters are joined without intervening separators.
@
Expands to the positional parameters, starting from one. When the expansion occurs within double quotes, each parameter expands to a separate word. That is, "$@" is equivalent to "$1" "$2" .... If the double-quoted expansion occurs within a word, the expansion of the first parameter is joined with the beginning part of the original word, and the expansion of the last parameter is joined with the last part of the original word. When there are no positional parameters, "$@" and $@ expand to nothing (i.e., they are removed).
#
Expands to the number of positional parameters in decimal.
?
Expands to the exit status of the most recently executed foreground pipeline.
-
(A hyphen.) Expands to the current option flags as specified upon invocation, by the set builtin command, or those set by the shell itself (such as the -i option).
$
Expands to the process id of the shell. In a () subshell, it expands to the process id of the invoking shell, not the subshell.
!
Expands to the process id of the most recently executed background (asynchronous) command.
0
Expands to the name of the shell or shell script. This is set at shell initialization. If Bash is invoked with a file of commands (see Shell Scripts), $0 is set to the name of that file. If Bash is started with the -c option (see Invoking Bash), then $0 is set to the first argument after the string to be executed, if one is present. Otherwise, it is set to the filename used to invoke Bash, as given by argument zero.
_
(An underscore.) At shell startup, set to the absolute pathname used to invoke the shell or shell script being executed as passed in the environment or argument list. Subsequently, expands to the last argument to the previous command, after expansion. Also set to the full pathname used to invoke each command executed and placed in the environment exported to that command. When checking mail, this parameter holds the name of the mail file.


Next: , Previous: Shell Parameters, Up: Basic Shell Features

3.5 Shell Expansions

Expansion is performed on the command line after it has been split into tokens. There are seven kinds of expansion performed:

The order of expansions is: brace expansion, tilde expansion, parameter, variable, and arithmetic expansion and command substitution (done in a left-to-right fashion), word splitting, and filename expansion.

On systems that can support it, there is an additional expansion available: process substitution. This is performed at the same time as parameter, variable, and arithmetic expansion and command substitution.

Only brace expansion, word splitting, and filename expansion can change the number of words of the expansion; other expansions expand a single word to a single word. The only exceptions to this are the expansions of "$@" (see Special Parameters) and "${name[@]}" (see Arrays).

After all expansions, quote removal (see Quote Removal) is performed.


Next: , Up: Shell Expansions

3.5.1 Brace Expansion

Brace expansion is a mechanism by which arbitrary strings may be generated. This mechanism is similar to filename expansion (see Filename Expansion), but the file names generated need not exist. Patterns to be brace expanded take the form of an optional preamble, followed by either a series of comma-separated strings or a sequnce expression between a pair of braces, followed by an optional postscript. The preamble is prefixed to each string contained within the braces, and the postscript is then appended to each resulting string, expanding left to right.

Brace expansions may be nested. The results of each expanded string are not sorted; left to right order is preserved. For example,

     bash$ echo a{d,c,b}e
     ade ace abe

A sequence expression takes the form {x..y}, where x and y are either integers or single characters. When integers are supplied, the expression expands to each number between x and y, inclusive. When characters are supplied, the expression expands to each character lexicographically between x and y, inclusive. Note that both x and y must be of the same type.

Brace expansion is performed before any other expansions, and any characters special to other expansions are preserved in the result. It is strictly textual. Bash does not apply any syntactic interpretation to the context of the expansion or the text between the braces. To avoid conflicts with parameter expansion, the string ‘${’ is not considered eligible for brace expansion.

A correctly-formed brace expansion must contain unquoted opening and closing braces, and at least one unquoted comma or a valid sequence expression. Any incorrectly formed brace expansion is left unchanged.

A { or ‘,’ may be quoted with a backslash to prevent its being considered part of a brace expression. To avoid conflicts with parameter expansion, the string ‘${’ is not considered eligible for brace expansion.

This construct is typically used as shorthand when the common prefix of the strings to be generated is longer than in the above example:

     mkdir /usr/local/src/bash/{old,new,dist,bugs}

or

     chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}


Next: , Previous: Brace Expansion, Up: Shell Expansions

3.5.2 Tilde Expansion

If a word begins with an unquoted tilde character (‘~’), all of the characters up to the first unquoted slash (or all characters, if there is no unquoted slash) are considered a tilde-prefix. If none of the characters in the tilde-prefix are quoted, the characters in the tilde-prefix following the tilde are treated as a possible login name. If this login name is the null string, the tilde is replaced with the value of the HOME shell variable. If HOME is unset, the home directory of the user executing the shell is substituted instead. Otherwise, the tilde-prefix is replaced with the home directory associated with the specified login name.

If the tilde-prefix is ‘~+’, the value of the shell variable PWD replaces the tilde-prefix. If the tilde-prefix is ‘~-’, the value of the shell variable OLDPWD, if it is set, is substituted.

If the characters following the tilde in the tilde-prefix consist of a number N, optionally prefixed by a ‘+’ or a ‘-’, the tilde-prefix is replaced with the corresponding element from the directory stack, as it would be displayed by the dirs builtin invoked with the characters following tilde in the tilde-prefix as an argument (see The Directory Stack). If the tilde-prefix, sans the tilde, consists of a number without a leading ‘+’ or ‘-’, ‘+’ is assumed.

If the login name is invalid, or the tilde expansion fails, the word is left unchanged.

Each variable assignment is checked for unquoted tilde-prefixes immediately following a ‘:’ or the first ‘=’. In these cases, tilde expansion is also performed. Consequently, one may use file names with tildes in assignments to PATH, MAILPATH, and CDPATH, and the shell assigns the expanded value.

The following table shows how Bash treats unquoted tilde-prefixes:

~
The value of $HOME
~/foo
$HOME/foo
~fred/foo
The subdirectory foo of the home directory of the user fred
~+/foo
$PWD/foo
~-/foo
${OLDPWD-'~-'}/foo
~N
The string that would be displayed by ‘dirs +N
~+N
The string that would be displayed by ‘dirs +N
~-N
The string that would be displayed by ‘dirs -N


Next: , Previous: Tilde Expansion, Up: Shell Expansions

3.5.3 Shell Parameter Expansion

The ‘$’ character introduces parameter expansion, command substitution, or arithmetic expansion. The parameter name or symbol to be expanded may be enclosed in braces, which are optional but serve to protect the variable to be expanded from characters immediately following it which could be interpreted as part of the name.

When braces are used, the matching ending brace is the first ‘}’ not escaped by a backslash or within a quoted string, and not within an embedded arithmetic expansion, command substitution, or parameter expansion.

The basic form of parameter expansion is ${parameter}. The value of parameter is substituted. The braces are required when parameter is a positional parameter with more than one digit, or when parameter is followed by a character that is not to be interpreted as part of its name.

If the first character of parameter is an exclamation point, a level of variable indirection is introduced. Bash uses the value of the variable formed from the rest of parameter as the name of the variable; this variable is then expanded and that value is used in the rest of the substitution, rather than the value of parameter itself. This is known as indirect expansion. The exceptions to this are the expansions of ${!prefix*} and ${!name[@]} described below. The exclamation point must immediately follow the left brace in order to introduce indirection.

In each of the cases below, word is subject to tilde expansion, parameter expansion, command substitution, and arithmetic expansion.

When not performing substring expansion, Bash tests for a parameter that is unset or null; omitting the colon results in a test only for a parameter that is unset. Put another way, if the colon is included, the operator tests for both existence and that the value is not null; if the colon is omitted, the operator tests only for existence.

${parameter:−word}
If parameter is unset or null, the expansion of word is substituted. Otherwise, the value of parameter is substituted.
${parameter:=word}
If parameter is unset or null, the expansion of word is assigned to parameter. The value of parameter is then substituted. Positional parameters and special parameters may not be assigned to in this way.
${parameter:?word}
If parameter is null or unset, the expansion of word (or a message to that effect if word is not present) is written to the standard error and the shell, if it is not interactive, exits. Otherwise, the value of parameter is substituted.
${parameter:+word}
If parameter is null or unset, nothing is substituted, otherwise the expansion of word is substituted.
${parameter:offset}
${parameter:offset:length}
Expands to up to length characters of parameter starting at the character specified by offset. If length is omitted, expands to the substring of parameter starting at the character specified by offset. length and offset are arithmetic expressions (see Shell Arithmetic). This is referred to as Substring Expansion.

length must evaluate to a number greater than or equal to zero. If offset evaluates to a number less than zero, the value is used as an offset from the end of the value of parameter. If parameter is ‘@’, the result is length positional parameters beginning at offset. If parameter is an array name indexed by ‘@’ or ‘*’, the result is the length members of the array beginning with ${parameter[offset]}. A negative offset is taken relative to one greater than the maximum index of the specified array. Note that a negative offset must be separated from the colon by at least one space to avoid being confused with the ‘:-’ expansion. Substring indexing is zero-based unless the positional parameters are used, in which case the indexing starts at 1.

${!prefix*}
${!prefix@}
Expands to the names of variables whose names begin with prefix, separated by the first character of the IFS special variable.
${!name[@]}
${!name[*]}
If name is an array variable, expands to the list of array indices (keys) assigned in name. If name is not an array, expands to 0 if name is set and null otherwise. When ‘@’ is used and the expansion appears within double quotes, each key expands to a separate word.
${#parameter}
The length in characters of the expanded value of parameter is substituted. If parameter is ‘*’ or ‘@’, the value substituted is the number of positional parameters. If parameter is an array name subscripted by ‘*’ or ‘@’, the value substituted is the number of elements in the array.
${parameter#word}
${parameter##word}
The word is expanded to produce a pattern just as in filename expansion (see Filename Expansion). If the pattern matches the beginning of the expanded value of parameter, then the result of the expansion is the expanded value of parameter with the shortest matching pattern (the ‘#’ case) or the longest matching pattern (the ‘##’ case) deleted. If parameter is ‘@’ or ‘*’, the pattern removal operation is applied to each positional parameter in turn, and the expansion is the resultant list. If parameter is an array variable subscripted with ‘@’ or ‘*’, the pattern removal operation is applied to each member of the array in turn, and the expansion is the resultant list.
${parameter%word}
${parameter%%word}
The word is expanded to produce a pattern just as in filename expansion. If the pattern matches a trailing portion of the expanded value of parameter, then the result of the expansion is the value of parameter with the shortest matching pattern (the ‘%’ case) or the longest matching pattern (the ‘%%’ case) deleted. If parameter is ‘@’ or ‘*’, the pattern removal operation is applied to each positional parameter in turn, and the expansion is the resultant list. If parameter is an array variable subscripted with ‘@’ or ‘*’, the pattern removal operation is applied to each member of the array in turn, and the expansion is the resultant list.
${parameter/pattern/string}
The pattern is expanded to produce a pattern just as in filename expansion. Parameter is expanded and the longest match of pattern against its value is replaced with string. If pattern begins with ‘/’, all matches of pattern are replaced with string. Normally only the first match is replaced. If pattern begins with ‘#’, it must match at the beginning of the expanded value of parameter. If pattern begins with ‘%’, it must match at the end of the expanded value of parameter. If string is null, matches of pattern are deleted and the / following pattern may be omitted. If parameter is ‘@’ or ‘*’, the substitution operation is applied to each positional parameter in turn, and the expansion is the resultant list. If parameter is an array variable subscripted with ‘@’ or ‘*’, the substitution operation is applied to each member of the array in turn, and the expansion is the resultant list.


Next: , Previous: Shell Parameter Expansion, Up: Shell Expansions

3.5.4 Command Substitution

Command substitution allows the output of a command to replace the command itself. Command substitution occurs when a command is enclosed as follows:

     $(command)

or

     `command`

Bash performs the expansion by executing command and replacing the command substitution with the standard output of the command, with any trailing newlines deleted. Embedded newlines are not deleted, but they may be removed during word splitting. The command substitution $(cat file) can be replaced by the equivalent but faster $(< file).

When the old-style backquote form of substitution is used, backslash retains its literal meaning except when followed by ‘$’, ‘`’, or ‘\’. The first backquote not preceded by a backslash terminates the command substitution. When using the $(command) form, all characters between the parentheses make up the command; none are treated specially.

Command substitutions may be nested. To nest when using the backquoted form, escape the inner backquotes with backslashes.

If the substitution appears within double quotes, word splitting and filename expansion are not performed on the results.


Next: , Previous: Command Substitution, Up: Shell Expansions

3.5.5 Arithmetic Expansion

Arithmetic expansion allows the evaluation of an arithmetic expression and the substitution of the result. The format for arithmetic expansion is:

     $(( expression ))

The expression is treated as if it were within double quotes, but a double quote inside the parentheses is not treated specially. All tokens in the expression undergo parameter expansion, command substitution, and quote removal. Arithmetic expansions may be nested.

The evaluation is performed according to the rules listed below (see Shell Arithmetic). If the expression is invalid, Bash prints a message indicating failure to the standard error and no substitution occurs.


Next: , Previous: Arithmetic Expansion, Up: Shell Expansions

3.5.6 Process Substitution

Process substitution is supported on systems that support named pipes (fifos) or the /dev/fd method of naming open files. It takes the form of

     <(list)

or

     >(list)

The process list is run with its input or output connected to a fifo or some file in /dev/fd. The name of this file is passed as an argument to the current command as the result of the expansion. If the >(list) form is used, writing to the file will provide input for list. If the <(list) form is used, the file passed as an argument should be read to obtain the output of list. Note that no space may appear between the < or > and the left parenthesis, otherwise the construct would be interpreted as a redirection.

When available, process substitution is performed simultaneously with parameter and variable expansion, command substitution, and arithmetic expansion.


Next: , Previous: Process Substitution, Up: Shell Expansions

3.5.7 Word Splitting

The shell scans the results of parameter expansion, command substitution, and arithmetic expansion that did not occur within double quotes for word splitting.

The shell treats each character of $IFS as a delimiter, and splits the results of the other expansions into words on these characters. If IFS is unset, or its value is exactly <space><tab><newline>, the default, then any sequence of IFS characters serves to delimit words. If IFS has a value other than the default, then sequences of the whitespace characters space and tab are ignored at the beginning and end of the word, as long as the whitespace character is in the value of IFS (an IFS whitespace character). Any character in IFS that is not IFS whitespace, along with any adjacent IFS whitespace characters, delimits a field. A sequence of IFS whitespace characters is also treated as a delimiter. If the value of IFS is null, no word splitting occurs.

Explicit null arguments ("" or '') are retained. Unquoted implicit null arguments, resulting from the expansion of parameters that have no values, are removed. If a parameter with no value is expanded within double quotes, a null argument results and is retained.

Note that if no expansion occurs, no splitting is performed.


Next: , Previous: Word Splitting, Up: Shell Expansions

3.5.8 Filename Expansion

After word splitting, unless the -f option has been set (see The Set Builtin), Bash scans each word for the characters ‘*’, ‘?’, and ‘[’. If one of these characters appears, then the word is regarded as a pattern, and replaced with an alphabetically sorted list of file names matching the pattern. If no matching file names are found, and the shell option nullglob is disabled, the word is left unchanged. If the nullglob option is set, and no matches are found, the word is removed. If the failglob shell option is set, and no matches are found, an error message is printed and the command is not executed. If the shell option nocaseglob is enabled, the match is performed without regard to the case of alphabetic characters.

When a pattern is used for filename generation, the character ‘.’ at the start of a filename or immediately following a slash must be matched explicitly, unless the shell option dotglob is set. When matching a file name, the slash character must always be matched explicitly. In other cases, the ‘.’ character is not treated specially.

See the description of shopt in Bash Builtins, for a description of the nocaseglob, nullglob, failglob, and dotglob options.

The GLOBIGNORE shell variable may be used to restrict the set of filenames matching a pattern. If GLOBIGNORE is set, each matching filename that also matches one of the patterns in GLOBIGNORE is removed from the list of matches. The filenames . and .. are always ignored when GLOBIGNORE is set and not null. However, setting GLOBIGNORE to a non-null value has the effect of enabling the dotglob shell option, so all other filenames beginning with a ‘.’ will match. To get the old behavior of ignoring filenames beginning with a ‘.’, make ‘.*’ one of the patterns in GLOBIGNORE. The dotglob option is disabled when GLOBIGNORE is unset.


Up: Filename Expansion
3.5.8.1 Pattern Matching

Any character that appears in a pattern, other than the special pattern characters described below, matches itself. The nul character may not occur in a pattern. A backslash escapes the following character; the escaping backslash is discarded when matching. The special pattern characters must be quoted if they are to be matched literally.

The special pattern characters have the following meanings:

*
Matches any string, including the null string.
?
Matches any single character.
[...]
Matches any one of the enclosed characters. A pair of characters separated by a hyphen denotes a range expression; any character that sorts between those two characters, inclusive, using the current locale's collating sequence and character set, is matched. If the first character following the ‘[’ is a ‘!’ or a ‘^’ then any character not enclosed is matched. A ‘’ may be matched by including it as the first or last character in the set. A ‘]’ may be matched by including it as the first character in the set. The sorting order of characters in range expressions is determined by the current locale and the value of the LC_COLLATE shell variable, if set.

For example, in the default C locale, ‘[a-dx-z]’ is equivalent to ‘[abcdxyz]’. Many locales sort characters in dictionary order, and in these locales ‘[a-dx-z]’ is typically not equivalent to ‘[abcdxyz]’; it might be equivalent to ‘[aBbCcDdxXyYz]’, for example. To obtain the traditional interpretation of ranges in bracket expressions, you can force the use of the C locale by setting the LC_COLLATE or LC_ALL environment variable to the value ‘C’.

Within ‘[’ and ‘]’, character classes can be specified using the syntax [:class:], where class is one of the following classes defined in the posix standard:

          alnum   alpha   ascii   blank   cntrl   digit   graph   lower
          print   punct   space   upper   word    xdigit

A character class matches any character belonging to that class. The word character class matches letters, digits, and the character ‘_’.

Within ‘[’ and ‘]’, an equivalence class can be specified using the syntax [=c=], which matches all characters with the same collation weight (as defined by the current locale) as the character c.

Within ‘[’ and ‘]’, the syntax [.symbol.] matches the collating symbol symbol.

If the extglob shell option is enabled using the shopt builtin, several extended pattern matching operators are recognized. In the following description, a pattern-list is a list of one or more patterns separated by a ‘|’. Composite patterns may be formed using one or more of the following sub-patterns:

?(pattern-list)
Matches zero or one occurrence of the given patterns.
*(pattern-list)
Matches zero or more occurrences of the given patterns.
+(pattern-list)
Matches one or more occurrences of the given patterns.
@(pattern-list)
Matches one of the given patterns.
!(pattern-list)
Matches anything except one of the given patterns.


Previous: Filename Expansion, Up: Shell Expansions

3.5.9 Quote Removal

After the preceding expansions, all unquoted occurrences of the characters ‘\’, ‘'’, and ‘"’ that did not result from one of the above expansions are removed.


Next: , Previous: Shell Expansions, Up: Basic Shell Features

3.6 Redirections

Before a command is executed, its input and output may be redirected using a special notation interpreted by the shell. Redirection may also be used to open and close files for the current shell execution environment. The following redirection operators may precede or appear anywhere within a simple command or may follow a command. Redirections are processed in the order they appear, from left to right.

In the following descriptions, if the file descriptor number is omitted, and the first character of the redirection operator is ‘<’, the redirection refers to the standard input (file descriptor 0). If the first character of the redirection operator is ‘>’, the redirection refers to the standard output (file descriptor 1).

The word following the redirection operator in the following descriptions, unless otherwise noted, is subjected to brace expansion, tilde expansion, parameter expansion, command substitution, arithmetic expansion, quote removal, filename expansion, and word splitting. If it expands to more than one word, Bash reports an error.

Note that the order of redirections is significant. For example, the command

     ls > dirlist 2>&1

directs both standard output (file descriptor 1) and standard error (file descriptor 2) to the file dirlist, while the command

     ls 2>&1 > dirlist

directs only the standard output to file dirlist, because the standard error was duplicated as standard output before the standard output was redirected to dirlist.

Bash handles several filenames specially when they are used in redirections, as described in the following table:

/dev/fd/fd
If fd is a valid integer, file descriptor fd is duplicated.
/dev/stdin
File descriptor 0 is duplicated.
/dev/stdout
File descriptor 1 is duplicated.
/dev/stderr
File descriptor 2 is duplicated.
/dev/tcp/host/port
If host is a valid hostname or Internet address, and port is an integer port number or service name, Bash attempts to open a TCP connection to the corresponding socket.
/dev/udp/host/port
If host is a valid hostname or Internet address, and port is an integer port number or service name, Bash attempts to open a UDP connection to the corresponding socket.

A failure to open or create a file causes the redirection to fail.

Redirections using file descriptors greater than 9 should be used with care, as they may conflict with file descriptors the shell uses internally.

3.6.1 Redirecting Input

Redirection of input causes the file whose name results from the expansion of word to be opened for reading on file descriptor n, or the standard input (file descriptor 0) if n is not specified.

The general format for redirecting input is:

     [n]<word

3.6.2 Redirecting Output

Redirection of output causes the file whose name results from the expansion of word to be opened for writing on file descriptor n, or the standard output (file descriptor 1) if n is not specified. If the file does not exist it is created; if it does exist it is truncated to zero size.

The general format for redirecting output is:

     [n]>[|]word

If the redirection operator is ‘>’, and the noclobber option to the set builtin has been enabled, the redirection will fail if the file whose name results from the expansion of word exists and is a regular file. If the redirection operator is ‘>|’, or the redirection operator is ‘>’ and the noclobber option is not enabled, the redirection is attempted even if the file named by word exists.

3.6.3 Appending Redirected Output

Redirection of output in this fashion causes the file whose name results from the expansion of word to be opened for appending on file descriptor n, or the standard output (file descriptor 1) if n is not specified. If the file does not exist it is created.

The general format for appending output is:

     [n]>>word

3.6.4 Redirecting Standard Output and Standard Error

Bash allows both the standard output (file descriptor 1) and the standard error output (file descriptor 2) to be redirected to the file whose name is the expansion of word with this construct.

There are two formats for redirecting standard output and standard error:

     &>word

and

     >&word

Of the two forms, the first is preferred. This is semantically equivalent to

     >word 2>&1

3.6.5 Here Documents

This type of redirection instructs the shell to read input from the current source until a line containing only word (with no trailing blanks) is seen. All of the lines read up to that point are then used as the standard input for a command.

The format of here-documents is:

     <<[−]word
             here-document
     delimiter

No parameter expansion, command substitution, arithmetic expansion, or filename expansion is performed on word. If any characters in word are quoted, the delimiter is the result of quote removal on word, and the lines in the here-document are not expanded. If word is unquoted, all lines of the here-document are subjected to parameter expansion, command substitution, and arithmetic expansion. In the latter case, the character sequence \newline is ignored, and ‘\’ must be used to quote the characters ‘\’, ‘$’, and ‘`’.

If the redirection operator is ‘<<-’, then all leading tab characters are stripped from input lines and the line containing delimiter. This allows here-documents within shell scripts to be indented in a natural fashion.

3.6.6 Here Strings

A variant of here documents, the format is:

     <<< word

The word is expanded and supplied to the command on its standard input.

3.6.7 Duplicating File Descriptors

The redirection operator

     [n]<&word

is used to duplicate input file descriptors. If word expands to one or more digits, the file descriptor denoted by n is made to be a copy of that file descriptor. If the digits in word do not specify a file descriptor open for input, a redirection error occurs. If word evaluates to ‘-’, file descriptor n is closed. If n is not specified, the standard input (file descriptor 0) is used.

The operator

     [n]>&word

is used similarly to duplicate output file descriptors. If n is not specified, the standard output (file descriptor 1) is used. If the digits in word do not specify a file descriptor open for output, a redirection error occurs. As a special case, if n is omitted, and word does not expand to one or more digits, the standard output and standard error are redirected as described previously.

3.6.8 Moving File Descriptors

The redirection operator

     [n]<&digit-

moves the file descriptor digit to file descriptor n, or the standard input (file descriptor 0) if n is not specified. digit is closed after being duplicated to n.

Similarly, the redirection operator

     [n]>&digit-

moves the file descriptor digit to file descriptor n, or the standard output (file descriptor 1) if n is not specified.

3.6.9 Opening File Descriptors for Reading and Writing

The redirection operator

     [n]<>word

causes the file whose name is the expansion of word to be opened for both reading and writing on file descriptor n, or on file descriptor 0 if n is not specified. If the file does not exist, it is created.


Next: , Previous: Redirections, Up: Basic Shell Features

3.7 Executing Commands


Next: , Up: Executing Commands

3.7.1 Simple Command Expansion

When a simple command is executed, the shell performs the following expansions, assignments, and redirections, from left to right.

  1. The words that the parser has marked as variable assignments (those preceding the command name) and redirections are saved for later processing.
  2. The words that are not variable assignments or redirections are expanded (see Shell Expansions). If any words remain after expansion, the first word is taken to be the name of the command and the remaining words are the arguments.
  3. Redirections are performed as described above (see Redirections).
  4. The text after the ‘=’ in each variable assignment undergoes tilde expansion, parameter expansion, command substitution, arithmetic expansion, and quote removal before being assigned to the variable.

If no command name results, the variable assignments affect the current shell environment. Otherwise, the variables are added to the environment of the executed command and do not affect the current shell environment. If any of the assignments attempts to assign a value to a readonly variable, an error occurs, and the command exits with a non-zero status.

If no command name results, redirections are performed, but do not affect the current shell environment. A redirection error causes the command to exit with a non-zero status.

If there is a command name left after expansion, execution proceeds as described below. Otherwise, the command exits. If one of the expansions contained a command substitution, the exit status of the command is the exit status of the last command substitution performed. If there were no command substitutions, the command exits with a status of zero.


Next: , Previous: Simple Command Expansion, Up: Executing Commands

3.7.2 Command Search and Execution

After a command has been split into words, if it results in a simple command and an optional list of arguments, the following actions are taken.

  1. If the command name contains no slashes, the shell attempts to locate it. If there exists a shell function by that name, that function is invoked as described in Shell Functions.
  2. If the name does not match a function, the shell searches for it in the list of shell builtins. If a match is found, that builtin is invoked.
  3. If the name is neither a shell function nor a builtin, and contains no slashes, Bash searches each element of $PATH for a directory containing an executable file by that name. Bash uses a hash table to remember the full pathnames of executable files to avoid multiple PATH searches (see the description of hash in Bourne Shell Builtins). A full search of the directories in $PATH is performed only if the command is not found in the hash table. If the search is unsuccessful, the shell prints an error message and returns an exit status of 127.
  4. If the search is successful, or if the command name contains one or more slashes, the shell executes the named program in a separate execution environment. Argument 0 is set to the name given, and the remaining arguments to the command are set to the arguments supplied, if any.
  5. If this execution fails because the file is not in executable format, and the file is not a directory, it is assumed to be a shell script and the shell executes it as described in Shell Scripts.
  6. If the command was not begun asynchronously, the shell waits for the command to complete and collects its exit status.


Next: , Previous: Command Search and Execution, Up: Executing Commands

3.7.3 Command Execution Environment

The shell has an execution environment, which consists of the following:

When a simple command other than a builtin or shell function is to be executed, it is invoked in a separate execution environment that consists of the following. Unless otherwise noted, the values are inherited from the shell.

A command invoked in this separate environment cannot affect the shell's execution environment.

Command substitution, commands grouped with parentheses, and asynchronous commands are invoked in a subshell environment that is a duplicate of the shell environment, except that traps caught by the shell are reset to the values that the shell inherited from its parent at invocation. Builtin commands that are invoked as part of a pipeline are also executed in a subshell environment. Changes made to the subshell environment cannot affect the shell's execution environment.

If a command is followed by a ‘&’ and job control is not active, the default standard input for the command is the empty file /dev/null. Otherwise, the invoked command inherits the file descriptors of the calling shell as modified by redirections.


Next: , Previous: Command Execution Environment, Up: Executing Commands

3.7.4 Environment

When a program is invoked it is given an array of strings called the environment. This is a list of name-value pairs, of the form name=value.

Bash provides several ways to manipulate the environment. On invocation, the shell scans its own environment and creates a parameter for each name found, automatically marking it for export to child processes. Executed commands inherit the environment. The export and ‘declare -x’ commands allow parameters and functions to be added to and deleted from the environment. If the value of a parameter in the environment is modified, the new value becomes part of the environment, replacing the old. The environment inherited by any executed command consists of the shell's initial environment, whose values may be modified in the shell, less any pairs removed by the unset and ‘export -n’ commands, plus any additions via the export and ‘declare -x’ commands.

The environment for any simple command or function may be augmented temporarily by prefixing it with parameter assignments, as described in Shell Parameters. These assignment statements affect only the environment seen by that command.

If the -k option is set (see The Set Builtin), then all parameter assignments are placed in the environment for a command, not just those that precede the command name.

When Bash invokes an external command, the variable ‘$_’ is set to the full path name of the command and passed to that command in its environment.


Next: , Previous: Environment, Up: Executing Commands

3.7.5 Exit Status

For the shell's purposes, a command which exits with a zero exit status has succeeded. A non-zero exit status indicates failure. This seemingly counter-intuitive scheme is used so there is one well-defined way to indicate success and a variety of ways to indicate various failure modes. When a command terminates on a fatal signal whose number is N, Bash uses the value 128+N as the exit status.

If a command is not found, the child process created to execute it returns a status of 127. If a command is found but is not executable, the return status is 126.

If a command fails because of an error during expansion or redirection, the exit status is greater than zero.

The exit status is used by the Bash conditional commands (see Conditional Constructs) and some of the list constructs (see Lists).

All of the Bash builtins return an exit status of zero if they succeed and a non-zero status on failure, so they may be used by the conditional and list constructs. All builtins return an exit status of 2 to indicate incorrect usage.


Previous: Exit Status, Up: Executing Commands

3.7.6 Signals

When Bash is interactive, in the absence of any traps, it ignores SIGTERM (so that ‘kill 0’ does not kill an interactive shell), and SIGINT is caught and handled (so that the wait builtin is interruptible). When Bash receives a SIGINT, it breaks out of any executing loops. In all cases, Bash ignores SIGQUIT. If job control is in effect (see Job Control), Bash ignores SIGTTIN, SIGTTOU, and SIGTSTP.

Non-builtin commands started by Bash have signal handlers set to the values inherited by the shell from its parent. When job control is not in effect, asynchronous commands ignore SIGINT and SIGQUIT in addition to these inherited handlers. Commands run as a result of command substitution ignore the keyboard-generated job control signals SIGTTIN, SIGTTOU, and SIGTSTP.

The shell exits by default upon receipt of a SIGHUP. Before exiting, an interactive shell resends the SIGHUP to all jobs, running or stopped. Stopped jobs are sent SIGCONT to ensure that they receive the SIGHUP. To prevent the shell from sending the SIGHUP signal to a particular job, it should be removed from the jobs table with the disown builtin (see Job Control Builtins) or marked to not receive SIGHUP using disown -h.

If the huponexit shell option has been set with shopt (see Bash Builtins), Bash sends a SIGHUP to all jobs when an interactive login shell exits.

If Bash is waiting for a command to complete and receives a signal for which a trap has been set, the trap will not be executed until the command completes. When Bash is waiting for an asynchronous command via the wait builtin, the reception of a signal for which a trap has been set will cause the wait builtin to return immediately with an exit status greater than 128, immediately after which the trap is executed.


Previous: Executing Commands, Up: Basic Shell Features

3.8 Shell Scripts

A shell script is a text file containing shell commands. When such a file is used as the first non-option argument when invoking Bash, and neither the -c nor -s option is supplied (see Invoking Bash), Bash reads and executes commands from the file, then exits. This mode of operation creates a non-interactive shell. The shell first searches for the file in the current directory, and looks in the directories in $PATH if not found there.

When Bash runs a shell script, it sets the special parameter 0 to the name of the file, rather than the name of the shell, and the positional parameters are set to the remaining arguments, if any are given. If no additional arguments are supplied, the positional parameters are unset.

A shell script may be made executable by using the chmod command to turn on the execute bit. When Bash finds such a file while searching the $PATH for a command, it spawns a subshell to execute it. In other words, executing

     filename arguments

is equivalent to executing

     bash filename arguments

if filename is an executable shell script. This subshell reinitializes itself, so that the effect is as if a new shell had been invoked to interpret the script, with the exception that the locations of commands remembered by the parent (see the description of hash in Bourne Shell Builtins) are retained by the child.

Most versions of Unix make this a part of the operating system's command execution mechanism. If the first line of a script begins with the two characters ‘#!’, the remainder of the line specifies an interpreter for the program. Thus, you can specify Bash, awk, Perl, or some other interpreter and write the rest of the script file in that language.

The arguments to the interpreter consist of a single optional argument following the interpreter name on the first line of the script file, followed by the name of the script file, followed by the rest of the arguments. Bash will perform this action on operating systems that do not handle it themselves. Note that some older versions of Unix limit the interpreter name and argument to a maximum of 32 characters.

Bash scripts often begin with #! /bin/bash (assuming that Bash has been installed in /bin), since this ensures that Bash will be used to interpret the script, even if it is executed under another shell.


Next: , Previous: Basic Shell Features, Up: Top

4 Shell Builtin Commands

Builtin commands are contained within the shell itself. When the name of a builtin command is used as the first word of a simple command (see Simple Commands), the shell executes the command directly, without invoking another program. Builtin commands are necessary to implement functionality impossible or inconvenient to obtain with separate utilities.

This section briefly describes the builtins which Bash inherits from the Bourne Shell, as well as the builtin commands which are unique to or have been extended in Bash.

Several builtin commands are described in other chapters: builtin commands which provide the Bash interface to the job control facilities (see Job Control Builtins), the directory stack (see Directory Stack Builtins), the command history (see Bash History Builtins), and the programmable completion facilities (see Programmable Completion Builtins).

Many of the builtins have been extended by posix or Bash.

Unless otherwise noted, each builtin command documented as accepting options preceded by ‘-’ accepts ‘--’ to signify the end of the options. For example, the :, true, false, and test builtins do not accept options.


Next: , Up: Shell Builtin Commands

4.1 Bourne Shell Builtins

The following shell builtin commands are inherited from the Bourne Shell. These commands are implemented as specified by the posix standard.

: (a colon)
          : [arguments]

Do nothing beyond expanding arguments and performing redirections. The return status is zero.

. (a period)
          . filename [arguments]

Read and execute commands from the filename argument in the current shell context. If filename does not contain a slash, the PATH variable is used to find filename. When Bash is not in posix mode, the current directory is searched if filename is not found in $PATH. If any arguments are supplied, they become the positional parameters when filename is executed. Otherwise the positional parameters are unchanged. The return status is the exit status of the last command executed, or zero if no commands are executed. If filename is not found, or cannot be read, the return status is non-zero. This builtin is equivalent to source.

break
          break [n]

Exit from a for, while, until, or select loop. If n is supplied, the nth enclosing loop is exited. n must be greater than or equal to 1. The return status is zero unless n is not greater than or equal to 1.

cd
          cd [-L|-P] [directory]

Change the current working directory to directory. If directory is not given, the value of the HOME shell variable is used. If the shell variable CDPATH exists, it is used as a search path. If directory begins with a slash, CDPATH is not used.

The -P option means to not follow symbolic links; symbolic links are followed by default or with the -L option. If directory is ‘-’, it is equivalent to $OLDPWD.

If a non-empty directory name from CDPATH is used, or if ‘-’ is the first argument, and the directory change is successful, the absolute pathname of the new working directory is written to the standard output.

The return status is zero if the directory is successfully changed, non-zero otherwise.

continue
          continue [n]

Resume the next iteration of an enclosing for, while, until, or select loop. If n is supplied, the execution of the nth enclosing loop is resumed. n must be greater than or equal to 1. The return status is zero unless n is not greater than or equal to 1.

eval
          eval [arguments]

The arguments are concatenated together into a single command, which is then read and executed, and its exit status returned as the exit status of eval. If there are no arguments or only empty arguments, the return status is zero.

exec
          exec [-cl] [-a name] [command [arguments]]

If command is supplied, it replaces the shell without creating a new process. If the -l option is supplied, the shell places a dash at the beginning of the zeroth arg passed to command. This is what the login program does. The -c option causes command to be executed with an empty environment. If -a is supplied, the shell passes name as the zeroth argument to command. If no command is specified, redirections may be used to affect the current shell environment. If there are no redirection errors, the return status is zero; otherwise the return status is non-zero.

exit
          exit [n]

Exit the shell, returning a status of n to the shell's parent. If n is omitted, the exit status is that of the last command executed. Any trap on EXIT is executed before the shell terminates.

export
          export [-fn] [-p] [name[=value]]

Mark each name to be passed to child processes in the environment. If the -f option is supplied, the names refer to shell functions; otherwise the names refer to shell variables. The -n option means to no longer mark each name for export. If no names are supplied, or if the -p option is given, a list of exported names is displayed. The -p option displays output in a form that may be reused as input. If a variable name is followed by =value, the value of the variable is set to value.

The return status is zero unless an invalid option is supplied, one of the names is not a valid shell variable name, or -f is supplied with a name that is not a shell function.

getopts
          getopts optstring name [args]

getopts is used by shell scripts to parse positional parameters. optstring contains the option characters to be recognized; if a character is followed by a colon, the option is expected to have an argument, which should be separated from it by white space. The colon (‘:’) and question mark (‘?’) may not be used as option characters. Each time it is invoked, getopts places the next option in the shell variable name, initializing name if it does not exist, and the index of the next argument to be processed into the variable OPTIND. OPTIND is initialized to 1 each time the shell or a shell script is invoked. When an option requires an argument, getopts places that argument into the variable OPTARG. The shell does not reset OPTIND automatically; it must be manually reset between multiple calls to getopts within the same shell invocation if a new set of parameters is to be used.

When the end of options is encountered, getopts exits with a return value greater than zero. OPTIND is set to the index of the first non-option argument, and name is set to ‘?’.

getopts normally parses the positional parameters, but if more arguments are given in args, getopts parses those instead.

getopts can report errors in two ways. If the first character of optstring is a colon, silent error reporting is used. In normal operation diagnostic messages are printed when invalid options or missing option arguments are encountered. If the variable OPTERR is set to 0, no error messages will be displayed, even if the first character of optstring is not a colon.

If an invalid option is seen, getopts places ‘?’ into name and, if not silent, prints an error message and unsets OPTARG. If getopts is silent, the option character found is placed in OPTARG and no diagnostic message is printed.

If a required argument is not found, and getopts is not silent, a question mark (‘?’) is placed in name, OPTARG is unset, and a diagnostic message is printed. If getopts is silent, then a colon (‘:’) is placed in name and OPTARG is set to the option character found.

hash
          hash [-r] [-p filename] [-dt] [name]

Remember the full pathnames of commands specified as name arguments, so they need not be searched for on subsequent invocations. The commands are found by searching through the directories listed in $PATH. The -p option inhibits the path search, and filename is used as the location of name. The -r option causes the shell to forget all remembered locations. The -d option causes the shell to forget the remembered location of each name. If the -t option is supplied, the full pathname to which each name corresponds is printed. If multiple name arguments are supplied with -t the name is printed before the hashed full pathname. The -l option causes output to be displayed in a format that may be reused as input. If no arguments are given, or if only -l is supplied, information about remembered commands is printed. The return status is zero unless a name is not found or an invalid option is supplied.

pwd
          pwd [-LP]

Print the absolute pathname of the current working directory. If the -P option is supplied, the pathname printed will not contain symbolic links. If the -L option is supplied, the pathname printed may contain symbolic links. The return status is zero unless an error is encountered while determining the name of the current directory or an invalid option is supplied.

readonly
          readonly [-apf] [name[=value]] ...

Mark each name as readonly. The values of these names may not be changed by subsequent assignment. If the -f option is supplied, each name refers to a shell function. The -a option means each name refers to an array variable. If no name arguments are given, or if the -p option is supplied, a list of all readonly names is printed. The -p option causes output to be displayed in a format that may be reused as input. If a variable name is followed by =value, the value of the variable is set to value. The return status is zero unless an invalid option is supplied, one of the name arguments is not a valid shell variable or function name, or the -f option is supplied with a name that is not a shell function.

return
          return [n]

Cause a shell function to exit with the return value n. If n is not supplied, the return value is the exit status of the last command executed in the function. This may also be used to terminate execution of a script being executed with the . (or source) builtin, returning either n or the exit status of the last command executed within the script as the exit status of the script. Any command associated with the RETURN trap is executed before execution resumes after the function or script. The return status is non-zero if return is used outside a function and not during the execution of a script by . or source.

shift
          shift [n]

Shift the positional parameters to the left by n. The positional parameters from n+1 ... $# are renamed to $1 ... $#-n+1. Parameters represented by the numbers $# to n+1 are unset. n must be a non-negative number less than or equal to $#. If n is zero or greater than $#, the positional parameters are not changed. If n is not supplied, it is assumed to be 1. The return status is zero unless n is greater than $# or less than zero, non-zero otherwise.

test
[
Evaluate a conditional expression expr. Each operator and operand must be a separate argument. Expressions are composed of the primaries described below in Bash Conditional Expressions. test does not accept any options, nor does it accept and ignore an argument of -- as signifying the end of options.

When the [ form is used, the last argument to the command must be a ].

Expressions may be combined using the following operators, listed in decreasing order of precedence.

! expr
True if expr is false.
( expr )
Returns the value of expr. This may be used to override the normal precedence of operators.
expr1 -a expr2
True if both expr1 and expr2 are true.
expr1 -o expr2
True if either expr1 or expr2 is true.

The test and [ builtins evaluate conditional expressions using a set of rules based on the number of arguments.

0 arguments
The expression is false.
1 argument
The expression is true if and only if the argument is not null.
2 arguments
If the first argument is ‘!’, the expression is true if and only if the second argument is null. If the first argument is one of the unary conditional operators (see Bash Conditional Expressions), the expression is true if the unary test is true. If the first argument is not a valid unary operator, the expression is false.
3 arguments
If the second argument is one of the binary conditional operators (see Bash Conditional Expressions), the result of the expression is the result of the binary test using the first and third arguments as operands. If the first argument is ‘!’, the value is the negation of the two-argument test using the second and third arguments. If the first argument is exactly ‘(’ and the third argument is exactly ‘)’, the result is the one-argument test of the second argument. Otherwise, the expression is false. The ‘-a’ and ‘-o’ operators are considered binary operators in this case.
4 arguments
If the first argument is ‘!’, the result is the negation of the three-argument expression composed of the remaining arguments. Otherwise, the expression is parsed and evaluated according to precedence using the rules listed above.
5 or more arguments
The expression is parsed and evaluated according to precedence using the rules listed above.

times
          times

Print out the user and system times used by the shell and its children. The return status is zero.

trap
          trap [-lp] [arg] [sigspec ...]

The commands in arg are to be read and executed when the shell receives signal sigspec. If arg is absent (and there is a single sigspec) or equal to ‘-’, each specified signal's disposition is reset to the value it had when the shell was started. If arg is the null string, then the signal specified by each sigspec is ignored by the shell and commands it invokes. If arg is not present and -p has been supplied, the shell displays the trap commands associated with each sigspec. If no arguments are supplied, or only -p is given, trap prints the list of commands associated with each signal number in a form that may be reused as shell input. The -l option causes the shell to print a list of signal names and their corresponding numbers. Each sigspec is either a signal name or a signal number. Signal names are case insensitive and the SIG prefix is optional. If a sigspec is 0 or EXIT, arg is executed when the shell exits. If a sigspec is DEBUG, the command arg is executed before every simple command, for command, case command, select command, every arithmetic for command, and before the first command executes in a shell function. Refer to the description of the extglob option to the shopt builtin (see Bash Builtins) for details of its effect on the DEBUG trap. If a sigspec is ERR, the command arg is executed whenever a simple command has a non-zero exit status, subject to the following conditions. The ERR trap is not executed if the failed command is part of the command list immediately following an until or while keyword, part of the test in an if statement, part of a && or || list, or if the command's return status is being inverted using !. These are the same conditions obeyed by the errexit option. If a sigspec is RETURN, the command arg is executed each time a shell function or a script executed with the . or source builtins finishes executing.

Signals ignored upon entry to the shell cannot be trapped or reset. Trapped signals that are not being ignored are reset to their original values in a child process when it is created.

The return status is zero unless a sigspec does not specify a valid signal.

umask
          umask [-p] [-S] [mode]

Set the shell process's file creation mask to mode. If mode begins with a digit, it is interpreted as an octal number; if not, it is interpreted as a symbolic mode mask similar to that accepted by the chmod command. If mode is omitted, the current value of the mask is printed. If the -S option is supplied without a mode argument, the mask is printed in a symbolic format. If the -p option is supplied, and mode is omitted, the output is in a form that may be reused as input. The return status is zero if the mode is successfully changed or if no mode argument is supplied, and non-zero otherwise.

Note that when the mode is interpreted as an octal number, each number of the umask is subtracted from 7. Thus, a umask of 022 results in permissions of 755.

unset
          unset [-fv] [name]

Each variable or function name is removed. If no options are supplied, or the -v option is given, each name refers to a shell variable. If the -f option is given, the names refer to shell functions, and the function definition is removed. Readonly variables and functions may not be unset. The return status is zero unless a name is readonly.


Next: , Previous: Bourne Shell Builtins, Up: Shell Builtin Commands

4.2 Bash Builtin Commands

This section describes builtin commands which are unique to or have been extended in Bash. Some of these commands are specified in the posix standard.

alias
          alias [-p] [name[=value] ...]

Without arguments or with the -p option, alias prints the list of aliases on the standard output in a form that allows them to be reused as input. If arguments are supplied, an alias is defined for each name whose value is given. If no value is given, the name and value of the alias is printed. Aliases are described in Aliases.

bind
          bind [-m keymap] [-lpsvPSV]
          bind [-m keymap] [-q function] [-u function] [-r keyseq]
          bind [-m keymap] -f filename
          bind [-m keymap] -x keyseq:shell-command
          bind [-m keymap] keyseq:function-name
          bind readline-command

Display current Readline (see Command Line Editing) key and function bindings, bind a key sequence to a Readline function or macro, or set a Readline variable. Each non-option argument is a command as it would appear in a a Readline initialization file (see Readline Init File), but each binding or command must be passed as a separate argument; e.g., ‘"\C-x\C-r":re-read-init-file’. Options, if supplied, have the following meanings:

-m keymap
Use keymap as the keymap to be affected by the subsequent bindings. Acceptable keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. vi is equivalent to vi-command; emacs is equivalent to emacs-standard.
-l
List the names of all Readline functions.
-p
Display Readline function names and bindings in such a way that they can be used as input or in a Readline initialization file.
-P
List current Readline function names and bindings.
-v
Display Readline variable names and values in such a way that they can be used as input or in a Readline initialization file.
-V
List current Readline variable names and values.
-s
Display Readline key sequences bound to macros and the strings they output in such a way that they can be used as input or in a Readline initialization file.
-S
Display Readline key sequences bound to macros and the strings they output.
-f filename
Read key bindings from filename.
-q function
Query about which keys invoke the named function.
-u function
Unbind all keys bound to the named function.
-r keyseq
Remove any current binding for keyseq.
-x keyseq:shell-command
Cause shell-command to be executed whenever keyseq is entered.

The return status is zero unless an invalid option is supplied or an error occurs.

builtin
          builtin [shell-builtin [args]]

Run a shell builtin, passing it args, and return its exit status. This is useful when defining a shell function with the same name as a shell builtin, retaining the functionality of the builtin within the function. The return status is non-zero if shell-builtin is not a shell builtin command.

caller
          caller [expr]

Returns the context of any active subroutine call (a shell function or a script executed with the . or source builtins).

Without expr, caller displays the line number and source filename of the current subroutine call. If a non-negative integer is supplied as expr, caller displays the line number, subroutine name, and source file corresponding to that position in the current execution call stack. This extra information may be used, for example, to print a stack trace. The current frame is frame 0.

The return value is 0 unless the shell is not executing a subroutine call or expr does not correspond to a valid position in the call stack.

command
          command [-pVv] command [arguments ...]

Runs command with arguments ignoring any shell function named command. Only shell builtin commands or commands found by searching the PATH are executed. If there is a shell function named ls, running ‘command ls’ within the function will execute the external command ls instead of calling the function recursively. The -p option means to use a default value for PATH that is guaranteed to find all of the standard utilities. The return status in this case is 127 if command cannot be found or an error occurred, and the exit status of command otherwise.

If either the -V or -v option is supplied, a description of command is printed. The -v option causes a single word indicating the command or file name used to invoke command to be displayed; the -V option produces a more verbose description. In this case, the return status is zero if command is found, and non-zero if not.

declare
          declare [-afFirtx] [-p] [name[=value] ...]

Declare variables and give them attributes. If no names are given, then display the values of variables instead.

The -p option will display the attributes and values of each name. When -p is used, additional options are ignored. The -F option inhibits the display of function definitions; only the function name and attributes are printed. If the extdebug shell option is enabled using shopt (see Bash Builtins), the source file name and line number where the function is defined are displayed as well. -F implies -f. The following options can be used to restrict output to variables with the specified attributes or to give variables attributes:

-a
Each name is an array variable (see Arrays).
-f
Use function names only.
-i
The variable is to be treated as an integer; arithmetic evaluation (see Shell Arithmetic) is performed when the variable is assigned a value.
-r
Make names readonly. These names cannot then be assigned values by subsequent assignment statements or unset.
-t
Give each name the trace attribute. Traced functions inherit the DEBUG and RETURN traps from the calling shell. The trace attribute has no special meaning for variables.
-x
Mark each name for export to subsequent commands via the environment.

Using ‘+’ instead of ‘-’ turns off the attribute instead. When used in a function, declare makes each name local, as with the local command. If a variable name is followed by =value, the value of the variable is set to value.

The return status is zero unless an invalid option is encountered, an attempt is made to define a function using ‘-f foo=bar’, an attempt is made to assign a value to a readonly variable, an attempt is made to assign a value to an array variable without using the compound assignment syntax (see Arrays), one of the names is not a valid shell variable name, an attempt is made to turn off readonly status for a readonly variable, an attempt is made to turn off array status for an array variable, or an attempt is made to display a non-existent function with -f.

echo
          echo [-neE] [arg ...]

Output the args, separated by spaces, terminated with a newline. The return status is always 0. If -n is specified, the trailing newline is suppressed. If the -e option is given, interpretation of the following backslash-escaped characters is enabled. The -E option disables the interpretation of these escape characters, even on systems where they are interpreted by default. The xpg_echo shell option may be used to dynamically determine whether or not echo expands these escape characters by default. echo does not interpret -- to mean the end of options.

echo interprets the following escape sequences:

\a
alert (bell)
\b
backspace
\c
suppress trailing newline
\e
escape
\f
form feed
\n
new line
\r
carriage return
\t
horizontal tab
\v
vertical tab
\\
backslash
\0nnn
the eight-bit character whose value is the octal value nnn (zero to three octal digits)
\xHH
the eight-bit character whose value is the hexadecimal value HH (one or two hex digits)

enable
          enable [-n] [-p] [-f filename] [-ads] [name ...]

Enable and disable builtin shell commands. Disabling a builtin allows a disk command which has the same name as a shell builtin to be executed without specifying a full pathname, even though the shell normally searches for builtins before disk commands. If -n is used, the names become disabled. Otherwise names are enabled. For example, to use the test binary found via $PATH instead of the shell builtin version, type ‘enable -n test’.

If the -p option is supplied, or no name arguments appear, a list of shell builtins is printed. With no other arguments, the list consists of all enabled shell builtins. The -a option means to list each builtin with an indication of whether or not it is enabled.

The -f option means to load the new builtin command name from shared object filename, on systems that support dynamic loading. The -d option will delete a builtin loaded with -f.

If there are no options, a list of the shell builtins is displayed. The -s option restricts enable to the posix special builtins. If -s is used with -f, the new builtin becomes a special builtin (see Special Builtins).

The return status is zero unless a name is not a shell builtin or there is an error loading a new builtin from a shared object.

help
          help [-s] [pattern]

Display helpful information about builtin commands. If pattern is specified, help gives detailed help on all commands matching pattern, otherwise a list of the builtins is printed. The -s option restricts the information displayed to a short usage synopsis. The return status is zero unless no command matches pattern.

let
          let expression [expression]

The let builtin allows arithmetic to be performed on shell variables. Each expression is evaluated according to the rules given below in Shell Arithmetic. If the last expression evaluates to 0, let returns 1; otherwise 0 is returned.

local
          local [option] name[=value] ...

For each argument, a local variable named name is created, and assigned value. The option can be any of the options accepted by declare. local can only be used within a function; it makes the variable name have a visible scope restricted to that function and its children. The return status is zero unless local is used outside a function, an invalid name is supplied, or name is a readonly variable.

logout
          logout [n]

Exit a login shell, returning a status of n to the shell's parent.

printf
          printf [-v var] format [arguments]

Write the formatted arguments to the standard output under the control of the format. The format is a character string which contains three types of objects: plain characters, which are simply copied to standard output, character escape sequences, which are converted and copied to the standard output, and format specifications, each of which causes printing of the next successive argument. In addition to the standard printf(1) formats, ‘%b’ causes printf to expand backslash escape sequences in the corresponding argument, (except that ‘\c’ terminates output, backslashes in ‘\'’, ‘\"’, and ‘\?’ are not removed, and octal escapes beginning with ‘\0’ may contain up to four digits), and ‘%q’ causes printf to output the corresponding argument in a format that can be reused as shell input.

The -v option causes the output to be assigned to the variable var rather than being printed to the standard output.

The format is reused as necessary to consume all of the arguments. If the format requires more arguments than are supplied, the extra format specifications behave as if a zero value or null string, as appropriate, had been supplied. The return value is zero on success, non-zero on failure.

read
          read [-ers] [-a aname] [-d delim] [-n nchars] [-p prompt] [-t timeout] [-u fd] [name ...]

One line is read from the standard input, or from the file descriptor fd supplied as an argument to the -u option, and the first word is assigned to the first name, the second word to the second name, and so on, with leftover words and their intervening separators assigned to the last name. If there are fewer words read from the input stream than names, the remaining names are assigned empty values. The characters in the value of the IFS variable are used to split the line into words. The backslash character ‘\’ may be used to remove any special meaning for the next character read and for line continuation. If no names are supplied, the line read is assigned to the variable REPLY. The return code is zero, unless end-of-file is encountered, read times out, or an invalid file descriptor is supplied as the argument to -u. Options, if supplied, have the following meanings:

-a aname
The words are assigned to sequential indices of the array variable aname, starting at 0. All elements are removed from aname before the assignment. Other name arguments are ignored.
-d delim
The first character of delim is used to terminate the input line, rather than newline.
-e
Readline (see Command Line Editing) is used to obtain the line.
-n nchars
read returns after reading nchars characters rather than waiting for a complete line of input.
-p prompt
Display prompt, without a trailing newline, before attempting to read any input. The prompt is displayed only if input is coming from a terminal.
-r
If this option is given, backslash does not act as an escape character. The backslash is considered to be part of the line. In particular, a backslash-newline pair may not be used as a line continuation.
-s
Silent mode. If input is coming from a terminal, characters are not echoed.
-t timeout
Cause read to time out and return failure if a complete line of input is not read within timeout seconds. This option has no effect if read is not reading input from the terminal or a pipe.
-u fd
Read input from file descriptor fd.

shopt
          shopt [-pqsu] [-o] [optname ...]

Toggle the values of variables controlling optional shell behavior. With no options, or with the -p option, a list of all settable options is displayed, with an indication of whether or not each is set. The -p option causes output to be displayed in a form that may be reused as input. Other options have the following meanings:

-s
Enable (set) each optname.
-u
Disable (unset) each optname.
-q
Suppresses normal output; the return status indicates whether the optname is set or unset. If multiple optname arguments are given with -q, the return status is zero if all optnames are enabled; non-zero otherwise.
-o
Restricts the values of optname to be those defined for the -o option to the set builtin (see The Set Builtin).

If either -s or -u is used with no optname arguments, the display is limited to those options which are set or unset, respectively.

Unless otherwise noted, the shopt options are disabled (off) by default.

The return status when listing options is zero if all optnames are enabled, non-zero otherwise. When setting or unsetting options, the return status is zero unless an optname is not a valid shell option.

The list of shopt options is:

cdable_vars
If this is set, an argument to the cd builtin command that is not a directory is assumed to be the name of a variable whose value is the directory to change to.
cdspell
If set, minor errors in the spelling of a directory component in a cd command will be corrected. The errors checked for are transposed characters, a missing character, and a character too many. If a correction is found, the corrected path is printed, and the command proceeds. This option is only used by interactive shells.
checkhash
If this is set, Bash checks that a command found in the hash table exists before trying to execute it. If a hashed command no longer exists, a normal path search is performed.
checkwinsize
If set, Bash checks the window size after each command and, if necessary, updates the values of LINES and COLUMNS.
cmdhist
If set, Bash attempts to save all lines of a multiple-line command in the same history entry. This allows easy re-editing of multi-line commands.
dotglob
If set, Bash includes filenames beginning with a `.' in the results of filename expansion.
execfail
If this is set, a non-interactive shell will not exit if it cannot execute the file specified as an argument to the exec builtin command. An interactive shell does not exit if exec fails.
expand_aliases
If set, aliases are expanded as described below under Aliases, Aliases. This option is enabled by default for interactive shells.
extdebug
If set, behavior intended for use by debuggers is enabled:
  1. The -F option to the declare builtin (see Bash Builtins) displays the source file name and line number corresponding to each function name supplied as an argument.
  2. If the command run by the DEBUG trap returns a non-zero value, the next command is skipped and not executed.
  3. If the command run by the DEBUG trap returns a value of 2, and the shell is executing in a subroutine (a shell function or a shell script executed by the . or source builtins), a call to return is simulated.
  4. BASH_ARGC and BASH_ARGV are updated as described in their descriptions (see Bash Variables).
  5. Function tracing is enabled: command substitution, shell functions, and subshells invoked with ( command ) inherit the DEBUG and RETURN traps.
  6. Error tracing is enabled: command substitution, shell functions, and subshells invoked with ( command ) inherit the ERROR trap.

extglob
If set, the extended pattern matching features described above (see Pattern Matching) are enabled.
extquote
If set, $'string' and $"string" quoting is performed within ${parameter} expansions enclosed in double quotes. This option is enabled by default.
failglob
If set, patterns which fail to match filenames during pathname expansion result in an expansion error.
force_fignore
If set, the suffixes specified by the FIGNORE shell variable cause words to be ignored when performing word completion even if the ignored words are the only possible completions. See Bash Variables, for a description of FIGNORE. This option is enabled by default.
gnu_errfmt
If set, shell error messages are written in the standard gnu error message format.
histappend
If set, the history list is appended to the file named by the value of the HISTFILE variable when the shell exits, rather than overwriting the file.
histreedit
If set, and Readline is being used, a user is given the opportunity to re-edit a failed history substitution.
histverify
If set, and Readline is being used, the results of history substitution are not immediately passed to the shell parser. Instead, the resulting line is loaded into the Readline editing buffer, allowing further modification.
hostcomplete
If set, and Readline is being used, Bash will attempt to perform hostname completion when a word containing a ‘@’ is being completed (see Commands For Completion). This option is enabled by default.
huponexit
If set, Bash will send SIGHUP to all jobs when an interactive login shell exits (see Signals).
interactive_comments
Allow a word beginning with ‘#’ to cause that word and all remaining characters on that line to be ignored in an interactive shell. This option is enabled by default.
lithist
If enabled, and the cmdhist option is enabled, multi-line commands are saved to the history with embedded newlines rather than using semicolon separators where possible.
login_shell
The shell sets this option if it is started as a login shell (see Invoking Bash). The value may not be changed.
mailwarn
If set, and a file that Bash is checking for mail has been accessed since the last time it was checked, the message "The mail in mailfile has been read" is displayed.
no_empty_cmd_completion
If set, and Readline is being used, Bash will not attempt to search the PATH for possible completions when completion is attempted on an empty line.
nocaseglob
If set, Bash matches filenames in a case-insensitive fashion when performing filename expansion.
nocasematch
If set, Bash matches patterns in a case-insensitive fashion when performing matching while executing case or [[ conditional commands.
nullglob
If set, Bash allows filename patterns which match no files to expand to a null string, rather than themselves.
progcomp
If set, the programmable completion facilities (see Programmable Completion) are enabled. This option is enabled by default.
promptvars
If set, prompt strings undergo parameter expansion, command substitution, arithmetic expansion, and quote removal after being expanded as described below (see Printing a Prompt). This option is enabled by default.
restricted_shell
The shell sets this option if it is started in restricted mode (see The Restricted Shell). The value may not be changed. This is not reset when the startup files are executed, allowing the startup files to discover whether or not a shell is restricted.
shift_verbose
If this is set, the shift builtin prints an error message when the shift count exceeds the number of positional parameters.
sourcepath
If set, the source builtin uses the value of PATH to find the directory containing the file supplied as an argument. This option is enabled by default.
xpg_echo
If set, the echo builtin expands backslash-escape sequences by default.

The return status when listing options is zero if all optnames are enabled, non-zero otherwise. When setting or unsetting options, the return status is zero unless an optname is not a valid shell option.

source
          source filename

A synonym for . (see Bourne Shell Builtins).

type
          type [-afptP] [name ...]

For each name, indicate how it would be interpreted if used as a command name.

If the -t option is used, type prints a single word which is one of ‘alias’, ‘function’, ‘builtin’, ‘file’ or ‘keyword’, if name is an alias, shell function, shell builtin, disk file, or shell reserved word, respectively. If the name is not found, then nothing is printed, and type returns a failure status.

If the -p option is used, type either returns the name of the disk file that would be executed, or nothing if -t would not return ‘file’.

The -P option forces a path search for each name, even if -t would not return ‘file’.

If a command is hashed, -p and -P print the hashed value, not necessarily the file that appears first in $PATH.

If the -a option is used, type returns all of the places that contain an executable named file. This includes aliases and functions, if and only if the -p option is not also used.

If the -f option is used, type does not attempt to find shell functions, as with the command builtin.

The return status is zero if any of the names are found, non-zero if none are found.

typeset
          typeset [-afFrxi] [-p] [name[=value] ...]

The typeset command is supplied for compatibility with the Korn shell; however, it has been deprecated in favor of the declare builtin command.

ulimit
          ulimit [-acdefilmnpqrstuvxSH] [limit]

ulimit provides control over the resources available to processes started by the shell, on systems that allow such control. If an option is given, it is interpreted as follows:

-S
Change and report the soft limit associated with a resource.
-H
Change and report the hard limit associated with a resource.
-a
All current limits are reported.
-c
The maximum size of core files created.
-d
The maximum size of a process's data segment.
-e
The maximum scheduling priority ("nice").
-f
The maximum size of files written by the shell and its children.
-i
The maximum number of pending signals.
-l
The maximum size that may be locked into memory.
-m
The maximum resident set size.
-n
The maximum number of open file descriptors.
-p
The pipe buffer size.
-q
The maximum number of bytes in POSIX message queues.
-r
The maximum real-time scheduling priority.
-s
The maximum stack size.
-t
The maximum amount of cpu time in seconds.
-u
The maximum number of processes available to a single user.
-v
The maximum amount of virtual memory available to the process.
-x
The maximum number of file locks.

If limit is given, it is the new value of the specified resource; the special limit values hard, soft, and unlimited stand for the current hard limit, the current soft limit, and no limit, respectively. Otherwise, the current value of the soft limit for the specified resource is printed, unless the -H option is supplied. When setting new limits, if neither -H nor -S is supplied, both the hard and soft limits are set. If no option is given, then -f is assumed. Values are in 1024-byte increments, except for -t, which is in seconds, -p, which is in units of 512-byte blocks, and -n and -u, which are unscaled values.

The return status is zero unless an invalid option or argument is supplied, or an error occurs while setting a new limit.

unalias
          unalias [-a] [name ... ]

Remove each name from the list of aliases. If -a is supplied, all aliases are removed. Aliases are described in Aliases.


Next: , Previous: Bash Builtins, Up: Shell Builtin Commands

4.3 The Set Builtin

This builtin is so complicated that it deserves its own section.

set
          set [--abefhkmnptuvxBCHP] [-o option] [argument ...]

If no options or arguments are supplied, set displays the names and values of all shell variables and functions, sorted according to the current locale, in a format that may be reused as input for setting or resetting the currently-set variables. Read-only variables cannot be reset. In posix mode, only shell variables are listed.

When options are supplied, they set or unset shell attributes. Options, if specified, have the following meanings:

-a
Mark variables and function which are modified or created for export to the environment of subsequent commands.
-b
Cause the status of terminated background jobs to be reported immediately, rather than before printing the next primary prompt.
-e
Exit immediately if a simple command (see Simple Commands) exits with a non-zero status, unless the command that fails is part of the command list immediately following a while or until keyword, part of the test in an if statement, part of a && or || list, or if the command's return status is being inverted using !. A trap on ERR, if set, is executed before the shell exits.
-f
Disable file name generation (globbing).
-h
Locate and remember (hash) commands as they are looked up for execution. This option is enabled by default.
-k
All arguments in the form of assignment statements are placed in the environment for a command, not just those that precede the command name.
-m
Job control is enabled (see Job Control).
-n
Read commands but do not execute them; this may be used to check a script for syntax errors. This option is ignored by interactive shells.
-o option-name
Set the option corresponding to option-name:
allexport
Same as -a.
braceexpand
Same as -B.
emacs
Use an emacs-style line editing interface (see Command Line Editing).
errexit
Same as -e.
errtrace
Same as -E.
functrace
Same as -T.
hashall
Same as -h.
histexpand
Same as -H.
history
Enable command history, as described in Bash History Facilities. This option is on by default in interactive shells.
ignoreeof
An interactive shell will not exit upon reading EOF.
keyword
Same as -k.
monitor
Same as -m.
noclobber
Same as -C.
noexec
Same as -n.
noglob
Same as -f.
nolog
Currently ignored.
notify
Same as -b.
nounset
Same as -u.
onecmd
Same as -t.
physical
Same as -P.
pipefail
If set, the return value of a pipeline is the value of the last (rightmost) command to exit with a non-zero status, or zero if all commands in the pipeline exit successfully. This option is disabled by default.
posix
Change the behavior of Bash where the default operation differs from the posix standard to match the standard (see Bash POSIX Mode). This is intended to make Bash behave as a strict superset of that standard.
privileged
Same as -p.
verbose
Same as -v.
vi
Use a vi-style line editing interface.
xtrace
Same as -x.

-p
Turn on privileged mode. In this mode, the $BASH_ENV and $ENV files are not processed, shell functions are not inherited from the environment, and the SHELLOPTS variable, if it appears in the environment, is ignored. If the shell is started with the effective user (group) id not equal to the real user (group) id, and the -p option is not supplied, these actions are taken and the effective user id is set to the real user id. If the -p option is supplied at startup, the effective user id is not reset. Turning this option off causes the effective user and group ids to be set to the real user and group ids.
-t
Exit after reading and executing one command.
-u
Treat unset variables as an error when performing parameter expansion. An error message will be written to the standard error, and a non-interactive shell will exit.
-v
Print shell input lines as they are read.
-x
Print a trace of simple commands, for commands, case commands, select commands, and arithmetic for commands and their arguments or associated word lists after they are expanded and before they are executed. The value of the PS4 variable is expanded and the resultant value is printed before the command and its expanded arguments.
-B
The shell will perform brace expansion (see Brace Expansion). This option is on by default.
-C
Prevent output redirection using ‘>’, ‘>&’, and ‘<>’ from overwriting existing files.
-E
If set, any trap on ERR is inherited by shell functions, command substitutions, and commands executed in a subshell environment. The ERR trap is normally not inherited in such cases.
-H
Enable ‘!’ style history substitution (see History Interaction). This option is on by default for interactive shells.
-P
If set, do not follow symbolic links when performing commands such as cd which change the current directory. The physical directory is used instead. By default, Bash follows the logical chain of directories when performing commands which change the current directory.

For example, if /usr/sys is a symbolic link to /usr/local/sys then:

               $ cd /usr/sys; echo $PWD
               /usr/sys
               $ cd ..; pwd
               /usr

If set -P is on, then:

               $ cd /usr/sys; echo $PWD
               /usr/local/sys
               $ cd ..; pwd
               /usr/local

-T
If set, any trap on DEBUG and RETURN are inherited by shell functions, command substitutions, and commands executed in a subshell environment. The DEBUG and RETURN traps are normally not inherited in such cases.
--
If no arguments follow this option, then the positional parameters are unset. Otherwise, the positional parameters are set to the arguments, even if some of them begin with a ‘-’.
-
Signal the end of options, cause all remaining arguments to be assigned to the positional parameters. The -x and -v options are turned off. If there are no arguments, the positional parameters remain unchanged.

Using ‘+’ rather than ‘-’ causes these options to be turned off. The options can also be used upon invocation of the shell. The current set of options may be found in $-.

The remaining N arguments are positional parameters and are assigned, in order, to $1, $2, ... $N. The special parameter # is set to N.

The return status is always zero unless an invalid option is supplied.


Previous: The Set Builtin, Up: Shell Builtin Commands

4.4 Special Builtins

For historical reasons, the posix standard has classified several builtin commands as special. When Bash is executing in posix mode, the special builtins differ from other builtin commands in three respects:

  1. Special builtins are found before shell functions during command lookup.
  2. If a special builtin returns an error status, a non-interactive shell exits.
  3. Assignment statements preceding the command stay in effect in the shell environment after the command completes.

When Bash is not executing in posix mode, these builtins behave no differently than the rest of the Bash builtin commands. The Bash posix mode is described in Bash POSIX Mode.

These are the posix special builtins:

     break : . continue eval exec exit export readonly return set
     shift trap unset


Next: , Previous: Shell Builtin Commands, Up: Top

5 Shell Variables

This chapter describes the shell variables that Bash uses. Bash automatically assigns default values to a number of variables.


Next: , Up: Shell Variables

5.1 Bourne Shell Variables

Bash uses certain shell variables in the same way as the Bourne shell. In some cases, Bash assigns a default value to the variable.

CDPATH
A colon-separated list of directories used as a search path for the cd builtin command.
HOME
The current user's home directory; the default for the cd builtin command. The value of this variable is also used by tilde expansion (see Tilde Expansion).
IFS
A list of characters that separate fields; used when the shell splits words as part of expansion.
MAIL
If this parameter is set to a filename and the MAILPATH variable is not set, Bash informs the user of the arrival of mail in the specified file.
MAILPATH
A colon-separated list of filenames which the shell periodically checks for new mail. Each list entry can specify the message that is printed when new mail arrives in the mail file by separating the file name from the message with a ‘?’. When used in the text of the message, $_ expands to the name of the current mail file.
OPTARG
The value of the last option argument processed by the getopts builtin.
OPTIND
The index of the last option argument processed by the getopts builtin.
PATH
A colon-separated list of directories in which the shell looks for commands. A zero-length (null) directory name in the value of PATH indicates the current directory. A null directory name may appear as two adjacent colons, or as an initial or trailing colon.
PS1
The primary prompt string. The default value is ‘\s-\v\$ ’. See Printing a Prompt, for the complete list of escape sequences that are expanded before PS1 is displayed.
PS2
The secondary prompt string. The default value is ‘> ’.


Previous: Bourne Shell Variables, Up: Shell Variables

5.2 Bash Variables

These variables are set or used by Bash, but other shells do not normally treat them specially.

A few variables used by Bash are described in different chapters: variables for controlling the job control facilities (see Job Control Variables).

BASH
The full pathname used to execute the current instance of Bash.
BASH_ARGC
An array variable whose values are the number of parameters in each frame of the current bash execution call stack. The number of parameters to the current subroutine (shell function or script executed with . or source) is at the top of the stack. When a subroutine is executed, the number of parameters passed is pushed onto BASH_ARGC. The shell sets BASH_ARGC only when in extended debugging mode (see Bash Builtins for a description of the extdebug option to the shopt builtin).
BASH_ARGV
An array variable containing all of the parameters in the current bash execution call stack. The final parameter of the last subroutine call is at the top of the stack; the first parameter of the initial call is at the bottom. When a subroutine is executed, the parameters supplied are pushed onto BASH_ARGV. The shell sets BASH_ARGV only when in extended debugging mode (see Bash Builtins for a description of the extdebug option to the shopt builtin).
BASH_COMMAND
The command currently being executed or about to be executed, unless the shell is executing a command as the result of a trap, in which case it is the command executing at the time of the trap.
BASH_ENV
If this variable is set when Bash is invoked to execute a shell script, its value is expanded and used as the name of a startup file to read before executing the script. See Bash Startup Files.
BASH_EXECUTION_STRING
The command argument to the -c invocation option.
BASH_LINENO
An array variable whose members are the line numbers in source files corresponding to each member of FUNCNAME. ${BASH_LINENO[$i]} is the line number in the source file where ${FUNCNAME[$i]} was called. The corresponding source file name is ${BASH_SOURCE[$i]}. Use LINENO to obtain the current line number.
BASH_REMATCH
An array variable whose members are assigned by the ‘=~’ binary operator to the [[ conditional command (see Conditional Constructs). The element with index 0 is the portion of the string matching the entire regular expression. The element with index n is the portion of the string matching the nth parenthesized subexpression. This variable is read-only.
BASH_SOURCE
An array variable whose members are the source filenames corresponding to the elements in the FUNCNAME array variable.
BASH_SUBSHELL
Incremented by one each time a subshell or subshell environment is spawned. The initial value is 0.
BASH_VERSINFO
A readonly array variable (see Arrays) whose members hold version information for this instance of Bash. The values assigned to the array members are as follows:
BASH_VERSINFO[0]
The major version number (the release).
BASH_VERSINFO[1]
The minor version number (the version).
BASH_VERSINFO[2]
The patch level.
BASH_VERSINFO[3]
The build version.
BASH_VERSINFO[4]
The release status (e.g., beta1).
BASH_VERSINFO[5]
The value of MACHTYPE.

BASH_VERSION
The version number of the current instance of Bash.
COLUMNS
Used by the select builtin command to determine the terminal width when printing selection lists. Automatically set upon receipt of a SIGWINCH.
COMP_CWORD
An index into ${COMP_WORDS} of the word containing the current cursor position. This variable is available only in shell functions invoked by the programmable completion facilities (see Programmable Completion).
COMP_LINE
The current command line. This variable is available only in shell functions and external commands invoked by the programmable completion facilities (see Programmable Completion).
COMP_POINT
The index of the current cursor position relative to the beginning of the current command. If the current cursor position is at the end of the current command, the value of this variable is equal to ${#COMP_LINE}. This variable is available only in shell functions and external commands invoked by the programmable completion facilities (see Programmable Completion).
COMP_WORDBREAKS
The set of characters that the Readline library treats as word separators when performing word completion. If COMP_WORDBREAKS is unset, it loses its special properties, even if it is subsequently reset.
COMP_WORDS
An array variable consisting of the individual words in the current command line. The words are split on shell metacharacters as the shell parser would separate them. This variable is available only in shell functions invoked by the programmable completion facilities (see Programmable Completion).
COMPREPLY
An array variable from which Bash reads the possible completions generated by a shell function invoked by the programmable completion facility (see Programmable Completion).
DIRSTACK
An array variable containing the current contents of the directory stack. Directories appear in the stack in the order they are displayed by the dirs builtin. Assigning to members of this array variable may be used to modify directories already in the stack, but the pushd and popd builtins must be used to add and remove directories. Assignment to this variable will not change the current directory. If DIRSTACK is unset, it loses its special properties, even if it is subsequently reset.
EMACS
If Bash finds this variable in the environment when the shell starts with value ‘t’, it assumes that the shell is running in an emacs shell buffer and disables line editing.
EUID
The numeric effective user id of the current user. This variable is readonly.
FCEDIT
The editor used as a default by the -e option to the fc builtin command.
FIGNORE
A colon-separated list of suffixes to ignore when performing filename completion. A file name whose suffix matches one of the entries in FIGNORE is excluded from the list of matched file names. A sample value is ‘.o:~
FUNCNAME
An array variable containing the names of all shell functions currently in the execution call stack. The element with index 0 is the name of any currently-executing shell function. The bottom-most element is "main". This variable exists only when a shell function is executing. Assignments to FUNCNAME have no effect and return an error status. If FUNCNAME is unset, it loses its special properties, even if it is subsequently reset.
GLOBIGNORE
A colon-separated list of patterns defining the set of filenames to be ignored by filename expansion. If a filename matched by a filename expansion pattern also matches one of the patterns in GLOBIGNORE, it is removed from the list of matches.
GROUPS
An array variable containing the list of groups of which the current user is a member. Assignments to GROUPS have no effect and return an error status. If GROUPS is unset, it loses its special properties, even if it is subsequently reset.
histchars
Up to three characters which control history expansion, quick substitution, and tokenization (see History Interaction). The first character is the history expansion character, that is, the character which signifies the start of a history expansion, normally ‘!’. The second character is the character which signifies `quick substitution' when seen as the first character on a line, normally ‘^’. The optional third character is the character which indicates that the remainder of the line is a comment when found as the first character of a word, usually ‘#’. The history comment character causes history substitution to be skipped for the remaining words on the line. It does not necessarily cause the shell parser to treat the rest of the line as a comment.
HISTCMD
The history number, or index in the history list, of the current command. If HISTCMD is unset, it loses its special properties, even if it is subsequently reset.
HISTCONTROL
A colon-separated list of values controlling how commands are saved on the history list. If the list of values includes ‘ignorespace’, lines which begin with a space character are not saved in the history list. A value of ‘ignoredups’ causes lines which match the previous history entry to not be saved. A value of ‘ignoreboth’ is shorthand for ‘ignorespace’ and ‘ignoredups’. A value of ‘erasedups’ causes all previous lines matching the current line to be removed from the history list before that line is saved. Any value not in the above list is ignored. If HISTCONTROL is unset, or does not include a valid value, all lines read by the shell parser are saved on the history list, subject to the value of HISTIGNORE. The second and subsequent lines of a multi-line compound command are not tested, and are added to the history regardless of the value of HISTCONTROL.
HISTFILE
The name of the file to which the command history is saved. The default value is ~/.bash_history.
HISTFILESIZE
The maximum number of lines contained in the history file. When this variable is assigned a value, the history file is truncated, if necessary, by removing the oldest entries, to contain no more than that number of lines. The history file is also truncated to this size after writing it when an interactive shell exits. The default value is 500.
HISTIGNORE
A colon-separated list of patterns used to decide which command lines should be saved on the history list. Each pattern is anchored at the beginning of the line and must match the complete line (no implicit ‘*’ is appended). Each pattern is tested against the line after the checks specified by HISTCONTROL are applied. In addition to the normal shell pattern matching characters, ‘&’ matches the previous history line. ‘&’ may be escaped using a backslash; the backslash is removed before attempting a match. The second and subsequent lines of a multi-line compound command are not tested, and are added to the history regardless of the value of HISTIGNORE.

HISTIGNORE subsumes the function of HISTCONTROL. A pattern of ‘&’ is identical to ignoredups, and a pattern of ‘[ ]*’ is identical to ignorespace. Combining these two patterns, separating them with a colon, provides the functionality of ignoreboth.

HISTSIZE
The maximum number of commands to remember on the history list. The default value is 500.
HISTTIMEFORMAT
If this variable is set and not null, its value is used as a format string for strftime to print the time stamp associated with each history entry displayed by the history builtin. If this variable is set, time stamps are written to the history file so they may be preserved across shell sessions.
HOSTFILE
Contains the name of a file in the same format as /etc/hosts that should be read when the shell needs to complete a hostname. The list of possible hostname completions may be changed while the shell is running; the next time hostname completion is attempted after the value is changed, Bash adds the contents of the new file to the existing list. If HOSTFILE is set, but has no value, Bash attempts to read /etc/hosts to obtain the list of possible hostname completions. When HOSTFILE is unset, the hostname list is cleared.
HOSTNAME
The name of the current host.
HOSTTYPE
A string describing the machine Bash is running on.
IGNOREEOF
Controls the action of the shell on receipt of an EOF character as the sole input. If set, the value denotes the number of consecutive EOF characters that can be read as the first character on an input line before the shell will exit. If the variable exists but does not have a numeric value (or has no value) then the default is 10. If the variable does not exist, then EOF signifies the end of input to the shell. This is only in effect for interactive shells.
INPUTRC
The name of the Readline initialization file, overriding the default of ~/.inputrc.
LANG
Used to determine the locale category for any category not specifically selected with a variable starting with LC_.
LC_ALL
This variable overrides the value of LANG and any other LC_ variable specifying a locale category.
LC_COLLATE
This variable determines the collation order used when sorting the results of filename expansion, and determines the behavior of range expressions, equivalence classes, and collating sequences within filename expansion and pattern matching (see Filename Expansion).
LC_CTYPE
This variable determines the interpretation of characters and the behavior of character classes within filename expansion and pattern matching (see Filename Expansion).
LC_MESSAGES
This variable determines the locale used to translate double-quoted strings preceded by a ‘$’ (see Locale Translation).
LC_NUMERIC
This variable determines the locale category used for number formatting.
LINENO
The line number in the script or shell function currently executing.
LINES
Used by the select builtin command to determine the column length for printing selection lists. Automatically set upon receipt of a SIGWINCH.
MACHTYPE
A string that fully describes the system type on which Bash is executing, in the standard gnu cpu-company-system format.
MAILCHECK
How often (in seconds) that the shell should check for mail in the files specified in the MAILPATH or MAIL variables. The default is 60 seconds. When it is time to check for mail, the shell does so before displaying the primary prompt. If this variable is unset, or set to a value that is not a number greater than or equal to zero, the shell disables mail checking.
OLDPWD
The previous working directory as set by the cd builtin.
OPTERR
If set to the value 1, Bash displays error messages generated by the getopts builtin command.
OSTYPE
A string describing the operating system Bash is running on.
PIPESTATUS
An array variable (see Arrays) containing a list of exit status values from the processes in the most-recently-executed foreground pipeline (which may contain only a single command).
POSIXLY_CORRECT
If this variable is in the environment when bash starts, the shell enters posix mode (see Bash POSIX Mode) before reading the startup files, as if the --posix invocation option had been supplied. If it is set while the shell is running, bash enables posix mode, as if the command
          set -o posix

had been executed.

PPID
The process id of the shell's parent process. This variable is readonly.
PROMPT_COMMAND
If set, the value is interpreted as a command to execute before the printing of each primary prompt ($PS1).
PS3
The value of this variable is used as the prompt for the select command. If this variable is not set, the select command prompts with ‘#?
PS4
The value is the prompt printed before the command line is echoed when the -x option is set (see The Set Builtin). The first character of PS4 is replicated multiple times, as necessary, to indicate multiple levels of indirection. The default is ‘+ ’.
PWD
The current working directory as set by the cd builtin.
RANDOM
Each time this parameter is referenced, a random integer between 0 and 32767 is generated. Assigning a value to this variable seeds the random number generator.
REPLY
The default variable for the read builtin.
SECONDS
This variable expands to the number of seconds since the shell was started. Assignment to this variable resets the count to the value assigned, and the expanded value becomes the value assigned plus the number of seconds since the assignment.
SHELL
The full pathname to the shell is kept in this environment variable. If it is not set when the shell starts, Bash assigns to it the full pathname of the current user's login shell.
SHELLOPTS
A colon-separated list of enabled shell options. Each word in the list is a valid argument for the -o option to the set builtin command (see The Set Builtin). The options appearing in SHELLOPTS are those reported as ‘on’ by ‘set -o’. If this variable is in the environment when Bash starts up, each shell option in the list will be enabled before reading any startup files. This variable is readonly.
SHLVL
Incremented by one each time a new instance of Bash is started. This is intended to be a count of how deeply your Bash shells are nested.
TIMEFORMAT
The value of this parameter is used as a format string specifying how the timing information for pipelines prefixed with the time reserved word should be displayed. The ‘%’ character introduces an escape sequence that is expanded to a time value or other information. The escape sequences and their meanings are as follows; the braces denote optional portions.
%%
A literal ‘%’.
%[p][l]R
The elapsed time in seconds.
%[p][l]U
The number of CPU seconds spent in user mode.
%[p][l]S
The number of CPU seconds spent in system mode.
%P
The CPU percentage, computed as (%U + %S) / %R.

The optional p is a digit specifying the precision, the number of fractional digits after a decimal point. A value of 0 causes no decimal point or fraction to be output. At most three places after the decimal point may be specified; values of p greater than 3 are changed to 3. If p is not specified, the value 3 is used.

The optional l specifies a longer format, including minutes, of the form MMmSS.FFs. The value of p determines whether or not the fraction is included.

If this variable is not set, Bash acts as if it had the value

          $'\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS'

If the value is null, no timing information is displayed. A trailing newline is added when the format string is displayed.

TMOUT
If set to a value greater than zero, TMOUT is treated as the default timeout for the read builtin (see Bash Builtins). The select command (see Conditional Constructs) terminates if input does not arrive after TMOUT seconds when input is coming from a terminal.

In an interative shell, the value is interpreted as the number of seconds to wait for input after issuing the primary prompt when the shell is interactive. Bash terminates after that number of seconds if input does not arrive.

TMPDIR
If set, Bash uses its value as the name of a directory in which Bash creates temporary files for the shell's use.
UID
The numeric real user id of the current user. This variable is readonly.


Next: , Previous: Shell Variables, Up: Top

6 Bash Features

This section describes features unique to Bash.


Next: , Up: Bash Features

6.1 Invoking Bash

     bash [long-opt] [-ir] [-abefhkmnptuvxdBCDHP] [-o option] [-O shopt_option] [argument ...]
     bash [long-opt] [-abefhkmnptuvxdBCDHP] [-o option] [-O shopt_option] -c string [argument ...]
     bash [long-opt] -s [-abefhkmnptuvxdBCDHP] [-o option] [-O shopt_option] [argument ...]

In addition to the single-character shell command-line options (see The Set Builtin), there are several multi-character options that you can use. These options must appear on the command line before the single-character options to be recognized.

--debugger
Arrange for the debugger profile to be executed before the shell starts. Turns on extended debugging mode (see Bash Builtins for a description of the extdebug option to the shopt builtin) and shell function tracing (see The Set Builtin for a description of the -o functrace option).
--dump-po-strings
A list of all double-quoted strings preceded by ‘$’ is printed on the standard output in the gnu gettext PO (portable object) file format. Equivalent to -D except for the output format.
--dump-strings
Equivalent to -D.
--help
Display a usage message on standard output and exit sucessfully.
--init-file filename
--rcfile filename
Execute commands from filename (instead of ~/.bashrc) in an interactive shell.
--login
Equivalent to -l.
--noediting
Do not use the gnu Readline library (see Command Line Editing) to read command lines when the shell is interactive.
--noprofile
Don't load the system-wide startup file /etc/profile or any of the personal initialization files ~/.bash_profile, ~/.bash_login, or ~/.profile when Bash is invoked as a login shell.
--norc
Don't read the ~/.bashrc initialization file in an interactive shell. This is on by default if the shell is invoked as sh.
--posix
Change the behavior of Bash where the default operation differs from the posix standard to match the standard. This is intended to make Bash behave as a strict superset of that standard. See Bash POSIX Mode, for a description of the Bash posix mode.
--restricted
Make the shell a restricted shell (see The Restricted Shell).
--verbose
Equivalent to -v. Print shell input lines as they're read.
--version
Show version information for this instance of Bash on the standard output and exit successfully.

There are several single-character options that may be supplied at invocation which are not available with the set builtin.

-c string
Read and execute commands from string after processing the options, then exit. Any remaining arguments are assigned to the positional parameters, starting with $0.
-i
Force the shell to run interactively. Interactive shells are described in Interactive Shells.
-l
Make this shell act as if it had been directly invoked by login. When the shell is interactive, this is equivalent to starting a login shell with ‘exec -l bash’. When the shell is not interactive, the login shell startup files will be executed. ‘exec bash -l’ or ‘exec bash --login’ will replace the current shell with a Bash login shell. See Bash Startup Files, for a description of the special behavior of a login shell.
-r
Make the shell a restricted shell (see The Restricted Shell).
-s
If this option is present, or if no arguments remain after option processing, then commands are read from the standard input. This option allows the positional parameters to be set when invoking an interactive shell.
-D
A list of all double-quoted strings preceded by ‘$’ is printed on the standard output. These are the strings that are subject to language translation when the current locale is not C or POSIX (see Locale Translation). This implies the -n option; no commands will be executed.
[-+]O [shopt_option]
shopt_option is one of the shell options accepted by the shopt builtin (see Shell Builtin Commands). If shopt_option is present, -O sets the value of that option; +O unsets it. If shopt_option is not supplied, the names and values of the shell options accepted by shopt are printed on the standard output. If the invocation option is +O, the output is displayed in a format that may be reused as input.
--
A -- signals the end of options and disables further option processing. Any arguments after the -- are treated as filenames and arguments.

A login shell is one whose first character of argument zero is ‘-’, or one invoked with the --login option.

An interactive shell is one started without non-option arguments, unless -s is specified, without specifying the -c option, and whose input and output are both connected to terminals (as determined by isatty(3)), or one started with the -i option. See Interactive Shells, for more information.

If arguments remain after option processing, and neither the -c nor the -s option has been supplied, the first argument is assumed to be the name of a file containing shell commands (see Shell Scripts). When Bash is invoked in this fashion, $0 is set to the name of the file, and the positional parameters are set to the remaining arguments. Bash reads and executes commands from this file, then exits. Bash's exit status is the exit status of the last command executed in the script. If no commands are executed, the exit status is 0.


Next: , Previous: Invoking Bash, Up: Bash Features

6.2 Bash Startup Files

This section describs how Bash executes its startup files. If any of the files exist but cannot be read, Bash reports an error. Tildes are expanded in file names as described above under Tilde Expansion (see Tilde Expansion).

Interactive shells are described in Interactive Shells.

Invoked as an interactive login shell, or with --login

When Bash is invoked as an interactive login shell, or as a non-interactive shell with the --login option, it first reads and executes commands from the file /etc/profile, if that file exists. After reading that file, it looks for ~/.bash_profile, ~/.bash_login, and ~/.profile, in that order, and reads and executes commands from the first one that exists and is readable. The --noprofile option may be used when the shell is started to inhibit this behavior.

When a login shell exits, Bash reads and executes commands from the file ~/.bash_logout, if it exists.

Invoked as an interactive non-login shell

When an interactive shell that is not a login shell is started, Bash reads and executes commands from ~/.bashrc, if that file exists. This may be inhibited by using the --norc option. The --rcfile file option will force Bash to read and execute commands from file instead of ~/.bashrc.

So, typically, your ~/.bash_profile contains the line

     if [ -f ~/.bashrc ]; then . ~/.bashrc; fi

after (or before) any login-specific initializations.

Invoked non-interactively

When Bash is started non-interactively, to run a shell script, for example, it looks for the variable BASH_ENV in the environment, expands its value if it appears there, and uses the expanded value as the name of a file to read and execute. Bash behaves as if the following command were executed:

     if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi

but the value of the PATH variable is not used to search for the file name.

As noted above, if a non-interactive shell is invoked with the --login option, Bash attempts to read and execute commands from the login shell startup files.

Invoked with name sh

If Bash is invoked with the name sh, it tries to mimic the startup behavior of historical versions of sh as closely as possible, while conforming to the posix standard as well.

When invoked as an interactive login shell, or as a non-interactive shell with the --login option, it first attempts to read and execute commands from /etc/profile and ~/.profile, in that order. The --noprofile option may be used to inhibit this behavior. When invoked as an interactive shell with the name sh, Bash looks for the variable ENV, expands its value if it is defined, and uses the expanded value as the name of a file to read and execute. Since a shell invoked as sh does not attempt to read and execute commands from any other startup files, the --rcfile option has no effect. A non-interactive shell invoked with the name sh does not attempt to read any other startup files.

When invoked as sh, Bash enters posix mode after the startup files are read.

Invoked in posix mode

When Bash is started in posix mode, as with the --posix command line option, it follows the posix standard for startup files. In this mode, interactive shells expand the ENV variable and commands are read and executed from the file whose name is the expanded value. No other startup files are read.

Invoked by remote shell daemon

Bash attempts to determine when it is being run by the remote shell daemon, usually rshd. If Bash determines it is being run by rshd, it reads and executes commands from ~/.bashrc, if that file exists and is readable. It will not do this if invoked as sh. The --norc option may be used to inhibit this behavior, and the --rcfile option may be used to force another file to be read, but rshd does not generally invoke the shell with those options or allow them to be specified.

Invoked with unequal effective and real uid/gids

If Bash is started with the effective user (group) id not equal to the real user (group) id, and the -p option is not supplied, no startup files are read, shell functions are not inherited from the environment, the SHELLOPTS variable, if it appears in the environment, is ignored, and the effective user id is set to the real user id. If the -p option is supplied at invocation, the startup behavior is the same, but the effective user id is not reset.


Next: , Previous: Bash Startup Files, Up: Bash Features

6.3 Interactive Shells


Next: , Up: Interactive Shells

6.3.1 What is an Interactive Shell?

An interactive shell is one started without non-option arguments, unless -s is specified, without specifiying the -c option, and whose input and error output are both connected to terminals (as determined by isatty(3)), or one started with the -i option.

An interactive shell generally reads from and writes to a user's terminal.

The -s invocation option may be used to set the positional parameters when an interactive shell is started.


Next: , Previous: What is an Interactive Shell?, Up: Interactive Shells

6.3.2 Is this Shell Interactive?

To determine within a startup script whether or not Bash is running interactively, test the value of the ‘-’ special parameter. It contains i when the shell is interactive. For example:

     case "$-" in
     *i*)	echo This shell is interactive ;;
     *)	echo This shell is not interactive ;;
     esac

Alternatively, startup scripts may examine the variable PS1; it is unset in non-interactive shells, and set in interactive shells. Thus:

     if [ -z "$PS1" ]; then
             echo This shell is not interactive
     else
             echo This shell is interactive
     fi


Previous: Is this Shell Interactive?, Up: Interactive Shells

6.3.3 Interactive Shell Behavior

When the shell is running interactively, it changes its behavior in several ways.

  1. Startup files are read and executed as described in Bash Startup Files.
  2. Job Control (see Job Control) is enabled by default. When job control is in effect, Bash ignores the keyboard-generated job control signals SIGTTIN, SIGTTOU, and SIGTSTP.
  3. Bash expands and displays PS1 before reading the first line of a command, and expands and displays PS2 before reading the second and subsequent lines of a multi-line command.
  4. Bash executes the value of the PROMPT_COMMAND variable as a command before printing the primary prompt, $PS1 (see Bash Variables).
  5. Readline (see Command Line Editing) is used to read commands from the user's terminal.
  6. Bash inspects the value of the ignoreeof option to set -o instead of exiting immediately when it receives an EOF on its standard input when reading a command (see The Set Builtin).
  7. Command history (see Bash History Facilities) and history expansion (see History Interaction) are enabled by default. Bash will save the command history to the file named by $HISTFILE when an interactive shell exits.
  8. Alias expansion (see Aliases) is performed by default.
  9. In the absence of any traps, Bash ignores SIGTERM (see Signals).
  10. In the absence of any traps, SIGINT is caught and handled ((see Signals). SIGINT will interrupt some shell builtins.
  11. An interactive login shell sends a SIGHUP to all jobs on exit if the hupoxexit shell option has been enabled (see Signals).
  12. The -n invocation option is ignored, and ‘set -n’ has no effect (see The Set Builtin).
  13. Bash will check for mail periodically, depending on the values of the MAIL, MAILPATH, and MAILCHECK shell variables (see Bash Variables).
  14. Expansion errors due to references to unbound shell variables after ‘set -u’ has been enabled will not cause the shell to exit (see The Set Builtin).
  15. The shell will not exit on expansion errors caused by var being unset or null in ${var:?word} expansions (see Shell Parameter Expansion).
  16. Redirection errors encountered by shell builtins will not cause the shell to exit.
  17. When running in posix mode, a special builtin returning an error status will not cause the shell to exit (see Bash POSIX Mode).
  18. A failed exec will not cause the shell to exit (see Bourne Shell Builtins).
  19. Parser syntax errors will not cause the shell to exit.
  20. Simple spelling correction for directory arguments to the cd builtin is enabled by default (see the description of the cdspell option to the shopt builtin in Bash Builtins).
  21. The shell will check the value of the TMOUT variable and exit if a command is not read within the specified number of seconds after printing $PS1 (see Bash Variables).


Next: , Previous: Interactive Shells, Up: Bash Features

6.4 Bash Conditional Expressions

Conditional expressions are used by the [[ compound command and the test and [ builtin commands.

Expressions may be unary or binary. Unary expressions are often used to examine the status of a file. There are string operators and numeric comparison operators as well. If the file argument to one of the primaries is of the form /dev/fd/N, then file descriptor N is checked. If the file argument to one of the primaries is one of /dev/stdin, /dev/stdout, or /dev/stderr, file descriptor 0, 1, or 2, respectively, is checked.

Unless otherwise specified, primaries that operate on files follow symbolic links and operate on the target of the link, rather than the link itself.

-a file
True if file exists.
-b file
True if file exists and is a block special file.
-c file
True if file exists and is a character special file.
-d file
True if file exists and is a directory.
-e file
True if file exists.
-f file
True if file exists and is a regular file.
-g file
True if file exists and its set-group-id bit is set.
-h file
True if file exists and is a symbolic link.
-k file
True if file exists and its "sticky" bit is set.
-p file
True if file exists and is a named pipe (FIFO).
-r file
True if file exists and is readable.
-s file
True if file exists and has a size greater than zero.
-t fd
True if file descriptor fd is open and refers to a terminal.
-u file
True if file exists and its set-user-id bit is set.
-w file
True if file exists and is writable.
-x file
True if file exists and is executable.
-O file
True if file exists and is owned by the effective user id.
-G file
True if file exists and is owned by the effective group id.
-L file
True if file exists and is a symbolic link.
-S file
True if file exists and is a socket.
-N file
True if file exists and has been modified since it was last read.
file1 -nt file2
True if file1 is newer (according to modification date) than file2, or if file1 exists and file2 does not.
file1 -ot file2
True if file1 is older than file2, or if file2 exists and file1 does not.
file1 -ef file2
True if file1 and file2 refer to the same device and inode numbers.
-o optname
True if shell option optname is enabled. The list of options appears in the description of the -o option to the set builtin (see The Set Builtin).
-z string
True if the length of string is zero.
-n string
string
True if the length of string is non-zero.
string1 == string2
True if the strings are equal. ‘=’ may be used in place of ‘==’ for strict posix compliance.
string1 != string2
True if the strings are not equal.
string1 < string2
True if string1 sorts before string2 lexicographically in the current locale.
string1 > string2
True if string1 sorts after string2 lexicographically in the current locale.
arg1 OP arg2
OP is one of ‘-eq’, ‘-ne’, ‘-lt’, ‘-le’, ‘-gt’, or ‘-ge’. These arithmetic binary operators return true if arg1 is equal to, not equal to, less than, less than or equal to, greater than, or greater than or equal to arg2, respectively. Arg1 and arg2 may be positive or negative integers.


Next: , Previous: Bash Conditional Expressions, Up: Bash Features

6.5 Shell Arithmetic

The shell allows arithmetic expressions to be evaluated, as one of the shell expansions or by the let and the -i option to the declare builtins.

Evaluation is done in fixed-width integers with no check for overflow, though division by 0 is trapped and flagged as an error. The operators and their precedence, associativity, and values are the same as in the C language. The following list of operators is grouped into levels of equal-precedence operators. The levels are listed in order of decreasing precedence.

id++ id--
variable post-increment and post-decrement
++id --id
variable pre-increment and pre-decrement
- +
unary minus and plus
! ~
logical and bitwise negation
**
exponentiation
* / %
multiplication, division, remainder
+ -
addition, subtraction
<< >>
left and right bitwise shifts
<= >= < >
comparison
== !=
equality and inequality
&
bitwise AND
^
bitwise exclusive OR
|
bitwise OR
&&
logical AND
||
logical OR
expr ? expr : expr
conditional operator
= *= /= %= += -= <<= >>= &= ^= |=
assignment
expr1 , expr2
comma

Shell variables are allowed as operands; parameter expansion is performed before the expression is evaluated. Within an expression, shell variables may also be referenced by name without using the parameter expansion syntax. A shell variable that is null or unset evaluates to 0 when referenced by name without using the parameter expansion syntax. The value of a variable is evaluated as an arithmetic expression when it is referenced, or when a variable which has been given the integer attribute using ‘declare -i’ is assigned a value. A null value evaluates to 0. A shell variable need not have its integer attribute turned on to be used in an expression.

Constants with a leading 0 are interpreted as octal numbers. A leading ‘0x’ or ‘0X’ denotes hexadecimal. Otherwise, numbers take the form [base#]n, where base is a decimal number between 2 and 64 representing the arithmetic base, and n is a number in that base. If base# is omitted, then base 10 is used. The digits greater than 9 are represented by the lowercase letters, the uppercase letters, ‘@’, and ‘_’, in that order. If base is less than or equal to 36, lowercase and uppercase letters may be used interchangeably to represent numbers between 10 and 35.

Operators are evaluated in order of precedence. Sub-expressions in parentheses are evaluated first and may override the precedence rules above.


Next: , Previous: Shell Arithmetic, Up: Bash Features

6.6 Aliases

Aliases allow a string to be substituted for a word when it is used as the first word of a simple command. The shell maintains a list of aliases that may be set and unset with the alias and unalias builtin commands.

The first word of each simple command, if unquoted, is checked to see if it has an alias. If so, that word is replaced by the text of the alias. The characters ‘/’, ‘$’, ‘`’, ‘=’ and any of the shell metacharacters or quoting characters listed above may not appear in an alias name. The replacement text may contain any valid shell input, including shell metacharacters. The first word of the replacement text is tested for aliases, but a word that is identical to an alias being expanded is not expanded a second time. This means that one may alias ls to "ls -F", for instance, and Bash does not try to recursively expand the replacement text. If the last character of the alias value is a space or tab character, then the next command word following the alias is also checked for alias expansion.

Aliases are created and listed with the alias command, and removed with the unalias command.

There is no mechanism for using arguments in the replacement text, as in csh. If arguments are needed, a shell function should be used (see Shell Functions).

Aliases are not expanded when the shell is not interactive, unless the expand_aliases shell option is set using shopt (see Bash Builtins).

The rules concerning the definition and use of aliases are somewhat confusing. Bash always reads at least one complete line of input before executing any of the commands on that line. Aliases are expanded when a command is read, not when it is executed. Therefore, an alias definition appearing on the same line as another command does not take effect until the next line of input is read. The commands following the alias definition on that line are not affected by the new alias. This behavior is also an issue when functions are executed. Aliases are expanded when a function definition is read, not when the function is executed, because a function definition is itself a compound command. As a consequence, aliases defined in a function are not available until after that function is executed. To be safe, always put alias definitions on a separate line, and do not use alias in compound commands.

For almost every purpose, shell functions are preferred over aliases.


Next: , Previous: Aliases, Up: Bash Features

6.7 Arrays

Bash provides one-dimensional array variables. Any variable may be used as an array; the declare builtin will explicitly declare an array. There is no maximum limit on the size of an array, nor any requirement that members be indexed or assigned contiguously. Arrays are zero-based.

An array is created automatically if any variable is assigned to using the syntax

     name[subscript]=value

The subscript is treated as an arithmetic expression that must evaluate to a number greater than or equal to zero. To explicitly declare an array, use

     declare -a name

The syntax

     declare -a name[subscript]

is also accepted; the subscript is ignored. Attributes may be specified for an array variable using the declare and readonly builtins. Each attribute applies to all members of an array.

Arrays are assigned to using compound assignments of the form

     name=(value1 ... valuen)

where each value is of the form [[subscript]=]string. If the optional subscript is supplied, that index is assigned to; otherwise the index of the element assigned is the last index assigned to by the statement plus one. Indexing starts at zero. This syntax is also accepted by the declare builtin. Individual array elements may be assigned to using the name[subscript]=value syntax introduced above.

Any element of an array may be referenced using ${name[subscript]}. The braces are required to avoid conflicts with the shell's filename expansion operators. If the subscript is ‘@’ or ‘*’, the word expands to all members of the array name. These subscripts differ only when the word appears within double quotes. If the word is double-quoted, ${name[*]} expands to a single word with the value of each array member separated by the first character of the IFS variable, and ${name[@]} expands each element of name to a separate word. When there are no array members, ${name[@]} expands to nothing. If the double-quoted expansion occurs within a word, the expansion of the first parameter is joined with the beginning part of the original word, and the expansion of the last parameter is joined with the last part of the original word. This is analogous to the expansion of the special parameters ‘@’ and ‘*’. ${#name[subscript]} expands to the length of ${name[subscript]}. If subscript is ‘@’ or ‘*’, the expansion is the number of elements in the array. Referencing an array variable without a subscript is equivalent to referencing element zero.

The unset builtin is used to destroy arrays. unset name[subscript] destroys the array element at index subscript. Care must be taken to avoid unwanted side effects caused by filename generation. unset name, where name is an array, removes the entire array. A subscript of ‘*’ or ‘@’ also removes the entire array.

The declare, local, and readonly builtins each accept a -a option to specify an array. The read builtin accepts a -a option to assign a list of words read from the standard input to an array, and can read values from the standard input into individual array elements. The set and declare builtins display array values in a way that allows them to be reused as input.


Next: , Previous: Arrays, Up: Bash Features

6.8 The Directory Stack

The directory stack is a list of recently-visited directories. The pushd builtin adds directories to the stack as it changes the current directory, and the popd builtin removes specified directories from the stack and changes the current directory to the directory removed. The dirs builtin displays the contents of the directory stack.

The contents of the directory stack are also visible as the value of the DIRSTACK shell variable.


Up: The Directory Stack

6.8.1 Directory Stack Builtins

dirs
          dirs [+N | -N] [-clpv]

Display the list of currently remembered directories. Directories are added to the list with the pushd command; the popd command removes directories from the list.

+N
Displays the Nth directory (counting from the left of the list printed by dirs when invoked without options), starting with zero.
-N
Displays the Nth directory (counting from the right of the list printed by dirs when invoked without options), starting with zero.
-c
Clears the directory stack by deleting all of the elements.
-l
Produces a longer listing; the default listing format uses a tilde to denote the home directory.
-p
Causes dirs to print the directory stack with one entry per line.
-v
Causes dirs to print the directory stack with one entry per line, prefixing each entry with its index in the stack.

popd
          popd [+N | -N] [-n]

Remove the top entry from the directory stack, and cd to the new top directory. When no arguments are given, popd removes the top directory from the stack and performs a cd to the new top directory. The elements are numbered from 0 starting at the first directory listed with dirs; i.e., popd is equivalent to popd +0.

+N
Removes the Nth directory (counting from the left of the list printed by dirs), starting with zero.
-N
Removes the Nth directory (counting from the right of the list printed by dirs), starting with zero.
-n
Suppresses the normal change of directory when removing directories from the stack, so that only the stack is manipulated.


pushd
          pushd [dir | +N | -N] [-n]

Save the current directory on the top of the directory stack and then cd to dir. With no arguments, pushd exchanges the top two directories.

+N
Brings the Nth directory (counting from the left of the list printed by dirs, starting with zero) to the top of the list by rotating the stack.
-N
Brings the Nth directory (counting from the right of the list printed by dirs, starting with zero) to the top of the list by rotating the stack.
-n
Suppresses the normal change of directory when adding directories to the stack, so that only the stack is manipulated.
dir
Makes the current working directory be the top of the stack, and then executes the equivalent of `cd dir'. cds to dir.


Next: , Previous: The Directory Stack, Up: Bash Features

6.9 Controlling the Prompt

The value of the variable PROMPT_COMMAND is examined just before Bash prints each primary prompt. If PROMPT_COMMAND is set and has a non-null value, then the value is executed just as if it had been typed on the command line.

In addition, the following table describes the special characters which can appear in the prompt variables:

\a
A bell character.
\d
The date, in "Weekday Month Date" format (e.g., "Tue May 26").
\D{format}
The format is passed to strftime(3) and the result is inserted into the prompt string; an empty format results in a locale-specific time representation. The braces are required.
\e
An escape character.
\h
The hostname, up to the first `.'.
\H
The hostname.
\j
The number of jobs currently managed by the shell.
\l
The basename of the shell's terminal device name.
\n
A newline.
\r
A carriage return.
\s
The name of the shell, the basename of $0 (the portion following the final slash).
\t
The time, in 24-hour HH:MM:SS format.
\T
The time, in 12-hour HH:MM:SS format.
\@
The time, in 12-hour am/pm format.
\A
The time, in 24-hour HH:MM format.
\u
The username of the current user.
\v
The version of Bash (e.g., 2.00)
\V
The release of Bash, version + patchlevel (e.g., 2.00.0)
\w
The current working directory, with $HOME abbreviated with a tilde.
\W
The basename of $PWD, with $HOME abbreviated with a tilde.
\!
The history number of this command.
\#
The command number of this command.
\$
If the effective uid is 0, #, otherwise $.
\nnn
The character whose ASCII code is the octal value nnn.
\\
A backslash.
\[
Begin a sequence of non-printing characters. This could be used to embed a terminal control sequence into the prompt.
\]
End a sequence of non-printing characters.

The command number and the history number are usually different: the history number of a command is its position in the history list, which may include commands restored from the history file (see Bash History Facilities), while the command number is the position in the sequence of commands executed during the current shell session.

After the string is decoded, it is expanded via parameter expansion, command substitution, arithmetic expansion, and quote removal, subject to the value of the promptvars shell option (see Bash Builtins).


Next: , Previous: Printing a Prompt, Up: Bash Features

6.10 The Restricted Shell

If Bash is started with the name rbash, or the --restricted or -r option is supplied at invocation, the shell becomes restricted. A restricted shell is used to set up an environment more controlled than the standard shell. A restricted shell behaves identically to bash with the exception that the following are disallowed or not performed:

These restrictions are enforced after any startup files are read.

When a command that is found to be a shell script is executed (see Shell Scripts), rbash turns off any restrictions in the shell spawned to execute the script.


Previous: The Restricted Shell, Up: Bash Features

6.11 Bash POSIX Mode

Starting Bash with the --posix command-line option or executing ‘set -o posix’ while Bash is running will cause Bash to conform more closely to the posix standard by changing the behavior to match that specified by posix in areas where the Bash default differs.

When invoked as sh, Bash enters posix mode after reading the startup files.

The following list is what's changed when `posix mode' is in effect:

  1. When a command in the hash table no longer exists, Bash will re-search $PATH to find the new location. This is also available with ‘shopt -s checkhash’.
  2. The message printed by the job control code and builtins when a job exits with a non-zero status is `Done(status)'.
  3. The message printed by the job control code and builtins when a job is stopped is `Stopped(signame)', where signame is, for example, SIGTSTP.
  4. The bg builtin uses the required format to describe each job placed in the background, which does not include an indication of whether the job is the current or previous job.
  5. Reserved words appearing in a context where reserved words are recognized do not undergo alias expansion.
  6. The posix PS1 and PS2 expansions of ‘!’ to the history number and ‘!!’ to ‘!’ are enabled, and parameter expansion is performed on the values of PS1 and PS2 regardless of the setting of the promptvars option.
  7. The posix startup files are executed ($ENV) rather than the normal Bash files.
  8. Tilde expansion is only performed on assignments preceding a command name, rather than on all assignment statements on the line.
  9. The default history file is ~/.sh_history (this is the default value of $HISTFILE).
  10. The output of ‘kill -l’ prints all the signal names on a single line, separated by spaces, without the ‘SIG’ prefix.
  11. The kill builtin does not accept signal names with a ‘SIG’ prefix.
  12. Non-interactive shells exit if filename in . filename is not found.
  13. Non-interactive shells exit if a syntax error in an arithmetic expansion results in an invalid expression.
  14. Redirection operators do not perform filename expansion on the word in the redirection unless the shell is interactive.
  15. Redirection operators do not perform word splitting on the word in the redirection.
  16. Function names must be valid shell names. That is, they may not contain characters other than letters, digits, and underscores, and may not start with a digit. Declaring a function with an invalid name causes a fatal syntax error in non-interactive shells.
  17. posix special builtins are found before shell functions during command lookup.
  18. If a posix special builtin returns an error status, a non-interactive shell exits. The fatal errors are those listed in the POSIX standard, and include things like passing incorrect options, redirection errors, variable assignment errors for assignments preceding the command name, and so on.
  19. If CDPATH is set, the cd builtin will not implicitly append the current directory to it. This means that cd will fail if no valid directory name can be constructed from any of the entries in $CDPATH, even if the a directory with the same name as the name given as an argument to cd exists in the current directory.
  20. A non-interactive shell exits with an error status if a variable assignment error occurs when no command name follows the assignment statements. A variable assignment error occurs, for example, when trying to assign a value to a readonly variable.
  21. A non-interactive shell exits with an error status if the iteration variable in a for statement or the selection variable in a select statement is a readonly variable.
  22. Process substitution is not available.
  23. Assignment statements preceding posix special builtins persist in the shell environment after the builtin completes.
  24. Assignment statements preceding shell function calls persist in the shell environment after the function returns, as if a posix special builtin command had been executed.
  25. The export and readonly builtin commands display their output in the format required by posix.
  26. The trap builtin displays signal names without the leading SIG.
  27. The trap builtin doesn't check the first argument for a possible signal specification and revert the signal handling to the original disposition if it is, unless that argument consists solely of digits and is a valid signal number. If users want to reset the handler for a given signal to the original disposition, they should use ‘-’ as the first argument.
  28. The . and source builtins do not search the current directory for the filename argument if it is not found by searching PATH.
  29. Subshells spawned to execute command substitutions inherit the value of the -e option from the parent shell. When not in posix mode, Bash clears the -e option in such subshells.
  30. Alias expansion is always enabled, even in non-interactive shells.
  31. When the alias builtin displays alias definitions, it does not display them with a leading ‘alias ’ unless the -p option is supplied.
  32. When the set builtin is invoked without options, it does not display shell function names and definitions.
  33. When the set builtin is invoked without options, it displays variable values without quotes, unless they contain shell metacharacters, even if the result contains nonprinting characters.
  34. When the cd builtin is invoked in logical mode, and the pathname constructed from $PWD and the directory name supplied as an argument does not refer to an existing directory, cd will fail instead of falling back to physical mode.
  35. When the pwd builtin is supplied the -P option, it resets $PWD to a pathname containing no symlinks.
  36. The pwd builtin verifies that the value it prints is the same as the current directory, even if it is not asked to check the file system with the -P option.
  37. When listing the history, the fc builtin does not include an indication of whether or not a history entry has been modified.
  38. The default editor used by fc is ed.
  39. The type and command builtins will not report a non-executable file as having been found, though the shell will attempt to execute such a file if it is the only so-named file found in $PATH.
  40. The vi editing mode will invoke the vi editor directly when the ‘v’ command is run, instead of checking $FCEDIT and $EDITOR.
  41. When the xpg_echo option is enabled, Bash does not attempt to interpret any arguments to echo as options. Each argument is displayed, after escape characters are converted.

There is other posix behavior that Bash does not implement by default even when in posix mode. Specifically:

  1. The fc builtin checks $EDITOR as a program to edit history entries if FCEDIT is unset, rather than defaulting directly to ed. fc uses ed if EDITOR is unset.
  2. As noted above, Bash requires the xpg_echo option to be enabled for the echo builtin to be fully conformant.

Bash can be configured to be posix-conformant by default, by specifying the --enable-strict-posix-default to configure when building (see Optional Features).


Next: , Previous: Bash Features, Up: Top

7 Job Control

This chapter discusses what job control is, how it works, and how Bash allows you to access its facilities.


Next: , Up: Job Control

7.1 Job Control Basics

Job control refers to the ability to selectively stop (suspend) the execution of processes and continue (resume) their execution at a later point. A user typically employs this facility via an interactive interface supplied jointly by the system's terminal driver and Bash.

The shell associates a job with each pipeline. It keeps a table of currently executing jobs, which may be listed with the jobs command. When Bash starts a job asynchronously, it prints a line that looks like:

     [1] 25647

indicating that this job is job number 1 and that the process id of the last process in the pipeline associated with this job is 25647. All of the processes in a single pipeline are members of the same job. Bash uses the job abstraction as the basis for job control.

To facilitate the implementation of the user interface to job control, the operating system maintains the notion of a current terminal process group id. Members of this process group (processes whose process group id is equal to the current terminal process group id) receive keyboard-generated signals such as SIGINT. These processes are said to be in the foreground. Background processes are those whose process group id differs from the terminal's; such processes are immune to keyboard-generated signals. Only foreground processes are allowed to read from or write to the terminal. Background processes which attempt to read from (write to) the terminal are sent a SIGTTIN (SIGTTOU) signal by the terminal driver, which, unless caught, suspends the process.

If the operating system on which Bash is running supports job control, Bash contains facilities to use it. Typing the suspend character (typically ‘^Z’, Control-Z) while a process is running causes that process to be stopped and returns control to Bash. Typing the delayed suspend character (typically ‘^Y’, Control-Y) causes the process to be stopped when it attempts to read input from the terminal, and control to be returned to Bash. The user then manipulates the state of this job, using the bg command to continue it in the background, the fg command to continue it in the foreground, or the kill command to kill it. A ‘^Z’ takes effect immediately, and has the additional side effect of causing pending output and typeahead to be discarded.

There are a number of ways to refer to a job in the shell. The character ‘%’ introduces a job name.

Job number n may be referred to as ‘%n’. The symbols ‘%%’ and ‘%+’ refer to the shell's notion of the current job, which is the last job stopped while it was in the foreground or started in the background. A single ‘%’ (with no accompanying job specification) also refers to the current job. The previous job may be referenced using ‘%-’. In output pertaining to jobs (e.g., the output of the jobs command), the current job is always flagged with a ‘+’, and the previous job with a ‘-’.

A job may also be referred to using a prefix of the name used to start it, or using a substring that appears in its command line. For example, ‘%ce’ refers to a stopped ce job. Using ‘%?ce’, on the other hand, refers to any job containing the string ‘ce’ in its command line. If the prefix or substring matches more than one job, Bash reports an error.

Simply naming a job can be used to bring it into the foreground: ‘%1’ is a synonym for ‘fg %1’, bringing job 1 from the background into the foreground. Similarly, ‘%1 &’ resumes job 1 in the background, equivalent to ‘bg %1

The shell learns immediately whenever a job changes state. Normally, Bash waits until it is about to print a prompt before reporting changes in a job's status so as to not interrupt any other output. If the -b option to the set builtin is enabled, Bash reports such changes immediately (see The Set Builtin). Any trap on SIGCHLD is executed for each child process that exits.

If an attempt to exit Bash is made while jobs are stopped, the shell prints a message warning that there are stopped jobs. The jobs command may then be used to inspect their status. If a second attempt to exit is made without an intervening command, Bash does not print another warning, and the stopped jobs are terminated.


Next: , Previous: Job Control Basics, Up: Job Control

7.2 Job Control Builtins

bg
          bg [jobspec ...]

Resume each suspended job jobspec in the background, as if it had been started with ‘&’. If jobspec is not supplied, the current job is used. The return status is zero unless it is run when job control is not enabled, or, when run with job control enabled, any jobspec was not found or specifies a job that was started without job control.

fg
          fg [jobspec]

Resume the job jobspec in the foreground and make it the current job. If jobspec is not supplied, the current job is used. The return status is that of the command placed into the foreground, or non-zero if run when job control is disabled or, when run with job control enabled, jobspec does not specify a valid job or jobspec specifies a job that was started without job control.

jobs
          jobs [-lnprs] [jobspec]
          jobs -x command [arguments]

The first form lists the active jobs. The options have the following meanings:

-l
List process ids in addition to the normal information.
-n
Display information only about jobs that have changed status since the user was last notified of their status.
-p
List only the process id of the job's process group leader.
-r
Restrict output to running jobs.
-s
Restrict output to stopped jobs.

If jobspec is given, output is restricted to information about that job. If jobspec is not supplied, the status of all jobs is listed.

If the -x option is supplied, jobs replaces any jobspec found in command or arguments with the corresponding process group id, and executes command, passing it arguments, returning its exit status.

kill
          kill [-s sigspec] [-n signum] [-sigspec] jobspec or pid
          kill -l [exit_status]

Send a signal specified by sigspec or signum to the process named by job specification jobspec or process id pid. sigspec is either a case-insensitive signal name such as SIGINT (with or without the SIG prefix) or a signal number; signum is a signal number. If sigspec and signum are not present, SIGTERM is used. The -l option lists the signal names. If any arguments are supplied when -l is given, the names of the signals corresponding to the arguments are listed, and the return status is zero. exit_status is a number specifying a signal number or the exit status of a process terminated by a signal. The return status is zero if at least one signal was successfully sent, or non-zero if an error occurs or an invalid option is encountered.

wait
          wait [jobspec or pid ...]

Wait until the child process specified by each process id pid or job specification jobspec exits and return the exit status of the last command waited for. If a job spec is given, all processes in the job are waited for. If no arguments are given, all currently active child processes are waited for, and the return status is zero. If neither jobspec nor pid specifies an active child process of the shell, the return status is 127.

disown
          disown [-ar] [-h] [jobspec ...]

Without options, each jobspec is removed from the table of active jobs. If the -h option is given, the job is not removed from the table, but is marked so that SIGHUP is not sent to the job if the shell receives a SIGHUP. If jobspec is not present, and neither the -a nor -r option is supplied, the current job is used. If no jobspec is supplied, the -a option means to remove or mark all jobs; the -r option without a jobspec argument restricts operation to running jobs.

suspend
          suspend [-f]

Suspend the execution of this shell until it receives a SIGCONT signal. The -f option means to suspend even if the shell is a login shell.

When job control is not active, the kill and wait builtins do not accept jobspec arguments. They must be supplied process ids.


Previous: Job Control Builtins, Up: Job Control

7.3 Job Control Variables

auto_resume
This variable controls how the shell interacts with the user and job control. If this variable exists then single word simple commands without redirections are treated as candidates for resumption of an existing job. There is no ambiguity allowed; if there is more than one job beginning with the string typed, then the most recently accessed job will be selected. The name of a stopped job, in this context, is the command line used to start it. If this variable is set to the value ‘exact’, the string supplied must match the name of a stopped job exactly; if set to ‘substring’, the string supplied needs to match a substring of the name of a stopped job. The ‘substring’ value provides functionality analogous to the ‘%?’ job id (see Job Control Basics). If set to any other value, the supplied string must be a prefix of a stopped job's name; this provides functionality analogous to the ‘%’ job id.


Next: , Previous: Using History Interactively, Up: Top

8 Command Line Editing

This chapter describes the basic features of the gnu command line editing interface. Command line editing is provided by the Readline library, which is used by several different programs, including Bash.


Next: , Up: Command Line Editing

8.1 Introduction to Line Editing

The following paragraphs describe the notation used to represent keystrokes.

The text C-k is read as `Control-K' and describes the character produced when the <k> key is pressed while the Control key is depressed.

The text M-k is read as `Meta-K' and describes the character produced when the Meta key (if you have one) is depressed, and the <k> key is pressed. The Meta key is labeled <ALT> on many keyboards. On keyboards with two keys labeled <ALT> (usually to either side of the space bar), the <ALT> on the left side is generally set to work as a Meta key. The <ALT> key on the right may also be configured to work as a Meta key or may be configured as some other modifier, such as a Compose key for typing accented characters.

If you do not have a Meta or <ALT> key, or another key working as a Meta key, the identical keystroke can be generated by typing <ESC> first, and then typing <k>. Either process is known as metafying the <k> key.

The text M-C-k is read as `Meta-Control-k' and describes the character produced by metafying C-k.

In addition, several keys have their own names. Specifically, <DEL>, <ESC>, <LFD>, <SPC>, <RET>, and <TAB> all stand for themselves when seen in this text, or in an init file (see Readline Init File). If your keyboard lacks a <LFD> key, typing <C-j> will produce the desired character. The <RET> key may be labeled <Return> or <Enter> on some keyboards.


Next: , Previous: Introduction and Notation, Up: Command Line Editing

8.2 Readline Interaction

Often during an interactive session you type in a long line of text, only to notice that the first word on the line is misspelled. The Readline library gives you a set of commands for manipulating the text as you type it in, allowing you to just fix your typo, and not forcing you to retype the majority of the line. Using these editing commands, you move the cursor to the place that needs correction, and delete or insert the text of the corrections. Then, when you are satisfied with the line, you simply press <RET>. You do not have to be at the end of the line to press <RET>; the entire line is accepted regardless of the location of the cursor within the line.


Next: , Up: Readline Interaction

8.2.1 Readline Bare Essentials

In order to enter characters into the line, simply type them. The typed character appears where the cursor was, and then the cursor moves one space to the right. If you mistype a character, you can use your erase character to back up and delete the mistyped character.

Sometimes you may mistype a character, and not notice the error until you have typed several other characters. In that case, you can type C-b to move the cursor to the left, and then correct your mistake. Afterwards, you can move the cursor to the right with C-f.

When you add text in the middle of a line, you will notice that characters to the right of the cursor are `pushed over' to make room for the text that you have inserted. Likewise, when you delete text behind the cursor, characters to the right of the cursor are `pulled back' to fill in the blank space created by the removal of the text. A list of the bare essentials for editing the text of an input line follows.

C-b
Move back one character.
C-f
Move forward one character.
<DEL> or <Backspace>
Delete the character to the left of the cursor.
C-d
Delete the character underneath the cursor.
Printing characters
Insert the character into the line at the cursor.
C-_ or C-x C-u
Undo the last editing command. You can undo all the way back to an empty line.

(Depending on your configuration, the <Backspace> key be set to delete the character to the left of the cursor and the <DEL> key set to delete the character underneath the cursor, like C-d, rather than the character to the left of the cursor.)


Next: , Previous: Readline Bare Essentials, Up: Readline Interaction

8.2.2 Readline Movement Commands

The above table describes the most basic keystrokes that you need in order to do editing of the input line. For your convenience, many other commands have been added in addition to C-b, C-f, C-d, and <DEL>. Here are some commands for moving more rapidly about the line.

C-a
Move to the start of the line.
C-e
Move to the end of the line.
M-f
Move forward a word, where a word is composed of letters and digits.
M-b
Move backward a word.
C-l
Clear the screen, reprinting the current line at the top.

Notice how C-f moves forward a character, while M-f moves forward a word. It is a loose convention that control keystrokes operate on characters while meta keystrokes operate on words.


Next: , Previous: Readline Movement Commands, Up: Readline Interaction

8.2.3 Readline Killing Commands

Killing text means to delete the text from the line, but to save it away for later use, usually by yanking (re-inserting) it back into the line. (`Cut' and `paste' are more recent jargon for `kill' and `yank'.)

If the description for a command says that it `kills' text, then you can be sure that you can get the text back in a different (or the same) place later.

When you use a kill command, the text is saved in a kill-ring. Any number of consecutive kills save all of the killed text together, so that when you yank it back, you get it all. The kill ring is not line specific; the text that you killed on a previously typed line is available to be yanked back later, when you are typing another line. Here is the list of commands for killing text.

C-k
Kill the text from the current cursor position to the end of the line.
M-d
Kill from the cursor to the end of the current word, or, if between words, to the end of the next word. Word boundaries are the same as those used by M-f.
M-<DEL>
Kill from the cursor the start of the current word, or, if between words, to the start of the previous word. Word boundaries are the same as those used by M-b.
C-w
Kill from the cursor to the previous whitespace. This is different than M-<DEL> because the word boundaries differ.

Here is how to yank the text back into the line. Yanking means to copy the most-recently-killed text from the kill buffer.

C-y
Yank the most recently killed text back into the buffer at the cursor.
M-y
Rotate the kill-ring, and yank the new top. You can only do this if the prior command is C-y or M-y.


Next: , Previous: Readline Killing Commands, Up: Readline Interaction

8.2.4 Readline Arguments

You can pass numeric arguments to Readline commands. Sometimes the argument acts as a repeat count, other times it is the sign of the argument that is significant. If you pass a negative argument to a command which normally acts in a forward direction, that command will act in a backward direction. For example, to kill text back to the start of the line, you might type ‘M-- C-k’.

The general way to pass numeric arguments to a command is to type meta digits before the command. If the first `digit' typed is a minus sign (‘-’), then the sign of the argument will be negative. Once you have typed one meta digit to get the argument started, you can type the remainder of the digits, and then the command. For example, to give the C-d command an argument of 10, you could type ‘M-1 0 C-d’, which will delete the next ten characters on the input line.


Previous: Readline Arguments, Up: Readline Interaction

8.2.5 Searching for Commands in the History

Readline provides commands for searching through the command history (see Bash History Facilities) for lines containing a specified string. There are two search modes: incremental and non-incremental.

Incremental searches begin before the user has finished typing the search string. As each character of the search string is typed, Readline displays the next entry from the history matching the string typed so far. An incremental search requires only as many characters as needed to find the desired history entry. To search backward in the history for a particular string, type C-r. Typing C-s searches forward through the history. The characters present in the value of the isearch-terminators variable are used to terminate an incremental search. If that variable has not been assigned a value, the <ESC> and C-J characters will terminate an incremental search. C-g will abort an incremental search and restore the original line. When the search is terminated, the history entry containing the search string becomes the current line.

To find other matching entries in the history list, type C-r or C-s as appropriate. This will search backward or forward in the history for the next entry matching the search string typed so far. Any other key sequence bound to a Readline command will terminate the search and execute that command. For instance, a <RET> will terminate the search and accept the line, thereby executing the command from the history list. A movement command will terminate the search, make the last line found the current line, and begin editing.

Readline remembers the last incremental search string. If two C-rs are typed without any intervening characters defining a new search string, any remembered search string is used.

Non-incremental searches read the entire search string before starting to search for matching history lines. The search string may be typed by the user or be part of the contents of the current line.


Next: , Previous: Readline Interaction, Up: Command Line Editing

8.3 Readline Init File

Although the Readline library comes with a set of Emacs-like keybindings installed by default, it is possible to use a different set of keybindings. Any user can customize programs that use Readline by putting commands in an inputrc file, conventionally in his home directory. The name of this file is taken from the value of the shell variable INPUTRC. If that variable is unset, the default is ~/.inputrc. If that file does not exist or cannot be read, the ultimate default is /etc/inputrc.

When a program which uses the Readline library starts up, the init file is read, and the key bindings are set.

In addition, the C-x C-r command re-reads this init file, thus incorporating any changes that you might have made to it.


Next: , Up: Readline Init File

8.3.1 Readline Init File Syntax

There are only a few basic constructs allowed in the Readline init file. Blank lines are ignored. Lines beginning with a ‘#’ are comments. Lines beginning with a ‘$’ indicate conditional constructs (see Conditional Init Constructs). Other lines denote variable settings and key bindings.

Variable Settings
You can modify the run-time behavior of Readline by altering the values of variables in Readline using the set command within the init file. The syntax is simple:
          set variable value

Here, for example, is how to change from the default Emacs-like key binding to use vi line editing commands:

          set editing-mode vi

Variable names and values, where appropriate, are recognized without regard to case. Unrecognized variable names are ignored.

Boolean variables (those that can be set to on or off) are set to on if the value is null or empty, on (case-insensitive), or 1. Any other value results in the variable being set to off.

The bind -V command lists the current Readline variable names and values. See Bash Builtins.

A great deal of run-time behavior is changeable with the following variables.

bell-style
Controls what happens when Readline wants to ring the terminal bell. If set to ‘none’, Readline never rings the bell. If set to ‘visible’, Readline uses a visible bell if one is available. If set to ‘audible’ (the default), Readline attempts to ring the terminal's bell.
bind-tty-special-chars
If set to ‘on’, Readline attempts to bind the control characters treated specially by the kernel's terminal driver to their Readline equivalents.
comment-begin
The string to insert at the beginning of the line when the insert-comment command is executed. The default value is "#".
completion-ignore-case
If set to ‘on’, Readline performs filename matching and completion in a case-insensitive fashion. The default value is ‘off’.
completion-query-items
The number of possible completions that determines when the user is asked whether the list of possibilities should be displayed. If the number of possible completions is greater than this value, Readline will ask the user whether or not he wishes to view them; otherwise, they are simply listed. This variable must be set to an integer value greater than or equal to 0. A negative value means Readline should never ask. The default limit is 100.
convert-meta
If set to ‘on’, Readline will convert characters with the eighth bit set to an ascii key sequence by stripping the eighth bit and prefixing an <ESC> character, converting them to a meta-prefixed key sequence. The default value is ‘on’.
disable-completion
If set to ‘On’, Readline will inhibit word completion. Completion characters will be inserted into the line as if they had been mapped to self-insert. The default is ‘off’.
editing-mode
The editing-mode variable controls which default set of key bindings is used. By default, Readline starts up in Emacs editing mode, where the keystrokes are most similar to Emacs. This variable can be set to either ‘emacs’ or ‘vi’.
enable-keypad
When set to ‘on’, Readline will try to enable the application keypad when it is called. Some systems need this to enable the arrow keys. The default is ‘off’.
expand-tilde
If set to ‘on’, tilde expansion is performed when Readline attempts word completion. The default is ‘off’.
history-preserve-point
If set to ‘on’, the history code attempts to place point at the same location on each history line retrieved with previous-history or next-history. The default is ‘off’.
horizontal-scroll-mode
This variable can be set to either ‘on’ or ‘off’. Setting it to ‘on’ means that the text of the lines being edited will scroll horizontally on a single screen line when they are longer than the width of the screen, instead of wrapping onto a new screen line. By default, this variable is set to ‘off’.
input-meta
If set to ‘on’, Readline will enable eight-bit input (it will not clear the eighth bit in the characters it reads), regardless of what the terminal claims it can support. The default value is ‘off’. The name meta-flag is a synonym for this variable.
isearch-terminators
The string of characters that should terminate an incremental search without subsequently executing the character as a command (see Searching). If this variable has not been given a value, the characters <ESC> and C-J will terminate an incremental search.
keymap
Sets Readline's idea of the current keymap for key binding commands. Acceptable keymap names are emacs, emacs-standard, emacs-meta, emacs-ctlx, vi, vi-move, vi-command, and vi-insert. vi is equivalent to vi-command; emacs is equivalent to emacs-standard. The default value is emacs. The value of the editing-mode variable also affects the default keymap.
mark-directories
If set to ‘on’, completed directory names have a slash appended. The default is ‘on’.
mark-modified-lines
This variable, when set to ‘on’, causes Readline to display an asterisk (‘*’) at the start of history lines which have been modified. This variable is ‘off’ by default.
mark-symlinked-directories
If set to ‘on’, completed names which are symbolic links to directories have a slash appended (subject to the value of mark-directories). The default is ‘off’.
match-hidden-files
This variable, when set to ‘on’, causes Readline to match files whose names begin with a ‘.’ (hidden files) when performing filename completion, unless the leading ‘.’ is supplied by the user in the filename to be completed. This variable is ‘on’ by default.
output-meta
If set to ‘on’, Readline will display characters with the eighth bit set directly rather than as a meta-prefixed escape sequence. The default is ‘off’.
page-completions
If set to ‘on’, Readline uses an internal more-like pager to display a screenful of possible completions at a time. This variable is ‘on’ by default.
print-completions-horizontally
If set to ‘on’, Readline will display completions with matches sorted horizontally in alphabetical order, rather than down the screen. The default is ‘off’.
show-all-if-ambiguous
This alters the default behavior of the completion functions. If set to ‘on’, words which have more than one possible completion cause the matches to be listed immediately instead of ringing the bell. The default value is ‘off’.
show-all-if-unmodified
This alters the default behavior of the completion functions in a fashion similar to show-all-if-ambiguous. If set to ‘on’, words which have more than one possible completion without any possible partial completion (the possible completions don't share a common prefix) cause the matches to be listed immediately instead of ringing the bell. The default value is ‘off’.
visible-stats
If set to ‘on’, a character denoting a file's type is appended to the filename when listing possible completions. The default is ‘off’.

Key Bindings
The syntax for controlling key bindings in the init file is simple. First you need to find the name of the command that you want to change. The following sections contain tables of the command name, the default keybinding, if any, and a short description of what the command does.

Once you know the name of the command, simply place on a line in the init file the name of the key you wish to bind the command to, a colon, and then the name of the command. There can be no space between the key name and the colon – that will be interpreted as part of the key name. The name of the key can be expressed in different ways, depending on what you find most comfortable.

In addition to command names, readline allows keys to be bound to a string that is inserted when the key is pressed (a macro).

The bind -p command displays Readline function names and bindings in a format that can put directly into an initialization file. See Bash Builtins.

keynamefunction-name or macro
keyname is the name of a key spelled out in English. For example:
               Control-u: universal-argument
               Meta-Rubout: backward-kill-word
               Control-o: "> output"

In the above example, C-u is bound to the function universal-argument, M-DEL is bound to the function backward-kill-word, and C-o is bound to run the macro expressed on the right hand side (that is, to insert the text ‘> output’ into the line).

A number of symbolic character names are recognized while processing this key binding syntax: DEL, ESC, ESCAPE, LFD, NEWLINE, RET, RETURN, RUBOUT, SPACE, SPC, and TAB.

"keyseq": function-name or macro
keyseq differs from keyname above in that strings denoting an entire key sequence can be specified, by placing the key sequence in double quotes. Some gnu Emacs style key escapes can be used, as in the following example, but the special character names are not recognized.
               "\C-u": universal-argument
               "\C-x\C-r": re-read-init-file
               "\e[11~": "Function Key 1"

In the above example, C-u is again bound to the function universal-argument (just as it was in the first example), ‘C-x C-r’ is bound to the function re-read-init-file, and ‘<ESC> <[> <1> <1> <~>’ is bound to insert the text ‘Function Key 1’.

The following gnu Emacs style escape sequences are available when specifying key sequences:

\C-
control prefix
\M-
meta prefix
\e
an escape character
\\
backslash
\"
<">, a double quotation mark
\'
<'>, a single quote or apostrophe

In addition to the gnu Emacs style escape sequences, a second set of backslash escapes is available:

\a
alert (bell)
\b
backspace
\d
delete
\f
form feed
\n
newline
\r
carriage return
\t
horizontal tab
\v
vertical tab
\nnn
the eight-bit character whose value is the octal value nnn (one to three digits)
\xHH
the eight-bit character whose value is the hexadecimal value HH (one or two hex digits)

When entering the text of a macro, single or double quotes must be used to indicate a macro definition. Unquoted text is assumed to be a function name. In the macro body, the backslash escapes described above are expanded. Backslash will quote any other character in the macro text, including ‘"’ and ‘'’. For example, the following binding will make ‘C-x \’ insert a single ‘\’ into the line:

          "\C-x\\": "\\"


Next: , Previous: Readline Init File Syntax, Up: Readline Init File

8.3.2 Conditional Init Constructs

Readline implements a facility similar in spirit to the conditional compilation features of the C preprocessor which allows key bindings and variable settings to be performed as the result of tests. There are four parser directives used.

$if
The $if construct allows bindings to be made based on the editing mode, the terminal being used, or the application using Readline. The text of the test extends to the end of the line; no characters are required to isolate it.
mode
The mode= form of the $if directive is used to test whether Readline is in emacs or vi mode. This may be used in conjunction with the ‘set keymap’ command, for instance, to set bindings in the emacs-standard and emacs-ctlx keymaps only if Readline is starting out in emacs mode.
term
The term= form may be used to include terminal-specific key bindings, perhaps to bind the key sequences output by the terminal's function keys. The word on the right side of the ‘=’ is tested against both the full name of the terminal and the portion of the terminal name before the first ‘-’. This allows sun to match both sun and sun-cmd, for instance.
application
The application construct is used to include application-specific settings. Each program using the Readline library sets the application name, and you can test for a particular value. This could be used to bind key sequences to functions useful for a specific program. For instance, the following command adds a key sequence that quotes the current or previous word in Bash:
               $if Bash
               # Quote the current or previous word
               "\C-xq": "\eb\"\ef\""
               $endif

$endif
This command, as seen in the previous example, terminates an $if command.
$else
Commands in this branch of the $if directive are executed if the test fails.
$include
This directive takes a single filename as an argument and reads commands and bindings from that file. For example, the following directive reads from /etc/inputrc:
          $include /etc/inputrc


Previous: Conditional Init Constructs, Up: Readline Init File

8.3.3 Sample Init File

Here is an example of an inputrc file. This illustrates key binding, variable assignment, and conditional syntax.

     
     # This file controls the behaviour of line input editing for
     # programs that use the GNU Readline library.  Existing
     # programs include FTP, Bash, and GDB.
     #
     # You can re-read the inputrc file with C-x C-r.
     # Lines beginning with '#' are comments.
     #
     # First, include any systemwide bindings and variable
     # assignments from /etc/Inputrc
     $include /etc/Inputrc
     
     #
     # Set various bindings for emacs mode.
     
     set editing-mode emacs
     
     $if mode=emacs
     
     Meta-Control-h:	backward-kill-word	Text after the function name is ignored
     
     #
     # Arrow keys in keypad mode
     #
     #"\M-OD":        backward-char
     #"\M-OC":        forward-char
     #"\M-OA":        previous-history
     #"\M-OB":        next-history
     #
     # Arrow keys in ANSI mode
     #
     "\M-[D":        backward-char
     "\M-[C":        forward-char
     "\M-[A":        previous-history
     "\M-[B":        next-history
     #
     # Arrow keys in 8 bit keypad mode
     #
     #"\M-\C-OD":       backward-char
     #"\M-\C-OC":       forward-char
     #"\M-\C-OA":       previous-history
     #"\M-\C-OB":       next-history
     #
     # Arrow keys in 8 bit ANSI mode
     #
     #"\M-\C-[D":       backward-char
     #"\M-\C-[C":       forward-char
     #"\M-\C-[A":       previous-history
     #"\M-\C-[B":       next-history
     
     C-q: quoted-insert
     
     $endif
     
     # An old-style binding.  This happens to be the default.
     TAB: complete
     
     # Macros that are convenient for shell interaction
     $if Bash
     # edit the path
     "\C-xp": "PATH=${PATH}\e\C-e\C-a\ef\C-f"
     # prepare to type a quoted word --
     # insert open and close double quotes
     # and move to just after the open quote
     "\C-x\"": "\"\"\C-b"
     # insert a backslash (testing backslash escapes
     # in sequences and macros)
     "\C-x\\": "\\"
     # Quote the current or previous word
     "\C-xq": "\eb\"\ef\""
     # Add a binding to refresh the line, which is unbound
     "\C-xr": redraw-current-line
     # Edit variable on current line.
     "\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y="
     $endif
     
     # use a visible bell if one is available
     set bell-style visible
     
     # don't strip characters to 7 bits when reading
     set input-meta on
     
     # allow iso-latin1 characters to be inserted rather
     # than converted to prefix-meta sequences
     set convert-meta off
     
     # display characters with the eighth bit set directly
     # rather than as meta-prefixed characters
     set output-meta on
     
     # if there are more than 150 possible completions for
     # a word, ask the user if he wants to see all of them
     set completion-query-items 150
     
     # For FTP
     $if Ftp
     "\C-xg": "get \M-?"
     "\C-xt": "put \M-?"
     "\M-.": yank-last-arg
     $endif


Next: , Previous: Readline Init File, Up: Command Line Editing

8.4 Bindable Readline Commands

This section describes Readline commands that may be bound to key sequences. You can list your key bindings by executing bind -P or, for a more terse format, suitable for an inputrc file, bind -p. (See Bash Builtins.) Command names without an accompanying key sequence are unbound by default.

In the following descriptions, point refers to the current cursor position, and mark refers to a cursor position saved by the set-mark command. The text between the point and mark is referred to as the region.


Next: , Up: Bindable Readline Commands

8.4.1 Commands For Moving

beginning-of-line (C-a)
Move to the start of the current line.
end-of-line (C-e)
Move to the end of the line.
forward-char (C-f)
Move forward a character.
backward-char (C-b)
Move back a character.
forward-word (M-f)
Move forward to the end of the next word. Words are composed of letters and digits.
backward-word (M-b)
Move back to the start of the current or previous word. Words are composed of letters and digits.
clear-screen (C-l)
Clear the screen and redraw the current line, leaving the current line at the top of the screen.
redraw-current-line ()
Refresh the current line. By default, this is unbound.


Next: , Previous: Commands For Moving, Up: Bindable Readline Commands

8.4.2 Commands For Manipulating The History

accept-line (Newline or Return)
Accept the line regardless of where the cursor is. If this line is non-empty, add it to the history list according to the setting of the HISTCONTROL and HISTIGNORE variables. If this line is a modified history line, then restore the history line to its original state.
previous-history (C-p)
Move `back' through the history list, fetching the previous command.
next-history (C-n)
Move `forward' through the history list, fetching the next command.
beginning-of-history (M-<)
Move to the first line in the history.
end-of-history (M->)
Move to the end of the input history, i.e., the line currently being entered.
reverse-search-history (C-r)
Search backward starting at the current line and moving `up' through the history as necessary. This is an incremental search.
forward-search-history (C-s)
Search forward starting at the current line and moving `down' through the the history as necessary. This is an incremental search.
non-incremental-reverse-search-history (M-p)
Search backward starting at the current line and moving `up' through the history as necessary using a non-incremental search for a string supplied by the user.
non-incremental-forward-search-history (M-n)
Search forward starting at the current line and moving `down' through the the history as necessary using a non-incremental search for a string supplied by the user.
history-search-forward ()
Search forward through the history for the string of characters between the start of the current line and the point. This is a non-incremental search. By default, this command is unbound.
history-search-backward ()
Search backward through the history for the string of characters between the start of the current line and the point. This is a non-incremental search. By default, this command is unbound.
yank-nth-arg (M-C-y)
Insert the first argument to the previous command (usually the second word on the previous line) at point. With an argument n, insert the nth word from the previous command (the words in the previous command begin with word 0). A negative argument inserts the nth word from the end of the previous command. Once the argument n is computed, the argument is extracted as if the ‘!n’ history expansion had been specified.
yank-last-arg (M-. or M-_)
Insert last argument to the previous command (the last word of the previous history entry). With an argument, behave exactly like yank-nth-arg. Successive calls to yank-last-arg move back through the history list, inserting the last argument of each line in turn. The history expansion facilities are used to extract the last argument, as if the ‘!$’ history expansion had been specified.


Next: , Previous: Commands For History, Up: Bindable Readline Commands

8.4.3 Commands For Changing Text

delete-char (C-d)
Delete the character at point. If point is at the beginning of the line, there are no characters in the line, and the last character typed was not bound to delete-char, then return eof.
backward-delete-char (Rubout)
Delete the character behind the cursor. A numeric argument means to kill the characters instead of deleting them.
forward-backward-delete-char ()
Delete the character under the cursor, unless the cursor is at the end of the line, in which case the character behind the cursor is deleted. By default, this is not bound to a key.
quoted-insert (C-q or C-v)
Add the next character typed to the line verbatim. This is how to insert key sequences like C-q, for example.
self-insert (a, b, A, 1, !, ...)
Insert yourself.
transpose-chars (C-t)
Drag the character before the cursor forward over the character at the cursor, moving the cursor forward as well. If the insertion point is at the end of the line, then this transposes the last two characters of the line. Negative arguments have no effect.
transpose-words (M-t)
Drag the word before point past the word after point, moving point past that word as well. If the insertion point is at the end of the line, this transposes the last two words on the line.
upcase-word (M-u)
Uppercase the current (or following) word. With a negative argument, uppercase the previous word, but do not move the cursor.
downcase-word (M-l)
Lowercase the current (or following) word. With a negative argument, lowercase the previous word, but do not move the cursor.
capitalize-word (M-c)
Capitalize the current (or following) word. With a negative argument, capitalize the previous word, but do not move the cursor.
overwrite-mode ()
Toggle overwrite mode. With an explicit positive numeric argument, switches to overwrite mode. With an explicit non-positive numeric argument, switches to insert mode. This command affects only emacs mode; vi mode does overwrite differently. Each call to readline() starts in insert mode.

In overwrite mode, characters bound to self-insert replace the text at point rather than pushing the text to the right. Characters bound to backward-delete-char replace the character before point with a space.

By default, this command is unbound.


Next: , Previous: Commands For Text, Up: Bindable Readline Commands

8.4.4 Killing And Yanking

kill-line (C-k)
Kill the text from point to the end of the line.
backward-kill-line (C-x Rubout)
Kill backward to the beginning of the line.
unix-line-discard (C-u)
Kill backward from the cursor to the beginning of the current line.
kill-whole-line ()
Kill all characters on the current line, no matter where point is. By default, this is unbound.
kill-word (M-d)
Kill from point to the end of the current word, or if between words, to the end of the next word. Word boundaries are the same as forward-word.
backward-kill-word (M-<DEL>)
Kill the word behind point. Word boundaries are the same as backward-word.
unix-word-rubout (C-w)
Kill the word behind point, using white space as a word boundary. The killed text is saved on the kill-ring.
unix-filename-rubout ()
Kill the word behind point, using white space and the slash character as the word boundaries. The killed text is saved on the kill-ring.
delete-horizontal-space ()
Delete all spaces and tabs around point. By default, this is unbound.
kill-region ()
Kill the text in the current region. By default, this command is unbound.
copy-region-as-kill ()
Copy the text in the region to the kill buffer, so it can be yanked right away. By default, this command is unbound.
copy-backward-word ()
Copy the word before point to the kill buffer. The word boundaries are the same as backward-word. By default, this command is unbound.
copy-forward-word ()
Copy the word following point to the kill buffer. The word boundaries are the same as forward-word. By default, this command is unbound.
yank (C-y)
Yank the top of the kill ring into the buffer at point.
yank-pop (M-y)
Rotate the kill-ring, and yank the new top. You can only do this if the prior command is yank or yank-pop.


Next: , Previous: Commands For Killing, Up: Bindable Readline Commands

8.4.5 Specifying Numeric Arguments

digit-argument (M-0, M-1, ... M--)
Add this digit to the argument already accumulating, or start a new argument. M-- starts a negative argument.
universal-argument ()
This is another way to specify an argument. If this command is followed by one or more digits, optionally with a leading minus sign, those digits define the argument. If the command is followed by digits, executing universal-argument again ends the numeric argument, but is otherwise ignored. As a special case, if this command is immediately followed by a character that is neither a digit or minus sign, the argument count for the next command is multiplied by four. The argument count is initially one, so executing this function the first time makes the argument count four, a second time makes the argument count sixteen, and so on. By default, this is not bound to a key.


Next: , Previous: Numeric Arguments, Up: Bindable Readline Commands

8.4.6 Letting Readline Type For You

complete (<TAB>)
Attempt to perform completion on the text before point. The actual completion performed is application-specific. Bash attempts completion treating the text as a variable (if the text begins with ‘$’), username (if the text begins with ‘~’), hostname (if the text begins with ‘@’), or command (including aliases and functions) in turn. If none of these produces a match, filename completion is attempted.
possible-completions (M-?)
List the possible completions of the text before point.
insert-completions (M-*)
Insert all completions of the text before point that would have been generated by possible-completions.
menu-complete ()
Similar to complete, but replaces the word to be completed with a single match from the list of possible completions. Repeated execution of menu-complete steps through the list of possible completions, inserting each match in turn. At the end of the list of completions, the bell is rung (subject to the setting of bell-style) and the original text is restored. An argument of n moves n positions forward in the list of matches; a negative argument may be used to move backward through the list. This command is intended to be bound to <TAB>, but is unbound by default.
delete-char-or-list ()
Deletes the character under the cursor if not at the beginning or end of the line (like delete-char). If at the end of the line, behaves identically to possible-completions. This command is unbound by default.
complete-filename (M-/)
Attempt filename completion on the text before point.
possible-filename-completions (C-x /)
List the possible completions of the text before point, treating it as a filename.
complete-username (M-~)
Attempt completion on the text before point, treating it as a username.
possible-username-completions (C-x ~)
List the possible completions of the text before point, treating it as a username.
complete-variable (M-$)
Attempt completion on the text before point, treating it as a shell variable.
possible-variable-completions (C-x $)
List the possible completions of the text before point, treating it as a shell variable.
complete-hostname (M-@)
Attempt completion on the text before point, treating it as a hostname.
possible-hostname-completions (C-x @)
List the possible completions of the text before point, treating it as a hostname.
complete-command (M-!)
Attempt completion on the text before point, treating it as a command name. Command completion attempts to match the text against aliases, reserved words, shell functions, shell builtins, and finally executable filenames, in that order.
possible-command-completions (C-x !)
List the possible completions of the text before point, treating it as a command name.
dynamic-complete-history (M-<TAB>)
Attempt completion on the text before point, comparing the text against lines from the history list for possible completion matches.
complete-into-braces (M-{)
Perform filename completion and insert the list of possible completions enclosed within braces so the list is available to the shell (see Brace Expansion).


Next: , Previous: Commands For Completion, Up: Bindable Readline Commands

8.4.7 Keyboard Macros

start-kbd-macro (C-x ()
Begin saving the characters typed into the current keyboard macro.
end-kbd-macro (C-x ))
Stop saving the characters typed into the current keyboard macro and save the definition.
call-last-kbd-macro (C-x e)
Re-execute the last keyboard macro defined, by making the characters in the macro appear as if typed at the keyboard.


Previous: Keyboard Macros, Up: Bindable Readline Commands

8.4.8 Some Miscellaneous Commands

re-read-init-file (C-x C-r)
Read in the contents of the inputrc file, and incorporate any bindings or variable assignments found there.
abort (C-g)
Abort the current editing command and ring the terminal's bell (subject to the setting of bell-style).
do-uppercase-version (M-a, M-b, M-x, ...)
If the metafied character x is lowercase, run the command that is bound to the corresponding uppercase character.
prefix-meta (<ESC>)
Metafy the next character typed. This is for keyboards without a meta key. Typing ‘<ESC> f’ is equivalent to typing M-f.
undo (C-_ or C-x C-u)
Incremental undo, separately remembered for each line.
revert-line (M-r)
Undo all changes made to this line. This is like executing the undo command enough times to get back to the beginning.
tilde-expand (M-&)
Perform tilde expansion on the current word.
set-mark (C-@)
Set the mark to the point. If a numeric argument is supplied, the mark is set to that position.
exchange-point-and-mark (C-x C-x)
Swap the point with the mark. The current cursor position is set to the saved position, and the old cursor position is saved as the mark.
character-search (C-])
A character is read and point is moved to the next occurrence of that character. A negative count searches for previous occurrences.
character-search-backward (M-C-])
A character is read and point is moved to the previous occurrence of that character. A negative count searches for subsequent occurrences.
insert-comment (M-#)
Without a numeric argument, the value of the comment-begin variable is inserted at the beginning of the current line. If a numeric argument is supplied, this command acts as a toggle: if the characters at the beginning of the line do not match the value of comment-begin, the value is inserted, otherwise the characters in comment-begin are deleted from the beginning of the line. In either case, the line is accepted as if a newline had been typed. The default value of comment-begin causes this command to make the current line a shell comment. If a numeric argument causes the comment character to be removed, the line will be executed by the shell.
dump-functions ()
Print all of the functions and their key bindings to the Readline output stream. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.
dump-variables ()
Print all of the settable variables and their values to the Readline output stream. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.
dump-macros ()
Print all of the Readline key sequences bound to macros and the strings they output. If a numeric argument is supplied, the output is formatted in such a way that it can be made part of an inputrc file. This command is unbound by default.
glob-complete-word (M-g)
The word before point is treated as a pattern for pathname expansion, with an asterisk implicitly appended. This pattern is used to generate a list of matching file names for possible completions.
glob-expand-word (C-x *)
The word before point is treated as a pattern for pathname expansion, and the list of matching file names is inserted, replacing the word. If a numeric argument is supplied, a ‘*’ is appended before pathname expansion.
glob-list-expansions (C-x g)
The list of expansions that would have been generated by glob-expand-word is displayed, and the line is redrawn. If a numeric argument is supplied, a ‘*’ is appended before pathname expansion.
display-shell-version (C-x C-v)
Display version information about the current instance of Bash.
shell-expand-line (M-C-e)
Expand the line as the shell does. This performs alias and history expansion as well as all of the shell word expansions (see Shell Expansions).
history-expand-line (M-^)
Perform history expansion on the current line.
magic-space ()
Perform history expansion on the current line and insert a space (see History Interaction).
alias-expand-line ()
Perform alias expansion on the current line (see Aliases).
history-and-alias-expand-line ()
Perform history and alias expansion on the current line.
insert-last-argument (M-. or M-_)
A synonym for yank-last-arg.
operate-and-get-next (C-o)
Accept the current line for execution and fetch the next line relative to the current line from the history for editing. Any argument is ignored.
edit-and-execute-command (C-xC-e)
Invoke an editor on the current command line, and execute the result as shell commands. Bash attempts to invoke $VISUAL, $EDITOR, and emacs as the editor, in that order.


Next: , Previous: Bindable Readline Commands, Up: Command Line Editing

8.5 Readline vi Mode

While the Readline library does not have a full set of vi editing functions, it does contain enough to allow simple editing of the line. The Readline vi mode behaves as specified in the posix 1003.2 standard.

In order to switch interactively between emacs and vi editing modes, use the ‘set -o emacs’ and ‘set -o vi’ commands (see The Set Builtin). The Readline default is emacs mode.

When you enter a line in vi mode, you are already placed in `insertion' mode, as if you had typed an ‘i’. Pressing <ESC> switches you into `command' mode, where you can edit the text of the line with the standard vi movement keys, move to previous history lines with ‘k’ and subsequent lines with ‘j’, and so forth.


Next: , Previous: Readline vi Mode, Up: Command Line Editing

8.6 Programmable Completion

When word completion is attempted for an argument to a command for which a completion specification (a compspec) has been defined using the complete builtin (see Programmable Completion Builtins), the programmable completion facilities are invoked.

First, the command name is identified. If a compspec has been defined for that command, the compspec is used to generate the list of possible completions for the word. If the command word is a full pathname, a compspec for the full pathname is searched for first. If no compspec is found for the full pathname, an attempt is made to find a compspec for the portion following the final slash.

Once a compspec has been found, it is used to generate the list of matching words. If a compspec is not found, the default Bash completion described above (see Commands For Completion) is performed.

First, the actions specified by the compspec are used. Only matches which are prefixed by the word being completed are returned. When the -f or -d option is used for filename or directory name completion, the shell variable FIGNORE is used to filter the matches. See Bash Variables, for a description of FIGNORE.

Any completions specified by a filename expansion pattern to the -G option are generated next. The words generated by the pattern need not match the word being completed. The GLOBIGNORE shell variable is not used to filter the matches, but the FIGNORE shell variable is used.

Next, the string specified as the argument to the -W option is considered. The string is first split using the characters in the IFS special variable as delimiters. Shell quoting is honored. Each word is then expanded using brace expansion, tilde expansion, parameter and variable expansion, command substitution, and arithmetic expansion, as described above (see Shell Expansions). The results are split using the rules described above (see Word Splitting). The results of the expansion are prefix-matched against the word being completed, and the matching words become the possible completions.

After these matches have been generated, any shell function or command specified with the -F and -C options is invoked. When the command or function is invoked, the COMP_LINE and COMP_POINT variables are assigned values as described above (see Bash Variables). If a shell function is being invoked, the COMP_WORDS and COMP_CWORD variables are also set. When the function or command is invoked, the first argument is the name of the command whose arguments are being completed, the second argument is the word being completed, and the third argument is the word preceding the word being completed on the current command line. No filtering of the generated completions against the word being completed is performed; the function or command has complete freedom in generating the matches.

Any function specified with -F is invoked first. The function may use any of the shell facilities, including the compgen builtin described below (see Programmable Completion Builtins), to generate the matches. It must put the possible completions in the COMPREPLY array variable.

Next, any command specified with the -C option is invoked in an environment equivalent to command substitution. It should print a list of completions, one per line, to the standard output. Backslash may be used to escape a newline, if necessary.

After all of the possible completions are generated, any filter specified with the -X option is applied to the list. The filter is a pattern as used for pathname expansion; a ‘&’ in the pattern is replaced with the text of the word being completed. A literal ‘&’ may be escaped with a backslash; the backslash is removed before attempting a match. Any completion that matches the pattern will be removed from the list. A leading ‘!’ negates the pattern; in this case any completion not matching the pattern will be removed.

Finally, any prefix and suffix specified with the -P and -S options are added to each member of the completion list, and the result is returned to the Readline completion code as the list of possible completions.

If the previously-applied actions do not generate any matches, and the -o dirnames option was supplied to complete when the compspec was defined, directory name completion is attempted.

If the -o plusdirs option was supplied to complete when the compspec was defined, directory name completion is attempted and any matches are added to the results of the other actions.

By default, if a compspec is found, whatever it generates is returned to the completion code as the full set of possible completions. The default Bash completions are not attempted, and the Readline default of filename completion is disabled. If the -o bashdefault option was supplied to complete when the compspec was defined, the default Bash completions are attempted if the compspec generates no matches. If the -o default option was supplied to complete when the compspec was defined, Readline's default completion will be performed if the compspec (and, if attempted, the default Bash completions) generate no matches.

When a compspec indicates that directory name completion is desired, the programmable completion functions force Readline to append a slash to completed names which are symbolic links to directories, subject to the value of the mark-directories Readline variable, regardless of the setting of the mark-symlinked-directories Readline variable.


Previous: Programmable Completion, Up: Command Line Editing

8.7 Programmable Completion Builtins

Two builtin commands are available to manipulate the programmable completion facilities.

compgen
          compgen [option] [word]

Generate possible completion matches for word according to the options, which may be any option accepted by the complete builtin with the exception of -p and -r, and write the matches to the standard output. When using the -F or -C options, the various shell variables set by the programmable completion facilities, while available, will not have useful values.

The matches will be generated in the same way as if the programmable completion code had generated them directly from a completion specification with the same flags. If word is specified, only those completions matching word will be displayed.

The return value is true unless an invalid option is supplied, or no matches were generated.

complete
          complete [-abcdefgjksuv] [-o comp-option] [-A action] [-G globpat] [-W wordlist]
          [-P prefix] [-S suffix] [-X filterpat] [-F function]
          [-C command] name [name ...]
          complete -pr [name ...]

Specify how arguments to each name should be completed. If the -p option is supplied, or if no options are supplied, existing completion specifications are printed in a way that allows them to be reused as input. The -r option removes a completion specification for each name, or, if no names are supplied, all completion specifications.

The process of applying these completion specifications when word completion is attempted is described above (see Programmable Completion).

Other options, if specified, have the following meanings. The arguments to the -G, -W, and -X options (and, if necessary, the -P and -S options) should be quoted to protect them from expansion before the complete builtin is invoked.

-o comp-option
The comp-option controls several aspects of the compspec's behavior beyond the simple generation of completions. comp-option may be one of:
bashdefault
Perform the rest of the default Bash completions if the compspec generates no matches.
default
Use Readline's default filename completion if the compspec generates no matches.
dirnames
Perform directory name completion if the compspec generates no matches.
filenames
Tell Readline that the compspec generates filenames, so it can perform any filename-specific processing (like adding a slash to directory names or suppressing trailing spaces). This option is intended to be used with shell functions specified with -F.
nospace
Tell Readline not to append a space (the default) to words completed at the end of the line.
plusdirs
After any matches defined by the compspec are generated, directory name completion is attempted and any matches are added to the results of the other actions.

-A action
The action may be one of the following to generate a list of possible completions:
alias
Alias names. May also be specified as -a.
arrayvar
Array variable names.
binding
Readline key binding names (see Bindable Readline Commands).
builtin
Names of shell builtin commands. May also be specified as -b.
command
Command names. May also be specified as -c.
directory
Directory names. May also be specified as -d.
disabled
Names of disabled shell builtins.
enabled
Names of enabled shell builtins.
export
Names of exported shell variables. May also be specified as -e.
file
File names. May also be specified as -f.
function
Names of shell functions.
group
Group names. May also be specified as -g.
helptopic
Help topics as accepted by the help builtin (see Bash Builtins).
hostname
Hostnames, as taken from the file specified by the HOSTFILE shell variable (see Bash Variables).
job
Job names, if job control is active. May also be specified as -j.
keyword
Shell reserved words. May also be specified as -k.
running
Names of running jobs, if job control is active.
service
Service names. May also be specified as -s.
setopt
Valid arguments for the -o option to the set builtin (see The Set Builtin).
shopt
Shell option names as accepted by the shopt builtin (see Bash Builtins).
signal
Signal names.
stopped
Names of stopped jobs, if job control is active.
user
User names. May also be specified as -u.
variable
Names of all shell variables. May also be specified as -v.

-G globpat
The filename expansion pattern globpat is expanded to generate the possible completions.
-W wordlist
The wordlist is split using the characters in the IFS special variable as delimiters, and each resultant word is expanded. The possible completions are the members of the resultant list which match the word being completed.
-C command
command is executed in a subshell environment, and its output is used as the possible completions.
-F function
The shell function function is executed in the current shell environment. When it finishes, the possible completions are retrieved from the value of the COMPREPLY array variable.
-X filterpat
filterpat is a pattern as used for filename expansion. It is applied to the list of possible completions generated by the preceding options and arguments, and each completion matching filterpat is removed from the list. A leading ‘!’ in filterpat negates the pattern; in this case, any completion not matching filterpat is removed.
-P prefix
prefix is added at the beginning of each possible completion after all other options have been applied.
-S suffix
suffix is appended to each possible completion after all other options have been applied.

The return value is true unless an invalid option is supplied, an option other than -p or -r is supplied without a name argument, an attempt is made to remove a completion specification for a name for which no specification exists, or an error occurs adding a completion specification.


Next: , Previous: Job Control, Up: Top

9 Using History Interactively

This chapter describes how to use the gnu History Library interactively, from a user's standpoint. It should be considered a user's guide. For information on using the gnu History Library in other programs, see the gnu Readline Library Manual.


Next: , Up: Using History Interactively

9.1 Bash History Facilities

When the -o history option to the set builtin is enabled (see The Set Builtin), the shell provides access to the command history, the list of commands previously typed. The value of the HISTSIZE shell variable is used as the number of commands to save in a history list. The text of the last $HISTSIZE commands (default 500) is saved. The shell stores each command in the history list prior to parameter and variable expansion but after history expansion is performed, subject to the values of the shell variables HISTIGNORE and HISTCONTROL.

When the shell starts up, the history is initialized from the file named by the HISTFILE variable (default ~/.bash_history). The file named by the value of HISTFILE is truncated, if necessary, to contain no more than the number of lines specified by the value of the HISTFILESIZE variable. When an interactive shell exits, the last $HISTSIZE lines are copied from the history list to the file named by $HISTFILE. If the histappend shell option is set (see Bash Builtins), the lines are appended to the history file, otherwise the history file is overwritten. If HISTFILE is unset, or if the history file is unwritable, the history is not saved. After saving the history, the history file is truncated to contain no more than $HISTFILESIZE lines. If HISTFILESIZE is not set, no truncation is performed.

If the HISTTIMEFORMAT is set, the time stamp information associated with each history entry is written to the history file.

The builtin command fc may be used to list or edit and re-execute a portion of the history list. The history builtin may be used to display or modify the history list and manipulate the history file. When using command-line editing, search commands are available in each editing mode that provide access to the history list (see Commands For History).

The shell allows control over which commands are saved on the history list. The HISTCONTROL and HISTIGNORE variables may be set to cause the shell to save only a subset of the commands entered. The cmdhist shell option, if enabled, causes the shell to attempt to save each line of a multi-line command in the same history entry, adding semicolons where necessary to preserve syntactic correctness. The lithist shell option causes the shell to save the command with embedded newlines instead of semicolons. The shopt builtin is used to set these options. See Bash Builtins, for a description of shopt.


Next: , Previous: Bash History Facilities, Up: Using History Interactively

9.2 Bash History Builtins

Bash provides two builtin commands which manipulate the history list and history file.

fc
          fc [-e ename] [-nlr] [first] [last]
          fc -s [pat=rep] [command]

Fix Command. In the first form, a range of commands from first to last is selected from the history list. Both first and last may be specified as a string (to locate the most recent command beginning with that string) or as a number (an index into the history list, where a negative number is used as an offset from the current command number). If last is not specified it is set to first. If first is not specified it is set to the previous command for editing and −16 for listing. If the -l flag is given, the commands are listed on standard output. The -n flag suppresses the command numbers when listing. The -r flag reverses the order of the listing. Otherwise, the editor given by ename is invoked on a file containing those commands. If ename is not given, the value of the following variable expansion is used: ${FCEDIT:-${EDITOR:-vi}}. This says to use the value of the FCEDIT variable if set, or the value of the EDITOR variable if that is set, or vi if neither is set. When editing is complete, the edited commands are echoed and executed.

In the second form, command is re-executed after each instance of pat in the selected command is replaced by rep.

A useful alias to use with the fc command is r='fc -s', so that typing ‘r cc’ runs the last command beginning with cc and typing ‘r’ re-executes the last command (see Aliases).

history
          history [n]
          history -c
          history -d offset
          history [-anrw] [filename]
          history -ps arg

With no options, display the history list with line numbers. Lines prefixed with a ‘*’ have been modified. An argument of n lists only the last n lines. If the shell variable HISTTIMEFORMAT is set and not null, it is used as a format string for strftime to display the time stamp associated with each displayed history entry. No intervening blank is printed between the formatted time stamp and the history line.

Options, if supplied, have the following meanings:

-c
Clear the history list. This may be combined with the other options to replace the history list completely.
-d offset
Delete the history entry at position offset. offset should be specified as it appears when the history is displayed.
-a
Append the new history lines (history lines entered since the beginning of the current Bash session) to the history file.
-n
Append the history lines not already read from the history file to the current history list. These are lines appended to the history file since the beginning of the current Bash session.
-r
Read the current history file and append its contents to the history list.
-w
Write out the current history to the history file.
-p
Perform history substitution on the args and display the result on the standard output, without storing the results in the history list.
-s
The args are added to the end of the history list as a single entry.

When any of the -w, -r, -a, or -n options is used, if filename is given, then it is used as the history file. If not, then the value of the HISTFILE variable is used.


Previous: Bash History Builtins, Up: Using History Interactively

9.3 History Expansion

The History library provides a history expansion feature that is similar to the history expansion provided by csh. This section describes the syntax used to manipulate the history information.

History expansions introduce words from the history list into the input stream, making it easy to repeat commands, insert the arguments to a previous command into the current input line, or fix errors in previous commands quickly.

History expansion takes place in two parts. The first is to determine which line from the history list should be used during substitution. The second is to select portions of that line for inclusion into the current one. The line selected from the history is called the event, and the portions of that line that are acted upon are called words. Various modifiers are available to manipulate the selected words. The line is broken into words in the same fashion that Bash does, so that several words surrounded by quotes are considered one word. History expansions are introduced by the appearance of the history expansion character, which is ‘!’ by default. Only ‘\’ and ‘'’ may be used to escape the history expansion character.

Several shell options settable with the shopt builtin (see Bash Builtins) may be used to tailor the behavior of history expansion. If the histverify shell option is enabled, and Readline is being used, history substitutions are not immediately passed to the shell parser. Instead, the expanded line is reloaded into the Readline editing buffer for further modification. If Readline is being used, and the histreedit shell option is enabled, a failed history expansion will be reloaded into the Readline editing buffer for correction. The -p option to the history builtin command may be used to see what a history expansion will do before using it. The -s option to the history builtin may be used to add commands to the end of the history list without actually executing them, so that they are available for subsequent recall. This is most useful in conjunction with Readline.

The shell allows control of the various characters used by the history expansion mechanism with the histchars variable.


Next: , Up: History Interaction

9.3.1 Event Designators

An event designator is a reference to a command line entry in the history list.

!
Start a history substitution, except when followed by a space, tab, the end of the line, ‘=’ or ‘(’ (when the extglob shell option is enabled using the shopt builtin).
!n
Refer to command line n.
!-n
Refer to the command n lines back.
!!
Refer to the previous command. This is a synonym for ‘!-1’.
!string
Refer to the most recent command starting with string.
!?string[?]
Refer to the most recent command containing string. The trailing ‘?’ may be omitted if the string is followed immediately by a newline.
^string1^string2^
Quick Substitution. Repeat the last command, replacing string1 with string2. Equivalent to !!:s/string1/string2/.
!#
The entire command line typed so far.


Next: , Previous: Event Designators, Up: History Interaction

9.3.2 Word Designators

Word designators are used to select desired words from the event. A ‘:’ separates the event specification from the word designator. It may be omitted if the word designator begins with a ‘^’, ‘$’, ‘*’, ‘-’, or ‘%’. Words are numbered from the beginning of the line, with the first word being denoted by 0 (zero). Words are inserted into the current line separated by single spaces.

For example,

!!
designates the preceding command. When you type this, the preceding command is repeated in toto.
!!:$
designates the last argument of the preceding command. This may be shortened to !$.
!fi:2
designates the second argument of the most recent command starting with the letters fi.

Here are the word designators:

0 (zero)
The 0th word. For many applications, this is the command word.
n
The nth word.
^
The first argument; that is, word 1.
$
The last argument.
%
The word matched by the most recent ‘?string?’ search.
x-y
A range of words; ‘-y’ abbreviates ‘0-y’.
*
All of the words, except the 0th. This is a synonym for ‘1-$’. It is not an error to use ‘*’ if there is just one word in the event; the empty string is returned in that case.
x*
Abbreviates ‘x-$
x-
Abbreviates ‘x-$’ like ‘x*’, but omits the last word.

If a word designator is supplied without an event specification, the previous command is used as the event.


Previous: Word Designators, Up: History Interaction

9.3.3 Modifiers

After the optional word designator, you can add a sequence of one or more of the following modifiers, each preceded by a ‘:’.

h
Remove a trailing pathname component, leaving only the head.
t
Remove all leading pathname components, leaving the tail.
r
Remove a trailing suffix of the form ‘.suffix’, leaving the basename.
e
Remove all but the trailing suffix.
p
Print the new command but do not execute it.
q
Quote the substituted words, escaping further substitutions.
x
Quote the substituted words as with ‘q’, but break into words at spaces, tabs, and newlines.
s/old/new/
Substitute new for the first occurrence of old in the event line. Any delimiter may be used in place of ‘/’. The delimiter may be quoted in old and new with a single backslash. If ‘&’ appears in new, it is replaced by old. A single backslash will quote the ‘&’. The final delimiter is optional if it is the last character on the input line.
&
Repeat the previous substitution.
g
a
Cause changes to be applied over the entire event line. Used in conjunction with ‘s’, as in gs/old/new/, or with ‘&’.
G
Apply the following ‘s’ modifier once to each word in the event.


Next: , Previous: Command Line Editing, Up: Top

10 Installing Bash

This chapter provides basic instructions for installing Bash on the various supported platforms. The distribution supports the gnu operating systems, nearly every version of Unix, and several non-Unix systems such as BeOS and Interix. Other independent ports exist for ms-dos, os/2, and Windows platforms.


Next: , Up: Installing Bash

10.1 Basic Installation

These are installation instructions for Bash.

The simplest way to compile Bash is:

  1. cd to the directory containing the source code and type ‘./configure’ to configure Bash for your system. If you're using csh on an old version of System V, you might need to type ‘sh ./configure’ instead to prevent csh from trying to execute configure itself.

    Running configure takes some time. While running, it prints messages telling which features it is checking for.

  2. Type ‘make’ to compile Bash and build the bashbug bug reporting script.
  3. Optionally, type ‘make tests’ to run the Bash test suite.
  4. Type ‘make install’ to install bash and bashbug. This will also install the manual pages and Info file.

The configure shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses those values to create a Makefile in each directory of the package (the top directory, the builtins, doc, and support directories, each directory under lib, and several others). It also creates a config.h file containing system-dependent definitions. Finally, it creates a shell script named config.status that you can run in the future to recreate the current configuration, a file config.cache that saves the results of its tests to speed up reconfiguring, and a file config.log containing compiler output (useful mainly for debugging configure). If at some point config.cache contains results you don't want to keep, you may remove or edit it.

To find out more about the options and arguments that the configure script understands, type

     bash-2.04$ ./configure --help

at the Bash prompt in your Bash source directory.

If you need to do unusual things to compile Bash, please try to figure out how configure could check whether or not to do them, and mail diffs or instructions to bash-maintainers@gnu.org so they can be considered for the next release.

The file configure.in is used to create configure by a program called Autoconf. You only need configure.in if you want to change it or regenerate configure using a newer version of Autoconf. If you do this, make sure you are using Autoconf version 2.50 or newer.

You can remove the program binaries and object files from the source code directory by typing ‘make clean’. To also remove the files that configure created (so you can compile Bash for a different kind of computer), type ‘make distclean’.


Next: , Previous: Basic Installation, Up: Installing Bash

10.2 Compilers and Options

Some systems require unusual options for compilation or linking that the configure script does not know about. You can give configure initial values for variables by setting them in the environment. Using a Bourne-compatible shell, you can do that on the command line like this:

     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure

On systems that have the env program, you can do it like this:

     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure

The configuration process uses GCC to build Bash if it is available.


Next: , Previous: Compilers and Options, Up: Installing Bash

10.3 Compiling For Multiple Architectures

You can compile Bash for more than one kind of computer at the same time, by placing the object files for each architecture in their own directory. To do this, you must use a version of make that supports the VPATH variable, such as GNU make. cd to the directory where you want the object files and executables to go and run the configure script from the source directory. You may need to supply the --srcdir=PATH argument to tell configure where the source files are. configure automatically checks for the source code in the directory that configure is in and in `..'.

If you have to use a make that does not supports the VPATH variable, you can compile Bash for one architecture at a time in the source code directory. After you have installed Bash for one architecture, use ‘make distclean’ before reconfiguring for another architecture.

Alternatively, if your system supports symbolic links, you can use the support/mkclone script to create a build tree which has symbolic links back to each file in the source directory. Here's an example that creates a build directory in the current directory from a source directory /usr/gnu/src/bash-2.0:

     bash /usr/gnu/src/bash-2.0/support/mkclone -s /usr/gnu/src/bash-2.0 .

The mkclone script requires Bash, so you must have already built Bash for at least one architecture before you can create build directories for other architectures.


Next: , Previous: Compiling For Multiple Architectures, Up: Installing Bash

10.4 Installation Names

By default, ‘make install’ will install into /usr/local/bin, /usr/local/man, etc. You can specify an installation prefix other than /usr/local by giving configure the option --prefix=PATH, or by specifying a value for the DESTDIRmake’ variable when running ‘make install’.

You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you give configure the option --exec-prefix=PATH, ‘make install’ will use PATH as the prefix for installing programs and libraries. Documentation and other data files will still use the regular prefix.


Next: , Previous: Installation Names, Up: Installing Bash

10.5 Specifying the System Type

There may be some features configure can not figure out automatically, but need to determine by the type of host Bash will run on. Usually configure can figure that out, but if it prints a message saying it can not guess the host type, give it the --host=TYPE option. ‘TYPE’ can either be a short name for the system type, such as ‘sun4’, or a canonical name with three fields: ‘CPU-COMPANY-SYSTEM’ (e.g., ‘i386-unknown-freebsd4.2’).

See the file support/config.sub for the possible values of each field.


Next: , Previous: Specifying the System Type, Up: Installing Bash

10.6 Sharing Defaults

If you want to set default values for configure scripts to share, you can create a site shell script called config.site that gives default values for variables like CC, cache_file, and prefix. configure looks for PREFIX/share/config.site if it exists, then PREFIX/etc/config.site if it exists. Or, you can set the CONFIG_SITE environment variable to the location of the site script. A warning: the Bash configure looks for a site script, but not all configure scripts do.


Next: , Previous: Sharing Defaults, Up: Installing Bash

10.7 Operation Controls

configure recognizes the following options to control how it operates.

--cache-file=file
Use and save the results of the tests in file instead of ./config.cache. Set file to /dev/null to disable caching, for debugging configure.
--help
Print a summary of the options to configure, and exit.
--quiet
--silent
-q
Do not print messages saying which checks are being made.
--srcdir=dir
Look for the Bash source code in directory dir. Usually configure can determine that directory automatically.
--version
Print the version of Autoconf used to generate the configure script, and exit.

configure also accepts some other, not widely used, boilerplate options. ‘configure --help’ prints the complete list.


Previous: Operation Controls, Up: Installing Bash

10.8 Optional Features

The Bash configure has a number of --enable-feature options, where feature indicates an optional part of Bash. There are also several --with-package options, where package is something like ‘bash-malloc’ or ‘purify’. To turn off the default use of a package, use --without-package. To configure Bash without a feature that is enabled by default, use --disable-feature.

Here is a complete list of the --enable- and --with- options that the Bash configure recognizes.

--with-afs
Define if you are using the Andrew File System from Transarc.
--with-bash-malloc
Use the Bash version of malloc in the directory lib/malloc. This is not the same malloc that appears in gnu libc, but an older version originally derived from the 4.2 bsd malloc. This malloc is very fast, but wastes some space on each allocation. This option is enabled by default. The NOTES file contains a list of systems for which this should be turned off, and configure disables this option automatically for a number of systems.
--with-curses
Use the curses library instead of the termcap library. This should be supplied if your system has an inadequate or incomplete termcap database.
--with-gnu-malloc
A synonym for --with-bash-malloc.
--with-installed-readline[=PREFIX]
Define this to make Bash link with a locally-installed version of Readline rather than the version in lib/readline. This works only with Readline 5.0 and later versions. If PREFIX is yes or not supplied, configure uses the values of the make variables includedir and libdir, which are subdirectories of prefix by default, to find the installed version of Readline if it is not in the standard system include and library directories. If PREFIX is no, Bash links with the version in lib/readline. If PREFIX is set to any other value, configure treats it as a directory pathname and looks for the installed version of Readline in subdirectories of that directory (include files in PREFIX/include and the library in PREFIX/lib).
--with-purify
Define this to use the Purify memory allocation checker from Rational Software.
--enable-minimal-config
This produces a shell with minimal features, close to the historical Bourne shell.

There are several --enable- options that alter how Bash is compiled and linked, rather than changing run-time features.

--enable-largefile
Enable support for large files if the operating system requires special compiler options to build programs which can access large files. This is enabled by default, if the operating system provides large file support.
--enable-profiling
This builds a Bash binary that produces profiling information to be processed by gprof each time it is executed.
--enable-static-link
This causes Bash to be linked statically, if gcc is being used. This could be used to build a version to use as root's shell.

The ‘minimal-config’ option can be used to disable all of the following options, but it is processed first, so individual options may be enabled using ‘enable-feature’.

All of the following options except for ‘disabled-builtins’ and ‘xpg-echo-default’ are enabled by default, unless the operating system does not provide the necessary support.

--enable-alias
Allow alias expansion and include the alias and unalias builtins (see Aliases).
--enable-arith-for-command
Include support for the alternate form of the for command that behaves like the C language for statement (see Looping Constructs).
--enable-array-variables
Include support for one-dimensional array shell variables (see Arrays).
--enable-bang-history
Include support for csh-like history substitution (see History Interaction).
--enable-brace-expansion
Include csh-like brace expansion ( b{a,b}c ==> bac bbc ). See Brace Expansion, for a complete description.
--enable-command-timing
Include support for recognizing time as a reserved word and for displaying timing statistics for the pipeline following time (see Pipelines). This allows pipelines as well as shell builtins and functions to be timed.
--enable-cond-command
Include support for the [[ conditional command. (see Conditional Constructs).
--enable-cond-regexp
Include support for matching POSIX regular expressions using the ‘=~’ binary operator in the [[ conditional command. (see Conditional Constructs).
--enable-debugger
Include support for the bash debugger (distributed separately).
--enable-directory-stack
Include support for a csh-like directory stack and the pushd, popd, and dirs builtins (see The Directory Stack).
--enable-disabled-builtins
Allow builtin commands to be invoked via ‘builtin xxx’ even after xxx has been disabled using ‘enable -n xxx’. See Bash Builtins, for details of the builtin and enable builtin commands.
--enable-dparen-arithmetic
Include support for the ((...)) command (see Conditional Constructs).
--enable-extended-glob
Include support for the extended pattern matching features described above under Pattern Matching.
--enable-help-builtin
Include the help builtin, which displays help on shell builtins and variables (see Bash Builtins).
--enable-history
Include command history and the fc and history builtin commands (see Bash History Facilities).
--enable-job-control
This enables the job control features (see Job Control), if the operating system supports them.
--enable-multibyte
This enables support for multibyte characters if the operating system provides the necessary support.
--enable-net-redirections
This enables the special handling of filenames of the form /dev/tcp/host/port and /dev/udp/host/port when used in redirections (see Redirections).
--enable-process-substitution
This enables process substitution (see Process Substitution) if the operating system provides the necessary support.
--enable-progcomp
Enable the programmable completion facilities (see Programmable Completion). If Readline is not enabled, this option has no effect.
--enable-prompt-string-decoding
Turn on the interpretation of a number of backslash-escaped characters in the $PS1, $PS2, $PS3, and $PS4 prompt strings. See Printing a Prompt, for a complete list of prompt string escape sequences.
--enable-readline
Include support for command-line editing and history with the Bash version of the Readline library (see Command Line Editing).
--enable-restricted
Include support for a restricted shell. If this is enabled, Bash, when called as rbash, enters a restricted mode. See The Restricted Shell, for a description of restricted mode.
--enable-select
Include the select builtin, which allows the generation of simple menus (see Conditional Constructs).
--enable-separate-helpfiles
Use external files for the documentation displayed by the help builtin instead of storing the text internally.
--enable-single-help-strings
Store the text displayed by the help builtin as a single string for each help topic. This aids in translating the text to different languages. You may need to disable this if your compiler cannot handle very long string literals.
--enable-strict-posix-default
Make Bash posix-conformant by default (see Bash POSIX Mode).
--enable-usg-echo-default
A synonym for --enable-xpg-echo-default.
--enable-xpg-echo-default
Make the echo builtin expand backslash-escaped characters by default, without requiring the -e option. This sets the default value of the xpg_echo shell option to on, which makes the Bash echo behave more like the version specified in the Single Unix Specification, version 3. See Bash Builtins, for a description of the escape sequences that echo recognizes.

The file config-top.h contains C Preprocessor ‘#define’ statements for options which are not settable from configure. Some of these are not meant to be changed; beware of the consequences if you do. Read the comments associated with each definition for more information about its effect.


Next: , Previous: Installing Bash, Up: Top

Appendix A Reporting Bugs

Please report all bugs you find in Bash. But first, you should make sure that it really is a bug, and that it appears in the latest version of Bash. The latest version of Bash is always available for FTP from ftp://ftp.gnu.org/pub/bash/.

Once you have determined that a bug actually exists, use the bashbug command to submit a bug report. If you have a fix, you are encouraged to mail that as well! Suggestions and `philosophical' bug reports may be mailed to bug-bash@gnu.org or posted to the Usenet newsgroup gnu.bash.bug.

All bug reports should include:

bashbug inserts the first three items automatically into the template it provides for filing a bug report.

Please send all reports concerning this manual to chet@po.CWRU.Edu.


Next: , Previous: Reporting Bugs, Up: Top

Appendix B Major Differences From The Bourne Shell

Bash implements essentially the same grammar, parameter and variable expansion, redirection, and quoting as the Bourne Shell. Bash uses the posix standard as the specification of how these features are to be implemented. There are some differences between the traditional Bourne shell and Bash; this section quickly details the differences of significance. A number of these differences are explained in greater depth in previous sections. This section uses the version of sh included in SVR4.2 (the last version of the historical Bourne shell) as the baseline reference.

More features unique to Bash may be found in Bash Features.

B.1 Implementation Differences From The SVR4.2 Shell

Since Bash is a completely new implementation, it does not suffer from many of the limitations of the SVR4.2 shell. For instance:


Next: , Previous: Major Differences From The Bourne Shell, Up: Top

Appendix C Copying This Manual


Up: Copying This Manual

C.1 GNU Free Documentation License

Version 1.2, November 2002
     Copyright © 2000,2001,2002 Free Software Foundation, Inc.
     59 Temple Place, Suite 330, Boston, MA  02111-1307, USA
     
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.
  1. PREAMBLE

    The purpose of this License is to make a manual, textbook, or other functional and useful document free in the sense of freedom: to assure everyone the effective freedom to copy and redistribute it, with or without modifying it, either commercially or noncommercially. Secondarily, this License preserves for the author and publisher a way to get credit for their work, while not being considered responsible for modifications made by others.

    This License is a kind of “copyleft”, which means that derivative works of the document must themselves be free in the same sense. It complements the GNU General Public License, which is a copyleft license designed for free software.

    We have designed this License in order to use it for manuals for free software, because free software needs free documentation: a free program should come with manuals providing the same freedoms that the software does. But this License is not limited to software manuals; it can be used for any textual work, regardless of subject matter or whether it is published as a printed book. We recommend this License principally for works whose purpose is instruction or reference.

  2. APPLICABILITY AND DEFINITIONS

    This License applies to any manual or other work, in any medium, that contains a notice placed by the copyright holder saying it can be distributed under the terms of this License. Such a notice grants a world-wide, royalty-free license, unlimited in duration, to use that work under the conditions stated herein. The “Document”, below, refers to any such manual or work. Any member of the public is a licensee, and is addressed as “you”. You accept the license if you copy, modify or distribute the work in a way requiring permission under copyright law.

    A “Modified Version” of the Document means any work containing the Document or a portion of it, either copied verbatim, or with modifications and/or translated into another language.

    A “Secondary Section” is a named appendix or a front-matter section of the Document that deals exclusively with the relationship of the publishers or authors of the Document to the Document's overall subject (or to related matters) and contains nothing that could fall directly within that overall subject. (Thus, if the Document is in part a textbook of mathematics, a Secondary Section may not explain any mathematics.) The relationship could be a matter of historical connection with the subject or with related matters, or of legal, commercial, philosophical, ethical or political position regarding them.

    The “Invariant Sections” are certain Secondary Sections whose titles are designated, as being those of Invariant Sections, in the notice that says that the Document is released under this License. If a section does not fit the above definition of Secondary then it is not allowed to be designated as Invariant. The Document may contain zero Invariant Sections. If the Document does not identify any Invariant Sections then there are none.

    The “Cover Texts” are certain short passages of text that are listed, as Front-Cover Texts or Back-Cover Texts, in the notice that says that the Document is released under this License. A Front-Cover Text may be at most 5 words, and a Back-Cover Text may be at most 25 words.

    A “Transparent” copy of the Document means a machine-readable copy, represented in a format whose specification is available to the general public, that is suitable for revising the document straightforwardly with generic text editors or (for images composed of pixels) generic paint programs or (for drawings) some widely available drawing editor, and that is suitable for input to text formatters or for automatic translation to a variety of formats suitable for input to text formatters. A copy made in an otherwise Transparent file format whose markup, or absence of markup, has been arranged to thwart or discourage subsequent modification by readers is not Transparent. An image format is not Transparent if used for any substantial amount of text. A copy that is not “Transparent” is called “Opaque”.

    Examples of suitable formats for Transparent copies include plain ascii without markup, Texinfo input format, LaTeX input format, SGML or XML using a publicly available DTD, and standard-conforming simple HTML, PostScript or PDF designed for human modification. Examples of transparent image formats include PNG, XCF and JPG. Opaque formats include proprietary formats that can be read and edited only by proprietary word processors, SGML or XML for which the DTD and/or processing tools are not generally available, and the machine-generated HTML, PostScript or PDF produced by some word processors for output purposes only.

    The “Title Page” means, for a printed book, the title page itself, plus such following pages as are needed to hold, legibly, the material this License requires to appear in the title page. For works in formats which do not have any title page as such, “Title Page” means the text near the most prominent appearance of the work's title, preceding the beginning of the body of the text.

    A section “Entitled XYZ” means a named subunit of the Document whose title either is precisely XYZ or contains XYZ in parentheses following text that translates XYZ in another language. (Here XYZ stands for a specific section name mentioned below, such as “Acknowledgements”, “Dedications”, “Endorsements”, or “History”.) To “Preserve the Title” of such a section when you modify the Document means that it remains a section “Entitled XYZ” according to this definition.

    The Document may include Warranty Disclaimers next to the notice which states that this License applies to the Document. These Warranty Disclaimers are considered to be included by reference in this License, but only as regards disclaiming warranties: any other implication that these Warranty Disclaimers may have is void and has no effect on the meaning of this License.

  3. VERBATIM COPYING

    You may copy and distribute the Document in any medium, either commercially or noncommercially, provided that this License, the copyright notices, and the license notice saying this License applies to the Document are reproduced in all copies, and that you add no other conditions whatsoever to those of this License. You may not use technical measures to obstruct or control the reading or further copying of the copies you make or distribute. However, you may accept compensation in exchange for copies. If you distribute a large enough number of copies you must also follow the conditions in section 3.

    You may also lend copies, under the same conditions stated above, and you may publicly display copies.

  4. COPYING IN QUANTITY

    If you publish printed copies (or copies in media that commonly have printed covers) of the Document, numbering more than 100, and the Document's license notice requires Cover Texts, you must enclose the copies in covers that carry, clearly and legibly, all these Cover Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on the back cover. Both covers must also clearly and legibly identify you as the publisher of these copies. The front cover must present the full title with all words of the title equally prominent and visible. You may add other material on the covers in addition. Copying with changes limited to the covers, as long as they preserve the title of the Document and satisfy these conditions, can be treated as verbatim copying in other respects.

    If the required texts for either cover are too voluminous to fit legibly, you should put the first ones listed (as many as fit reasonably) on the actual cover, and continue the rest onto adjacent pages.

    If you publish or distribute Opaque copies of the Document numbering more than 100, you must either include a machine-readable Transparent copy along with each Opaque copy, or state in or with each Opaque copy a computer-network location from which the general network-using public has access to download using public-standard network protocols a complete Transparent copy of the Document, free of added material. If you use the latter option, you must take reasonably prudent steps, when you begin distribution of Opaque copies in quantity, to ensure that this Transparent copy will remain thus accessible at the stated location until at least one year after the last time you distribute an Opaque copy (directly or through your agents or retailers) of that edition to the public.

    It is requested, but not required, that you contact the authors of the Document well before redistributing any large number of copies, to give them a chance to provide you with an updated version of the Document.

  5. MODIFICATIONS

    You may copy and distribute a Modified Version of the Document under the conditions of sections 2 and 3 above, provided that you release the Modified Version under precisely this License, with the Modified Version filling the role of the Document, thus licensing distribution and modification of the Modified Version to whoever possesses a copy of it. In addition, you must do these things in the Modified Version:

    1. Use in the Title Page (and on the covers, if any) a title distinct from that of the Document, and from those of previous versions (which should, if there were any, be listed in the History section of the Document). You may use the same title as a previous version if the original publisher of that version gives permission.
    2. List on the Title Page, as authors, one or more persons or entities responsible for authorship of the modifications in the Modified Version, together with at least five of the principal authors of the Document (all of its principal authors, if it has fewer than five), unless they release you from this requirement.
    3. State on the Title page the name of the publisher of the Modified Version, as the publisher.
    4. Preserve all the copyright notices of the Document.
    5. Add an appropriate copyright notice for your modifications adjacent to the other copyright notices.
    6. Include, immediately after the copyright notices, a license notice giving the public permission to use the Modified Version under the terms of this License, in the form shown in the Addendum below.
    7. Preserve in that license notice the full lists of Invariant Sections and required Cover Texts given in the Document's license notice.
    8. Include an unaltered copy of this License.
    9. Preserve the section Entitled “History”, Preserve its Title, and add to it an item stating at least the title, year, new authors, and publisher of the Modified Version as given on the Title Page. If there is no section Entitled “History” in the Document, create one stating the title, year, authors, and publisher of the Document as given on its Title Page, then add an item describing the Modified Version as stated in the previous sentence.
    10. Preserve the network location, if any, given in the Document for public access to a Transparent copy of the Document, and likewise the network locations given in the Document for previous versions it was based on. These may be placed in the “History” section. You may omit a network location for a work that was published at least four years before the Document itself, or if the original publisher of the version it refers to gives permission.
    11. For any section Entitled “Acknowledgements” or “Dedications”, Preserve the Title of the section, and preserve in the section all the substance and tone of each of the contributor acknowledgements and/or dedications given therein.
    12. Preserve all the Invariant Sections of the Document, unaltered in their text and in their titles. Section numbers or the equivalent are not considered part of the section titles.
    13. Delete any section Entitled “Endorsements”. Such a section may not be included in the Modified Version.
    14. Do not retitle any existing section to be Entitled “Endorsements” or to conflict in title with any Invariant Section.
    15. Preserve any Warranty Disclaimers.

    If the Modified Version includes new front-matter sections or appendices that qualify as Secondary Sections and contain no material copied from the Document, you may at your option designate some or all of these sections as invariant. To do this, add their titles to the list of Invariant Sections in the Modified Version's license notice. These titles must be distinct from any other section titles.

    You may add a section Entitled “Endorsements”, provided it contains nothing but endorsements of your Modified Version by various parties—for example, statements of peer review or that the text has been approved by an organization as the authoritative definition of a standard.

    You may add a passage of up to five words as a Front-Cover Text, and a passage of up to 25 words as a Back-Cover Text, to the end of the list of Cover Texts in the Modified Version. Only one passage of Front-Cover Text and one of Back-Cover Text may be added by (or through arrangements made by) any one entity. If the Document already includes a cover text for the same cover, previously added by you or by arrangement made by the same entity you are acting on behalf of, you may not add another; but you may replace the old one, on explicit permission from the previous publisher that added the old one.

    The author(s) and publisher(s) of the Document do not by this License give permission to use their names for publicity for or to assert or imply endorsement of any Modified Version.

  6. COMBINING DOCUMENTS

    You may combine the Document with other documents released under this License, under the terms defined in section 4 above for modified versions, provided that you include in the combination all of the Invariant Sections of all of the original documents, unmodified, and list them all as Invariant Sections of your combined work in its license notice, and that you preserve all their Warranty Disclaimers.

    The combined work need only contain one copy of this License, and multiple identical Invariant Sections may be replaced with a single copy. If there are multiple Invariant Sections with the same name but different contents, make the title of each such section unique by adding at the end of it, in parentheses, the name of the original author or publisher of that section if known, or else a unique number. Make the same adjustment to the section titles in the list of Invariant Sections in the license notice of the combined work.

    In the combination, you must combine any sections Entitled “History” in the various original documents, forming one section Entitled “History”; likewise combine any sections Entitled “Acknowledgements”, and any sections Entitled “Dedications”. You must delete all sections Entitled “Endorsements.”

  7. COLLECTIONS OF DOCUMENTS

    You may make a collection consisting of the Document and other documents released under this License, and replace the individual copies of this License in the various documents with a single copy that is included in the collection, provided that you follow the rules of this License for verbatim copying of each of the documents in all other respects.

    You may extract a single document from such a collection, and distribute it individually under this License, provided you insert a copy of this License into the extracted document, and follow this License in all other respects regarding verbatim copying of that document.

  8. AGGREGATION WITH INDEPENDENT WORKS

    A compilation of the Document or its derivatives with other separate and independent documents or works, in or on a volume of a storage or distribution medium, is called an “aggregate” if the copyright resulting from the compilation is not used to limit the legal rights of the compilation's users beyond what the individual works permit. When the Document is included an aggregate, this License does not apply to the other works in the aggregate which are not themselves derivative works of the Document.

    If the Cover Text requirement of section 3 is applicable to these copies of the Document, then if the Document is less than one half of the entire aggregate, the Document's Cover Texts may be placed on covers that bracket the Document within the aggregate, or the electronic equivalent of covers if the Document is in electronic form. Otherwise they must appear on printed covers that bracket the whole aggregate.

  9. TRANSLATION

    Translation is considered a kind of modification, so you may distribute translations of the Document under the terms of section 4. Replacing Invariant Sections with translations requires special permission from their copyright holders, but you may include translations of some or all Invariant Sections in addition to the original versions of these Invariant Sections. You may include a translation of this License, and all the license notices in the Document, and any Warranty Disclaimers, provided that you also include the original English version of this License and the original versions of those notices and disclaimers. In case of a disagreement between the translation and the original version of this License or a notice or disclaimer, the original version will prevail.

    If a section in the Document is Entitled “Acknowledgements”, “Dedications”, or “History”, the requirement (section 4) to Preserve its Title (section 1) will typically require changing the actual title.

  10. TERMINATION

    You may not copy, modify, sublicense, or distribute the Document except as expressly provided for under this License. Any other attempt to copy, modify, sublicense or distribute the Document is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

  11. FUTURE REVISIONS OF THIS LICENSE

    The Free Software Foundation may publish new, revised versions of the GNU Free Documentation License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. See http://www.gnu.org/copyleft/.

    Each version of the License is given a distinguishing version number. If the Document specifies that a particular numbered version of this License “or any later version” applies to it, you have the option of following the terms and conditions either of that specified version or of any later version that has been published (not as a draft) by the Free Software Foundation. If the Document does not specify a version number of this License, you may choose any version ever published (not as a draft) by the Free Software Foundation.

C.1.1 ADDENDUM: How to use this License for your documents

To use this License in a document you have written, include a copy of the License in the document and put the following copyright and license notices just after the title page:

       Copyright (C)  year  your name.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.2
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
       A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

If you have Invariant Sections, Front-Cover Texts and Back-Cover Texts, replace the “with...Texts.” line with this:

         with the Invariant Sections being list their titles, with
         the Front-Cover Texts being list, and with the Back-Cover Texts
         being list.

If you have Invariant Sections without Cover Texts, or some other combination of the three, merge those two alternatives to suit the situation.

If your document contains nontrivial examples of program code, we recommend releasing these examples in parallel under your choice of free software license, such as the GNU General Public License, to permit their use in free software.


Next: , Previous: Copying This Manual, Up: Top

Index of Shell Builtin Commands


Next: , Previous: Builtin Index, Up: Top

Index of Shell Reserved Words


Next: , Previous: Reserved Word Index, Up: Top

Parameter and Variable Index


Next: , Previous: Variable Index, Up: Top

Function Index


Previous: Function Index, Up: Top

Concept Index